Kaiser KCT 69..: EN

36 

EN 

Dual-circuit cut-off 

Depending on the design it is possible to operate dual 

circuit radiant heating elements with the Touch 

Control. 

When a multi-circuit heating element is put into 

operation, all heating circuits are switched- on at the 

same time.  

If only the inner heating circuits should be used, the 

outer heating circuit can be switched-off by means of 

the multi-circuit key or in individual steps. 



  By operating the multi-circuit key 

1

 the 

respective outer circuit of the assigned active 

cooking zone can be cut-off any time.  

An activated outer circuit will be indicated by an 

additional LED 

2

. 



 A renewed operation of the multi-circuit key will add 

the outer circuit(s) at any time.  

The assigned LED´s 

2 

glow again. 

Timer function 

The timer function is realized in two versions. 

Stand-alone timer 1 – 99 min: sound signal when the 

time is over «countdown tmer».  

This function is only available when the cooktop is not 

in operation, i.e. when there is no cooking, 

Cooking zone timer 1 – 99 min: sound signal when 

the time is over, four cooking zones can be 

programmed independently.

1 

2