Gigabyte GA-8IG1000MT: инструкция
Характеристики, спецификации
Инструкция к Материнской Плате Gigabyte GA-8IG1000MT
When you installing AGP card, please make sure the following notice
is fully understood and practiced. If your AGP card has "AGP 4X/8X
(1.5V) notch"(show below), please make sure your AGP card is AGP
4X/8X (1.5V).
AGP 4X/8X notch
®
Caution: AGP 2X card is not supported by Intel
845(GE/PE) / 845(E/G) /
850(E) /E7205 / 865(P/G/PE) / 875P. You might experience system unable
to boot up normally. Please insert an AGP 4X/8X card.
Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X
mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)
mode by adjusting the jumper. The factory default for this card is 2X(3.3V).
The GA-8IG1000MT motherboards might not function properly, if you install
this card without switching the jumper to 4X(1.5V) mode in it.
Example 2: Some ATi Rage 128 Pro graphics cards made by "Power Color",
the graphics card manufacturer & some SiS 305 cards, their golden finger is
compatible with 2X/4X mode AGP slot, but they support 2X(3.3V) only. The
GA-8IG1000MT motherboards might not function properly, If you install this
card in it.
Note : Although Gigabyte's AG32S(G) graphics card is based on ATi Rage
128 Pro chip, the design of AG32S(G) is compliance with AGP 4X(1.5V)
®
specification. Therefore, AG32S(G) will work fine with Intel
845(GE/PE) / 845
(E/G) / 850(E) /E7205 / 865(P/G/PE) / 875P based motherboards.
8ig1000mt_1001_f.p65 2003/4/15, 下午 03:081
The author assumes no responsibility for any errors or
omissions that may appear in this document nor does the
author make a commitment to update the information
contained herein.
Third-party brands and names are the property of their
respective owners.
Please do not remove any labels on motherboard, this may
void the warranty of this motherboard.
Due to rapid change in tec hnology, some of the
specifications might be out of date before publication of
this booklet.
8ig1000mt_1001_f.p65 2003/4/15, 下午 03:082
Declaration of Conformity
We, Manufacturer/Importer
(full address)
G.B.T. Technology Träding GMbH
Ausschlager Weg 41, 1F, 20537 Hamburg, Germany
declare that the product
( description of the apparatus, sy stem, installation to w hich it refers)
Mother Board
GA-8IG1000MT
is in conformity with
(reference to the specification under which conformity is declared)
in accordance with 89/336 EEC-EMC Directive
o EN 55011 Limits and methods of measurement
o EN 61000-3-2*
Disturbances in supply systems cause
of radio disturbance characteristics of
T EN 60555-2
by household appliances and similar
industrial,scientific and medical (ISM
electrical equipment “Harmonics”
high frequency equipment
o EN 55013
Limits and methods of measurement
o EN 61000-3-3* Disturbances in supply systems cause
of radio disturbance characteristics of
by household appliances and similar
T EN 60555-3
broadcast receivers and associated
electrical equipment “Voltage fluctuations”
equipment
o EN 55014 Limits and methods of measurement
T EN 50081-1
Generic emission standard Part 1:
of radio disturbance characteristics of
Residual commercial and light industry
household electrical appliances,
portable tools and similar electrical
T EN 50082-1
Generic immunity standard Part 1:
apparatus
Residual commercial and light industry
o EN 55015 Limits and methods of measurement
o EN 55081-2
Generic emission standard Part 2:
of radio disturbance characteristics of
Industrial environment
fluorescent lamps and luminaries
o EN 55020
Immunity from radio interference of
o EN 55082-2
Generic emission standard Part 2:
broadcast receivers and associated
Industrial environment
equipment
T EN 55022 Limits and methods of measurement
o ENV 55104
lmmunity requirements for household
of radio disturbance characteristics of
appliances tools and similar apparatus
information technology equipment
o DIN VDE 0855
Cabled distribution systems; Equipment
o EN50091-2
EMC requirements for uninterruptible
o part 10
for receiving and/or distribution from
power systems (UPS)
o part 12
sound and television signals
T CE marking
(EC conformity marking)
The manufacturer also declares the conformity of above mentioned product
with the actual required safety standards in accordance with LVD 73/23 EEC
o EN 60065
Safety requirements for mains operated
o EN 60950
Safety for information technology equipment
electronic and related apparatus for
including electrical bussiness equipment
household and similar general use
o EN 60335
Safety of household and similar
o EN 50091-1
General and Safety requirements for
electrical appliances
uninterruptible power systems (UPS)
Manufacturer/Importer
Signature:
Timmy Huang
Date : April 17, 2003
(Sta mp)
Name:
Timmy Huang
8ig1000mt_1001_f.p65 2003/4/15, 下午 03:083
DECLARATION OF CONFORMITY
Per FCC Part 2 Section 2.1077(a)
Responsible Party Name:
G.B.T. INC. (U.S.A.)
Address:
17358 Railroad Street
City of Industry, CA 91748
Phone/Fax No:
(818) 854-9338/ (818) 854-9339
hereby declares that the product
Product Name: Motherboard
Model Number: GA-8IG1000MT
Conforms to the following specifications:
FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109(a),
Class B Digital Device
Supplementary Information:
This device complies with part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not
cause harmful and (2) this device must accept any inference received,
including that may cause undesired operation.
Representative Person’s Name:
ERIC LU
Signature:
Eric Lu
Date:
April. 17, 2003
8ig1000mt_1001_f.p65 2003/4/15, 下午 03:084
GA-8IG1000MT
P4 Titan Series Motherboard
USER'S MANUAL
®
Pentium
4 Processor Motherboard
Rev. 1001
12ME-8IG1KMT-1001
Table of Content
English
Item Checklist ..................................................................................... 4
Chapter 1 Introduction ........................................................................ 5
Features Summary ......................................................................................... 5
GA-8IG1000MT Motherboard Layout ........................................................... 7
Block Diagram ................................................................................................ 8
Chapter 2 Hardware Installation Process ........................................... 11
Step 1: Install the Central Processing Unit (CPU) ...................................... 12
Step 1-1: CPU Installation ....................................................................................... 12
Step 1-2: CPU Cooling Fan Installation ................................................................... 13
Step 2: Install Memory Modules .................................................................. 14
Step 3: Install expansion cards .................................................................... 16
Step 4: Connect ribbon cables, cabinet wires and power supply............. 17
Step 4-1: I/O Back Panel Introduction ..................................................................... 17
Step 4-2: Connectors Introduction ........................................................................... 19
Chapter 3 BIOS Setup ...................................................................... 33
The Main Menu (For example: BIOS Ver. : E13) ....................................... 34
Standard CMOS Features ........................................................................... 36
Advanced BIOS Features ............................................................................. 39
Integrated Peripherals ................................................................................. 41
Power Management Setup .......................................................................... 46
PnP/PCI Configurations ................................................................................ 49
PC Health Status ........................................................................................... 50
- 2 -GA-8IG1000MT Motherboard
English
Frequency/Voltage Control ........................................................................... 52
Load Fail-Safe Defaults ................................................................................ 54
Load Optimized Defaults .............................................................................. 55
Set Supervisor/User Password..................................................................... 56
Save & Exit Setup .......................................................................................... 57
Exit Without Saving ....................................................................................... 58
Chapter 4 Technical Reference ......................................................... 61
™
@BIOS
Introduction .................................................................................... 61
™
EasyTune
4 Introduction ............................................................................ 62
Flash BIOS Method Introduction ................................................................. 63
2- / 4- / 6-Channel Audio Function Introuction ............................................ 67
Jack-Sensing Introuction ........................................................................... 73
Chapter 5 Appendix ......................................................................... 77
- 3 -
Table of Content