Gigabyte GA-8GE800 Pro: инструкция

When you installing AGP card, please make sure the following

notice is fully understood and practiced. If your AGP card has

"AGP 4X notch"(show below), please make sure your AGP card is

AGP 4X (1.5V).

®

Caution: AGP 2X card is not supported by Intel

845(GE/PE) /

845(E/G) / 850(E). You might experience system unable to boot up

normally. Please insert an AGP 4X card.

Example 1: Diamond Vipper V770 golden finger is compatible with 2X/4X

mode AGP slot. It can be switched between AGP 2X(3.3V) or 4X(1.5V)

mode by adjusting the jumper. The factory default for this card is

2X(3.3V). The GA-8GE800 Pro (or any AGP 4X only) motherboards

might not function properly, if you install this card without switching the

jumper to 4X(1.5) mode in it.

Example 2: Some ATi Rage 128 Pro graphics cards made by “Power

Color”, the graphics card manufacturer & some SiS 305 cards, their

golden finger is compatible with 2X(3.3V)/4X(1.5V) mode AGP slot, but

they support 2X(3.3V) only. The GA-8GE800 Pro (or any AGP 4X only)

motherboards might not function properly, If you install this card in it.

Note : Although Gigabyte's AG32S(G) graphics card is based on

ATi Rage 128 Pro chip, the design of AG32S(G) is compliance

with AGP 4X(1.5V) specification. Therefore, AG32S (G)will work

®

fine with Intel

845(GE/PE) /845(E/G) / 850(E) based motherboards.

Before you install PCI cards, please remove the Dual BIOS label from

PCI slots if there is one.

M The author assumes no responsibility for any errors

or omissions that may appear in this document nor

does the author make a commitment to update the

information contained herein.

M Third-party brands and names are the property of

their respective owners.

M Please do not remove any labels on motherboard, this

may void the warranty of this motherboard.

M Due to rapid change in technology, some of the

specifications might be out of date before publication

of this booklet.

Declaration of Conformity

We, Manufacturer/Importer

(full address)

G.B.T. Technology Träding GMbH

Ausschlager Weg 41, 1F, 20537 Hamburg, Germany

declare that the product

( description of the apparatus, system, installation to which it refers)

Mother Board

GA-8GE800 Pro

is in conformity with

(reference to the specification under which conformity is declared)

in accordance with 89/336 EEC-EMC Directive

o EN 55011 Limits and methods of measurement

o EN 61000-3-2*

Disturbances in supply systems cause

of radio disturbance characteristics of

T EN 60555-2

by household appliances and similar

industrial,scientific and medical (ISM

electrical equipment “Harmonics”

high frequency equipment

o EN 55013

Limits and methods of measurement

o EN 61000-3-3* Disturbances in supply systems cause

of radio disturbance characteristics of

by household appliances and similar

T EN 60555-3

broadcast receivers and associated

electrical equipment “Voltage fluctuations”

equipment

o EN 55014 Limits and methods of measurement

T EN 50081-1

Generic emission standard Part 1:

of radio disturbance characteristics of

Residual commercial and light industry

household electrical appliances,

portable tools and similar electrical

T EN 50082-1

Generic immunity standard Part 1:

apparatus

Residual commercial and light industry

o EN 55015 Limits and methods of measurement

o EN 55081-2

Generic emission standard Part 2:

of radio disturbance characteristics of

Industrial environment

fluorescent lamps and luminaries

o EN 55020

Immunity from radio interference of

o EN 55082-2

Generic emission standard Part 2:

broadcast receivers and associated

Industrial environment

equipment

T EN 55022 Limits and methods of measurement

o ENV 55104

lmmunity requirements for household

of radio disturbance characteristics of

appliances tools and similar apparatus

information technology equipment

o DIN VDE 0855

Cabled distribution systems; Equipment

o EN50091-2

EMC requirements for uninterruptible

o part 10

for receiving and/or distribution from

power systems (UPS)

o part 12

sound and television signals

T CE marking

(EC conformity marking)

The manufacturer also declares the conformity of above mentioned product

with the actual required safety standards in accordance with LVD 73/23 EEC

o EN 60065

Safety requirements for mains operated

o EN 60950

Safety for information technology equipment

electronic and related apparatus for

including electrical bussiness equipment

household and similar general use

o EN 60335

Safety of household and similar

o EN 50091-1

General and Safety requirements for

electrical appliances

uninterruptible power systems (UPS)

Manufacturer/Importer

Signature:

Timmy Huang

Date : January 24, 2003

Name:

Timmy Huang

(Stamp)

DECLARATION OF CONFORMITY

Per FCC Part 2 Section 2.1077(a)

Responsible Party Name:

G.B.T. INC. (U.S.A.)

Address:

17358 Railroad Street

City of Industry, CA 91748

Phone/Fax No:

(818) 854-9338/ (818) 854-9339

hereby declares that the product

Product Name:

Motherboard

Model Number:

GA-8GE800 Pro

Conforms to the following specifications:

FCC Part 15, Subpart B, Section 15.107(a) and Section 15.109

(a),Class B Digital Device

Supplementary Information:

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions: (1) This device may not

cause harmful and (2) this device must accept any inference received,

including that may cause undesired operation.

Representative Person’s Name:

ERIC LU

Signature:

Eric Lu

Date:

January 24, 2003

GA-8GE800 Pro

P4 Titan Motherboard

USER'S MANUAL

®

Pentium

4 Processor Motherboard

Rev. 1101

12ME-8GE800P-1101

Table of Content

English

Item Checklist ......................................................................................4

Chapter 1 Introduction .........................................................................5

Features Summary .................................................................................... 5

GA-8GE800 Pro Motherboard Layout ...................................................... 7

Block Diagram ............................................................................................ 8

Chapter 2 Hardware Installation Process ............................................ 10

Step 1: Install the Central Processing Unit (CPU) ..................................11

Step 1-1: CPU Installation ........................................................................................... 11

Step 1-2 : CPU Heat Sink Installation ..........................................................................12

Step 2: Install memory modules .............................................................. 13

Step 3: Install expansion cards ............................................................... 15

Step 4: Connect ribbon cables, cabinet wires, and power supply ........ 16

Step 4-1: I/O Back Panel Introduction ..........................................................................16

Step 4-2: Connectors & Jumper Setting Introduction ....................................................18

Chapter 3 BIOS Setup ....................................................................... 33

The Main Menu (For example: BIOS Ver. : E4) ..................................... 34

Standard CMOS Features ....................................................................... 36

Advanced BIOS Features ........................................................................ 39

Integrated Peripherals ............................................................................ 41

Power Management Setup ...................................................................... 46

- 2 -GA-8GE800 Pro Motherboard

English

PnP/PCI Configurations ........................................................................... 48

PC Health Status ..................................................................................... 49

Frequency/Voltage Control ...................................................................... 51

Top Performance ...................................................................................... 54

Select Language ...................................................................................... 55

Load Fail-Safe Defaults ........................................................................... 56

Load Optimized Defaults ......................................................................... 57

Set Supervisor/User Password ............................................................... 58

Save & Exit Setup .................................................................................... 59

Exit Without Saving ................................................................................. 60

Chapter 4 Technical Reference .......................................................... 63

TM

@ BIOS

Introduction ............................................................................. 63

TM

Easy Tune

4 Introduction ...................................................................... 64

TM

Face-Wizard

Utilities Installation ......................................................... 65

Flash BIOS Method Introduction ............................................................. 66

2-/4-/6-Channel Audio Function Introuction ............................................ 87

Chapter 5 Appendix ........................................................................... 95

- 3 -

Table of Content

Item Checklist

þ The GA-8GE800 Pro motherboard o 2 Port USB Cable x 1

English

þ IDE cable x 1/ Floppy cable x 1 þ 2 Port USB Cable x 2

þ CD for motherboard driver & utility þ SPDIF-KIT x 1 (SPDIF Out KIT)

þ GA-8GE800 Pro user's manual þ IEEE 1394 Cable x1

þ I/O Shield o Audio Combo Kit x 1

þ Quick PC Installation Guide (SURROUND-Kit + SPDIF Out KIT)

o RAID Manual þ Motherboard Settings Label

Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some precautions whenever you

work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do not have

one, touch both of your hands to a safely grounded object or to a metal object, such as

the power supply case.

3. Hold components by the edges and try not touch the IC chips, leads or connectors, or

other components.

4. Place components on a grounded antistatic pad or on the bag that came with the

components whenever the components are separated from the system.

5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX

ower connector on the motherboard.

Installing the motherboard to the chassis…

If the motherboard has mounting holes, but they don’t line up with the holes on the base and there

are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the

mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so

be careful of your hands). In this way you can still attach the motherboard to the base without worrying

about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the

motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the

screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it may

damage the board or cause board malfunctioning.

- 4 -GA-8GE800 Pro Motherboard

English

Chapter 1 Introduction

Features Summary

Form Factor — 30.5cm x 24.4cm ATX size form factor, 4 layers PCB.

®

®

CPU — Socket 478 for Intel

Micro FC-PGA2 Pentium

4 processor

®

®

— Support Intel

Pentium

4 (Northwood, 0.13 m) processor

®

®

— Support Intel

Pentium

4 Processor with HT Technology

®

— Intel Pentium

4 400/533MHz FSB

— 2nd cache depends on CPU

Chipset — Chipset Intel 845GE HOST/AGP/Controller

— ICH4 I/O Controller Hub

Memory — 3 184-pin DDR DIMM sockets

— Supports DDR333/DDR266 DIMM

— Supports up to 2GB DRAM (Max)

— Supports only 2.5V DDR DIMM

I/O Control — IT8712

Slots — 1 AGP slot 4X (1.5V) device support

— 5 PCI slot supports 33MHz & PCI 2.2 compliant

On-Board IDE — 2 IDE bus master (UDMA33/ATA66/ATA100) IDE ports

for up to 4 ATAPI devices

— Supports PIO mode3,4 (UDMA 33/ATA66/ATA100) IDE

& ATAPICD-ROM

On-Board Peripherals — 1 Floppy port supports 2 FDD with 360K, 720K,1.2M, 1.44M

and 2.88M bytes.

— 1 Parallel port supports Normal/EPP/ECP mode

— 1 Serial port (COMA), 1 VGA port, COMB on Board

— 6 USB 2.0/1.1 ports (2 x Rear, 4 xFront by cable)

— 1 Front Audio Connector

— 1 IrDA connector for IR/CIR

Hardware Monitor — CPU/Power/System Fan Revolution detect

— CPU/Power/System Fan Fail Warning

— CPU Overheat Warning

— System Voltage Detect

to be continued......

M Due to (Intel 845PE/GE/GV) chipset architecture limitation, DDR 333 memory module is

only supported when using FSB 533 Pentium 4 processor. A FSB 400 Pentium 4 processor

will only support DDR 266 memory module

Introduction- 5 -