Gigabyte 8VT800-RZ: Standard CMOS Features

Standard CMOS Features: Gigabyte 8VT800-RZ

English

Standard CMOS Features

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Standard CMOS Features

Date (mm:dd:yy) Fri, Jan 9 2004

Item Help

Time (hh:mm:ss) 22:31:24

Menu Level}

Change the day, month,

} IDE Primary Master [None]

year

} IDE Primary Slave [None]

} IDE Secondary Master [None]

<Week>

} IDE Secondary Slave [None]

Sun. to Sat.

Drive A [1.44M, 3.5"]

<Month>

Drive B [None]

Jan. to Dec.

Floppy 3 Mode Suport [Disabled]

<Day>

Holt On [All, But Keyboard]

1 to 31 (or maximum

allowed in the month)

Base Memory 640K

Extended Memory 127M

<Year>

Total Memory 128M

1999 to 2098

higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults

Date

The date format is <week>, <month>, <day>, <year>.

Week The week, from Sun to Sat, determined by the BIOS and is display only

Month The month, Jan. Through Dec.

Day The day, from 1 to 31 (or the maximum allowed in the month)

Year The year, from 1999 through 2098

Time

The times format in <hour> <minute> <second>. The time is calculated base on the 24-hour

military-time clock. For example, 1 p.m. is 13:00:00.

IDE Primary Master, Slave / IDE Secondary Master, Slave

The category identifies the types of hard disk from drive C to F that has been installed in the

computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto type

which will automatically detect HDD type.

Note that the specifications of your drive must match with the drive table. The hard disk will not work

properly if you enter improper information for this category.

If you select User Type, related information will be asked to enter to the following items. Enter the information

directly from the keyboard and press <Enter>. Such information should be provided in the documenta-

tion form your hard disk vendor or the system manufacturer.

Cylinder Number of cylinders

Head Number of heads

Precomp Write precomp

Landing Zone Landing zone

Sector Number of sectors

If a hard disk has not been installed, select NONE and press <Enter>.

- 23 - BIOS Setup

Drive A / Drive B

The category identifies the types of floppy disk drive A or drive B that has been installed in the

computer.

None No floppy drive installed

360K, 5.25" 5.25 inch PC-type standard drive; 360K byte capacity.

English

1.2M, 5.25" 5.25 inch AT-type high-density drive; 1.2M byte capacity

(3.5 inch when 3 Mode is Enabled).

720K, 3.5" 3.5 inch double-sided drive; 720K byte capacity

1.44M, 3.5" 3.5 inch double-sided drive; 1.44M byte capacity.

2.88M, 3.5" 3.5 inch double-sided drive; 2.88M byte capacity.

Floppy 3 Mode Support (for Japan Area)

Disabled Normal Floppy Drive. (Default value)

Drive A Drive A is 3 mode Floppy Drive.

Drive B Drive B is 3 mode Floppy Drive.

Both Drive A & B are 3 mode Floppy Drives.

Halt on

The category determines whether the computer will stop if an error is detected during power up.

No Errors The system boot will not stop for any error that may be detected and you

will be prompted.

All Errors Whenever the BIOS detects a non-fatal error the system will be stopped.

All, But Keyboard The system boot will not stop for a keyboard error; it will stop for all other

errors. (Default value)

All, But Diskette The system boot will not stop for a disk error; it will stop for all other errors.

All, But Disk/Key The system boot will not stop for a keyboard or disk error; it will stop for all

other errors.

Memory

The category is display-only which is determined by POST (Power On Self Test) of the BIOS.

Base Memory

The POST of the BIOS will determine the amount of base (or conventional) memory installed

in the system.

The value of the base memory is typically 512K for systems with 512K memory installed on

the motherboard, or 640K for systems with 640K or more memory installed on the motherboard.

Extended Memory

The BIOS determines how much extended memory is present during the POST.

This is the amount of memory located above 1 MB in the CPU's memory address map.

- 24 -8VT800-RZ/8VT800-RZ-C Motherboard