Gigabyte 8VT800-RZ: Integrated Peripherals
Integrated Peripherals: Gigabyte 8VT800-RZ
Integrated Peripherals
CMOS Setup Utility-Copyright (C) 1984-2004 Award Software
Integrated Peripherals
OnChip IDE Channel0 [Enabled]
Item Help
OnChip IDE Channel1 [Enabled]
Menu Level}
English
AC97 Audio [Auto]
VIA onboard LAN * [Enabled]
[Auto]
USB 1.1 Controller [Enabled]
Auto-detect IDE
USB 2.0 Controller [Enabled]
cable type
USB Keyboard Support [Disabled]
USB Mouse Support [Disabled]
[ATA66/100/133]
Onboard LAN Boot ROM * [Disabled]
Set Conductor cable
Onboard Serial Port 1 [3F8/IRQ4]
to ATA66/100/133(80
Onboard Serial Port 2 [2F8/IRQ3]
-pins)
UART Mode Select [Normal]
xUR2 Duplex Mode Half
[ATA33]
Onboard Parallel Port [378/IRQ7]
Set Conductor cable
Parallel Port Mode [SPP]
to ATA33(40-pins)
Game Port Address [201]
Midi Port Address [Disabled]
Midi Port IRQ 10
higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help
F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults
OnChip IDE Channel0
When enabled, allows you to use the onboard primary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enabled Enable onboard 1st channel IDE port. (Default value)
Disabled Disable onboard 1st channel IDE port.
OnChip IDE Channel1
When enabled, allows you to use the onboard secondary PCI IDE. If a hard disk controller card is
used, set at Disabled.
Enabled Enable onboard 2nd channel IDE port. (Default value)
Disabled Disable onboard 2nd channel IDE port.
AC97 Audio
Auto Enable onboard AC'97 audio function. (Default value)
Disabled Disable this function.
VIA onboard LAN *
Enable Enable onboard LAN function.(Default value)
Disable Disable onboard LAN function.
USB 1.1 Controller
Disable this option if you are not using the onboard USB feature.
Enabled Enable USB1.1 Controller. (Default value)
Disabled Disable USB1.1 Controller.
USB 2.0 Controller
Disable this option if you are not using the onboard USB 2.0 feature.
Enabled Enable USB 2.0 Controller. (Default value)
Disabled Disable USB 2.0 Controller.
"*" For 8VT800-RZ only.
- 26 -8VT800-RZ/8VT800-RZ-C Motherboard
English
USB Keyboard Support
Enabled Enable USB keyboard support.
Disabled Disable USB keyboard support. (Default value)
USB Mouse Support
Enabled Enable USB mouse support.
Disabled Disable USB mouse support. (Default value)
Onboard LAN Boot ROM *
This function decide whether to invoke the boot ROM of the onboard LAN chip.
Disabled Disable this function. (Default Value)
Enabled Enable this function.
Onboard Serial Port 1
Auto BIOS will automatically setup the port 1 address.
3F8/IRQ4 Enable onboard Serial port 1 and address is 3F8. (Default value)
2F8/IRQ3 Enable onboard Serial port 1 and address is 2F8.
3E8/IRQ4 Enable onboard Serial port 1 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 1 and address is 2E8.
Disabled Disable onboard Serial port 1.
Onboard Serial Port 2
Auto BIOS will automatically setup the port 2 address.
3F8/IRQ4 Enable onboard Serial port 2 and address is 3F8.
2F8/IRQ3 Enable onboard Serial port 2 and address is 2F8. (Default value)
3E8/IRQ4 Enable onboard Serial port 2 and address is 3E8.
2E8/IRQ3 Enable onboard Serial port 2 and address is 2E8.
Disabled Disable onboard Serial port 2.
UART Mode Select
This item allows you to determine which Infra Red(IR) function of Onboard I/O chip.
Normal Set onboard I/O chip UART to Normal Mode. (Default Value)
IrDA Set onboard I/O chip UART to IrDA Mode.
ASKIR Set onboard I/O chip UART to ASKIR Mode.
UR2 Duplex Mode
This feature allows you to seclect IR mode.
This function will available when "UART Mode Select" doesn't set at "Normal" nor "SCR".
Half IR Function Duplex Half. (Default Value)
Full IR Function Duplex Full.
Onboard Parallel port
378/IRQ7 Enable onboard LPT port and address is 378/IRQ7. (Default value)
278/IRQ5 Enable onboard LPT port and address is 278/IRQ5.
Disabled Disable onboard LPT port.
3BC/IRQ7 Enable onboard LPT port and address is 3BC/IRQ7.
Parallel Port Mode
SPP Using Parallel port as Standard Parallel Port. (Default value)
EPP Using Parallel port as Enhanced Parallel Port.
ECP Using Parallel port as Extended Capabilities Port.
ECP+EPP Using Parallel port as ECP & EPP mode.
"*" For 8VT800-RZ only.
- 27 - BIOS Setup
