Sharp CV-P10PR Climatiseur mobile: USING THE REMOTE CONTROL LOADING BATTERIES HOW TO USE THE REMOTE CONTROL

USING THE REMOTE CONTROL

LOADING BATTERIES

Remove the battery cover.

1

Insert two batteries.

(AAA(R03))

Battery cover

2

• Make sure the (+) and (-) polarities are cor-

rectly aligned.

• Lines will appear on the display when bat-

teries are properly installed.

Reattach the battery cover.

3

Press the RESET button using a thin

4

pointed implement.

NOTES:

• The battery life is approximately 1 year in normal

use.

• When replacing the batteries, always change

both and use the same type.

• If you will not be using the unit for a long time, re-

move the batteries from the remote control.

HOW TO USE THE REMOTE CONTROL

Point the remote control toward the Signal re-

ceiver and press the desired button. The unit

generates a beep when it receives the signal.

• Make sure nothing, such as curtains, blocks the

signal receiver window.

• The signal effective distance is 7 m.

CAUTION:

• Do not expose the receiver window to direct sun-

light. This may adversely affect its operation.

• Use of certain uorescent lamp in the same room

may interfere with transmission of the signal.

• Do not leave the remote control in direct sunlight

or near a heater. Protect the remote control from

moisture and shock.

To prevent the remote control from being

misplaced,hookittotheunitwhennotin

use.

When attached, to remove the remote control from

the unit, lift the remote control up slightly and pull it

out.

Remote control hook

GB-8

01_CV-P10PR_OM_EN.indd 8 14/08/29 16:42