Xoro HSD 8450: TROUBLESHOOTING

TROUBLESHOOTING

Check the following guide for the possible cause of a problem before contacting service.

Technical Support of Xoro/MAS:

• Tel.: +49 40 77 11 09 17

• Internet: www.xoro.de/support.htm

English

Symptom Correction

No power

• Check if AC adapter of power is connected securely.

• If powered with the battery, check if it is exhausted.

No sound

• Ensure that the equipment is connected properly

• Ensure that the input setttings for the TV and stereo

system are proper.

• Please make sure, that the audio track exists on the

disc.

No picture

• Ensure that the equipment is connected properly

• Ensure that the LCD is on.

No playback

• Condensation had formed, please wait 1 or 2 hours to

allow the player dry out

• Wrong disc, please use only DVD, CD or ISO Data disc

• The disc may be dirty and require cleaning.

• Ensure that the disc is installed with the label side up.

• The disc has too mny scratches.

• The DVD+/-RW should be finalized.

• Wrong region code by the Video-DVD

• Cancel the parental lock function or change the

parental lock level. (The Pre-set password is 8888).

Interference or

• Check TV type is correct: PAL/NTSC.

scrolling

• Adjust the vertical hold on your TV.

No subtitles

• Subtitles appear only with disc which contain them

• Wrong MPEG-4 subtitle format

• Please rename the MPEG-4 subtitle to the same movie

file name (for example movie.avi and movi.srt)

HSD 8450 45

TROUBLESHOOTING

Symptom Correction

No remote control

• Check the batteries in the remote control

• Are the polarities correct?

• Batteries are depleted. Please uses new one.

• Point the remote control unit at the Infrared sensor and

operate.

• Remove the obstacles between the remote control and

the Infred snesor

English

• Operate the remote control unit at a distance of not

more than 5 meters from the Infrared sensor.

Language can not be

• There is only one language on the on the disc

changed

recorded.

• Choose in the Title menu of the Video DVD the

language which do you want.

Angle can not be

• The angles may be recorded for only specific scences

changed

and are not normally everytime available.

No key operation

• Turn the unit off and then back to on after a couple of

minutes.

Y Pb Pr activation

• Please connect the video cable properly.

• Please pay attention to the colour coding of the cable.

• Select in the setup settings the option YUV.

• Change the source input on the TV set

CVBS, S-Video and

You had press the Video button during you uses the YUV,

SCART with distorted,

CVBS, SCART or S-Video output. Press the Video button

devided or no picture

again, until the correct system appears on the screen.

picture

Forget the password The master password is 8888. Please insert the password by

the Preference setup settings and the option Password

46 HSD 8450