Gigabyte GA-8IP775: Chapter 4 Appendix

English

Chapter 4 Appendix

4-1 Unique Software Utilities

4-1-1 Xpress Recovery Introduction

What is Xpress Recovery ?

Xpress Recovery is a utility used to back up and restore an OS partition.

If the hard drive is not working properly, the user can restore the drive to

its original state.

1. Supports FAT16, FAT32, and NTFS formats

2. Must be connected to the IDE1 Master

3. Allows installation of only one OS

4. Must be used with an IDE hard disk supporting HPA

5. The first partition must be set as the boot partition. When the boot partition is backed up,

please do not alter its size.

6. Xpress Recovery is recommended when using Ghost to return boot manager to NTFS

format.

How to use the Xpress Recovery

1. Boot from CD-ROM (BMP Mode)

Enter the BIOS menu, select "Advanced BIOS Feature" and set to boot from CD-ROM. Insert the

provided driver CD into your CD drive, then save and exit the BIOS menu. Once the computer has

restarted, the phrase "Boot from CD:" will appear at the bottom left-hand corner of the screen. When

"Boot from CD:" appears, press any key to enter Xpress Recovery.

Once you have completed this step, subsequent access to Xpress Recovery can also function by

pressing the F9 key during computer power on.

.

.

Verifying DMI Pool Data

Boot from CD:

Boot from CD:

Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.

1. Execute Backup Utility

2. Execute Restore Utility

3. Remove Backup Image

4. Set Password

5. Exit and Restart

Build 2011

Appendix- 55 -

2. Press F9 during powering on the computer. (Text Mode)

Press F9 during powering on the computer .

Award Modular BIOS v6.00PG, An Energy Star Al ly

English

Copyright (C) 1984-2004, Award Software, Inc.

Intel 865PE AGPSet BIOS for 8IPE1000MT F1

Check System Health OK

.

.

.

Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery

F9 For Xpress Recovery

08/16/2002-I845GE-6A69YG01C-00

Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.

1. Execute Backup Utility

2. Execute Restore Utility

3. Remove Backup Image

4. Set Password

5. Exit and Restart

1. If you have already entered Xpress Recovery by booting from the CD-ROM, you can

enter Xpress Recovery in the future by pressing the F9 key.

2. System storage capacity as well as drive reading/writing speed will affect backup speed.

3. It is recommended that Xpress Recovery be immediately installed after OS and all

required driver and software installations are complete.

GA-8IP775 Series Motherboard - 56 -

English

1. Execute Backup Utility:





 Press B to Backup your System or Esc to Exit

The backup utility will automatically scan your system and back up data as a backup image in your hard

drive.

Not all systems support access to Xpress Recovery by pressing the F9 key during computer

power on. If this is the case, please use the boot from CD-ROM method to enter Xpress

Recovery.

2. Execute Restore Utility:





 This program will recover your system to factory default.

Press R to restore your system back to factory default or press Esc to exit

Restores backup image to original state.

3. Remove Backup Image:





 Remove backup image. Are you sure? (Y/N)

Remove the backup image.

4. Set Password:





 Please input a 4-16 character long password (a-z or 0-9) or press Esc to exit

You can set a password to enter Xpress Recovery to protect your hard disk data. Once this is done,

password input will be required to enter Xpress Recovery during the next as well as subsequent system

restarts. If you wish to remove the need for password entry, please select "Set Password" and under

"New Password/Confirm Password", make sure there is no entry and then press "Enter" to remove

password requirement.

5. Exit and Restart:

Exit and restart your computer.

Appendix- 57 -

3. Press Y button on your keyboard after you are sure to update BIOS.

Then it will begin to update BIOS. The progress of updating BIOS will be shown at the same time.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF002A 256K

English

Keep DMI Data Enable

Updating BIOS Now

Do not trun off power or

>>>>>>>>>>>>>>>>>>>.........................

Update BIOS from Floppy

Save BIOS to Floppy

reset your system

Enter : Run :Move ESC:Reset F10:Power Off

Don't Turn Off Power or Reset System

at this stage!!

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF002A 256K

Keep DMI Data Enable

!! Copy BIOS completed - Pass !!

Update BIOS from Floppy

Save BIOS to Floppy

Please press any key to continue

Enter : Run :Move ESC:Reset F10:Power Off

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after

you exit Q-Flash.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF002A 256K

Keep DMI Data Enable

Are you sure to RESET ?

Update BIOS from Floppy

Save BIOS to Floppy

[Enter] to continure or [Esc] to abort...

Enter : Run :Move ESC:Reset F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel 845GE AGPSet BIOS for 8GE800 F4

The BIOS file

Check System Health OK

Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0)

becomes F4 after

<CPUID : 0F0A Patch ID : 0009>

Memory Testing : 122880K OK + 8192K Shared Memory

updating

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Q-Flash

03/18/2003-I845GE-6A69YG01C-00

6. Press Del to enter BIOS menu after system reboots and "Load BIOS Fail-Safe Defaults". See how

to Load BIOS Fail-Safe Defaults, please kindly refer to Step 6 to 7 in Part One.

Congratulation!! You have updated BIOS successfully!!

GA-8IP775 Series Motherboard - 64 -

TM

English

Method 2 : @BIOS

Utility

If you do not have a DOS startup disk, we recommend that you use the

new @BIOS utility. @BIOS allows users to update their BIOS under

Windows. Just select the desired @BIOS server to download the latest

version of BIOS.

Fig 1. Installing the @BIOS utility Fig 2. Installation Complete and Run @BIOS

Click Sart/ Programs/ GIGABYTE/@BIOS

Select @BIOS item than click Install

Fig 3. The @BIOS Utility Fig 4. Select the desired @BIOS server

Click "" Click "Update New BIOS"

1. Methods and steps:

I. Update BIOS through Internet

a. Click "Internet Update" icon

b. Click "Update New BIOS" icon

TM

c. Select @BIOS

sever

d. Select the exact model name on your motherboard

e. System will automatically download and update the BIOS.

II. Update BIOS NOT through Internet:

a. Do not click "Internet Update" icon

b. Click "Update New BIOS"

c. Please select "All Files" in dialog box while opening the old file.

d. Please search for BIOS unzip file, downloading from internet or any other methods (such as:

8IP775.E2).

e. Complete update process following the instruction.

Appendix- 65 -

III. Save BIOS

In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the

current BIOS version.

English

IV. Check out supported motherboard and Flash ROM:

In the very beginning, there is "About this program" icon shown in dialog box. It can help you check out

which kind of motherboard and which brand of Flash ROM are supported.

2. Note:

I. In method I, if it shows two or more motherboard's model names to be selected, please make

sure your motherboard's model name again. Selecting wrong model name will cause the

system unbooted.

II. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your

motherboard's. Otherwise, your system won't boot.

III. In method I, if the BIOS file you need cannot be found in @BIOSTM server, please go onto

Gigabyte's web site for downloading and updating it according to method II.

IV. Please note that any interruption during updating will cause system unbooted

GA-8IP775 Series Motherboard - 66 -

English

4-1-3 2 / 4 / 6 / 8 Channel Audio Function Introduction

The installation of windows 98SE/2K/ME/XP is very simple. Please follow next step to install the function!

Stereo Speakers Connection and Settings:

We recommend that you use the speaker with amplifier to acqiire the best sound effect if the stereo output is

applied.

STEP 1:

Connect the stereo speakers or earphone to "Line

Out".

Line Out

STEP 2 :

Following installation of the audio driver, you find a

icon a Sound Effect icon on the lower right hand

taskbar. Click the icon to select the function.

STEP 3:

Click "Speaker Configuration" then click on the left

selection bar and select "2CH Speaker" to complete

2 channel audio configuration.

Appendix- 67 -

4 Channel Analog Audio Output Mode

STEP 1 :

Connect the front channels to "Line Out",

English

the rear channels to "Line In".

Line Out Line In

STEP 2 :

Following installation of the audio driver, you find a

icon a Sound Effect icon on the lower right hand

taskbar. Click the icon to select the function.

STEP 3 :

Click "Speaker Configuration" and select the "UAJ

Function". Then click on the left selection bar and

select "4CH Speaker" to complete 4 channel audio

configuration.

GA-8IP775 Series Motherboard - 68 -

6 Channel Analog Audio Output Mode

English

Use the back audio panel to connect the audio output

without any additional module.

STEP 1 :

Connect the front channels to "Line Out",the rear

channels to "Line In", and the Center/Subwoofer chan-

Line In

nels to "MIC In".

MIC In

Line Out

STEP 2 :

Following installation of the audio driver, you find a

icon a Sound Effect icon on the lower right hand

taskbar. Click the icon to select the function.

STEP 3 :

Click "Speaker Configuration" and select the "UAJ

Function". Then click on the left selection bar and

select "6CH Speaker" to complete 6 channel audio

configuration.

Appendix- 69 -

8 Channel Audio Setup (using Audio Combo Kit, Optional Device):

(Audio Combo Kit offers SPDIF output, an optical and

English

coaxial cable and a Surround-Kit. The

Surround-Kit offers R/L surround, center/subwoofer

output and rear surround)

STEP 1 :

Secure the Audio Combo Kit at the panel on the back

of the case.

STEP 2 :

Connect the Surround-Kit to the SUR_CEN connector located on the motherboard.

STEP 3 :

There are two methods of 8 channel audio

configuration:

Method 1:

Connect the front channels to the "LINE OUT" port

located on the audio panel and the rear channels to

the Surround-Kit "REAR R/L" port. Connect the cen-

ter/subwoofer channels to the Surround-Kit "SUB

CENTER" and the R/L channels to the Surround-Kit

"SUR BACK" port.

GA-8IP775 Series Motherboard - 70 -

Method 2:

English

Connect the front channels to the "LINE OUT" port

located on the audio panel and the rear channels to

the "LINE IN" port. Connect the center/subwoofer

channels to the "MIC IN" port located on the audio

panel and the R/L channels to the Surround-Kit "SUR

BACK" port. (This method requires UAJ function)

STEP 4 :

Following installation of the audio driver, you find a

icon a Sound Effect icon on the lower right hand

taskbar. Click the icon to select the function.

STEP 5 :

Click "Speaker Configuration" and select both the

"UAJ Function" and "Only Surround-Kit". Then click

on the left selection bar and select "8CH Speaker" to

complete 8 channel audio configuration.

Sound Effect Configuration:

At the sound effect menu, users can adjust

sound option settings as desired.

Appendix- 71 -

SPDIF Output Device (Optional Device)

A "SPDIF output" device is available on the

motherboard. Cable with rear bracket is provided and

English

could link to the "SPDIF output" connector (As picture.)

For the further linkage to decoder, rear bracket pro-

vides coaxial cable and Fiber

connecting port.

1. Connect the SPDIF output device to the rear

bracket of PC, and fix it with screw.

2. Connect SPDIF device to the motherboard.

3. Connect SPDIF to the SPDIF decoder.

GA-8IP775 Series Motherboard - 72 -

English

4-1-4 Jack-Sensing and UAJ Introduction

Jack-Sensing provides audio connectors error-detection function.

Install Microsoft DirectX8.1 or later version before to enable Jack-Sensing support for Windows

98/98SE/2000/ME.

Jack-Sensing includes 2 parts: AUTO and MANUAL. Following is an example for 2 channels (Windows XP):

Introduction of audio connectors

You may connect CDROM, Walkman or others audio

input devices to Line In jack, speakers, earphone or

others output devices to Line Out jack, and micro-

phone to MIC In jack.

Auto-detecting:

Please connect the devices to the right jacks as

above. A window will appear as right

picture if you setup the devices properly.

Please note that 3D audio function will only

appear when 3D audio inputs.

Appendix- 73 -

 

 

 China

 Australia

 

 

NINGBO G.B.T. TECH. TRADING CO., LTD.

GIGABYTE TECHNOLOGY PTY. LTD.

Tech. Support :

Tech. Support :

http://cn.giga-byte.com/TechSupport/ServiceCenter.htm

http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm

English

Non-Tech. Support(Sales/Marketing) :

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

http://ggts.gigabyte.com.tw/nontech.asp

WEB address : http://www.gigabyte.com.cn

WEB address : http://www.giga-byte.com.au

Shanghai

 France

 

 

TEL: +86-021-63410999

GIGABYTE TECHNOLOGY FRANCES S.A.R.L.

FAX: +86-021-63410100

Tech. Support :

Beijing

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

TEL: +86-010-82886651

Non-Tech. Support(Sales/Marketing) :

FAX: +86-010-82888013

http://ggts.gigabyte.com.tw/nontech.asp

Wuhan

WEB address : http://www.gigabyte.fr

TEL: +86-027-87851061

 Russia

 

 

FAX: +86-027-87851330

Moscow Representative Office Of Giga-Byte Technology Co.,

GuangZhou

Ltd.

TEL: +86-020-87586074

Tech. Support :

FAX: +86-020-85517843

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Chengdu

Non-Tech. Support(Sales/Marketing) :

TEL: +86-028-85236930

http://ggts.gigabyte.com.tw/nontech.asp

FAX: +86-028-85256822

WEB address : http://www.gigabyte.ru

Xian

 Poland

 

 

TEL: +86-029-85531943

Representative Office Of Giga-Byte Technology Co., Ltd.

FAX: +86-029-85539821

POLAND

Shenyang

Tech. Support :

TEL: +86-024-23960918

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

FAX: +86-024-23960918-809

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

WEB address : http://www.gigabyte.pl

GA-8IP775 Series Motherboard - 80 -