Gigabyte GA-8I845GV: Item Checklist

Item Checklist

The GA-8I845GV Series motherboard

Serial ATA cable x 2

CD for motherboard driver & utility

2 Port USB Cable x 1

English

4 Port USB Cable x 1

GA-8I845GV Series user's manual

SPDIF-Kit x 1 (SPDIF Out Kit)

Quick PC Installation Guide

IEEE 1394 Cable x1

SATA RAID Manual

Audio Combo Kit x 1

GC-SATA Card (optional)

(Manual; SATA cable x 1; Power cable x 1)

(SURROUND-Kit + SPDIF Out Kit)

Motherboard Settings Label

I/O Shield

IDE cable x 1 / Floppy cable x 1

WARNING!

Computer motherboards and expansion cards contain very delicate Integrated Circuit (IC) chips. To

protect them against damage from static electricity, you should follow some precautions whenever you

work on your computer.

1. Unplug your computer when working on the inside.

2. Use a grounded wrist strap before handling computer components. If you do not have one, touch

both of your hands to a safely grounded object or to a metal object, such as the power supply

case.

3. Hold components by the edges and try not touch the IC chips, leads or connectors, or other

components.

4. Place components on a grounded antistatic pad or on the bag that came with the components

whenever the components are separated from the system.

5. Ensure that the ATX power supply is switched off before you plug in or remove the ATX power

connector on the motherboard.

Installing the motherboard to the chassis…

If the motherboard has mounting holes, but they don't line up with the holes on the base and there

are no slots to attach the spacers, do not become alarmed you can still attach the spacers to the

mounting holes. Just cut the bottom portion of the spacers (the spacer may be a little hard to cut off, so

be careful of your hands). In this way you can still attach the motherboard to the base without worrying

about short circuits. Sometimes you may need to use the plastic springs to isolate the screw from the

motherboard PCB surface, because the circuit wire may be near by the hole. Be careful, don't let the

screw contact any printed circuit write or parts on the PCB that are near the fixing hole, otherwise it

may damage the board or cause board malfunctioning.

- 4 -GA-8I845GV Series Motherboard