Beko WKD 75100: 6 Quick instructions for daily use

6 Quick instructions for daily use

Preparation

programstarts).Atthebeginning

1. Turn the tap on completely. Check if

of a washing cycle (machine allows

the hoses are connected tightly.

adding more laundry during a future

2. Placethelaundryinthemachine.

step only if the water level is low

3. Add detergent and softener.

enough to open the loading door or

Starting

if the temperature in the machine is

1. Pressthe“On/Off”button(Figure

low).

2-14).

In order to add laundry after the

2. Select the program and the

start-upoftheprogram:

temperature.

1. Press“Start/Pause/Cancel”button

3. If desired (according to your

(Figure2-10).

machine’smodel):

2. Opentheloadingdoorandputin

– select any auxiliary function,

more laundry.

– adjust the spin speed,

3. Close the loading door.

– set the time delay,

4. Press“Start/Pause/Cancel”button

4. Close the loading door.

(Figure2-10).

5. Press“Start/Pause/Cancel”button

Program is in rinse hold mode

(Figure2-10).

C This process is shown with the

The display shows the time remaining

flashingspinsymbol(Figure3-13c)

for the program to complete if time delay

and the standby symbol (Figure

is not set.

3-13k)whichislitup.

The display shows the time remaining

If you wish to spin when the machine is

for the program to start if the time delay

inthismode:

is set.

1. Adjust the spin speed.

6. Check if the Door Locked Symbol

2. Press“Start/Pause/Cancel”

(Figure3-13i)lightsuponthe

button(Figure2-10).Theprogram

screen.

continues, pumps out the water and

TheDoorLockedSymbol(Figure3-13i)

spins.

will light up if time delay is not set.

3. Thestandbysymbol(Figure3-13k)

TheDoorLockedSymbol(Figure3-13i)

fades out and the start symbol

will fade if time delay is set.

(Figure3-13j)lightsup.

Cancelling a program

If you want to discharge the water

1. Pressandholdthe“Start/Pause/

withoutspinning:

Cancel”button(Figure2-10)for

1. Press“Start/Pause/Cancel”button

about3seconds;theStartsymbol

(Figure2-10).

(Figure3-13j)willstartflashing.

2. Thestandbysymbol(Figure3-13k)

2. The machine can discharge all

fades out and the start symbol

the water or can take in water for

(Figure3-13j)lightsup.

3 times at most to cool down the

3. The program continues and only

clothes and complete discharging

pumps out the water.

process.

Re-spinning the laundry

Adding more laundry

The control system for an unbalanced

• This is only possible under the

load can pause the spinning in cases

followingconditions:

when the distribution of the laundry in

– during time delay,

the drum is not balanced.

C Youmayaddorremovelaundry

Ifyouwanttore-spintheclothes:

during the time delay (until the

1. Distribute the laundry in your