Yamaha A-S700: Installing batteries in the remote Using the remote control control

CONTROLS AND FUNCTIONS

Installing batteries in the remote

Using the remote control

control

The remote control transmits a directional infrared beam.

Be sure to aim the remote control directly at the remote

control sensor on the front panel of this unit during

1

operation.

3

2

Within 6m

1 Press the part and slide the battery

(20 ft)

compartment cover off.

2 Insert two supplied batteries

(AA, R6, UM-3) according to the polarity

markings (+ and –) on the inside of the

battery compartment.

■ Handling the remote control

• The area between the remote control and this unit must

be clear of large obstacles.

3 Slide the cover back until it snaps into place.

• Do not spill water or other liquids on the remote

control.

■ Notes on batteries

• Do not drop the remote control.

• Change both batteries when the operation range of the

• Do not leave or store the remote control in the

remote control decreases.

following types of conditions:

• Use AA, R6, UM-3 batteries.

– high humidity, such as near a bath

• Make sure that the polarities are correct. See the

– high temperature, such as near a heater or a stove

illustration inside the battery compartment.

– extremely low temperatures

• Remove the batteries if the remote control is not to be

– dusty places

used for an extended period of time.

• Do not expose the remote control sensor to strong

• Do not use old batteries together with new ones.

lighting, in particular, an inverter type fluorescent

• Do not use different types of batteries (such as alkaline

lamp; otherwise, the remote control may not work

and manganese batteries) together. Read the packaging

properly. If necessary, position the unit away from

carefully as these different types of batteries may have

direct lighting.

the same shape and color.

• If the batteries have leaked, dispose of them

immediately. Avoid touching the leaked material or

letting it come into contact with clothing, etc. Clean the

battery compartment thoroughly before installing new

batteries.

• Do not throw away batteries with general house waste;

dispose of them correctly in accordance with your local

regulations.

4 En