Siemens TK 54001: Preparing hot water Steam for heating drinks Steam for foaming milk

en

Preparing hot water



! Risk of scalding

When the dial 8 is set to g/h, the nozzle

The appliance must be ready for use. This

9 may sputter. Escaping steam is very hot

function allows water to be heated for a cup

and may cause liquids to sputter. Do not

of tea, for example.

touch the nozzle 9 or aim it at anyone.



! Risk of burns

●Rotatethecupslowlyuntilthemilkisfully

The nozzle gets very hot. Do not touch the

foamed.

metal parts!

●Endtheprocessbyturningthedial8

●Placeanappropriatecupunderthe

back to O.

nozzle 9.

●Pushthesleeveonthenozzle9 all the

Note: When the nozzle 9 has cooled

way down.

down, clean it immediately. Dried residue is

●Turnthedial8 to g/h.

difculttoremove.



! Risk of scalding

Tip: If possible, use cold low-fat (1.5% fat)

When the dial 8 is set to g/h, the nozzle

milk.

may sputter a little. Do not touch the nozzle

9 or aim it at anyone.

Steam for heating drinks

●Endtheprocessbyturningthedial8

back to O.



! Risk of burns

The nozzle gets very hot. Do not touch the

metal parts!

Steam for foaming milk

The appliance must be ready for use.

The appliance must be ready for use. You

●Pushthesleeveonthenozzle9 all the

canfoamthemilkrstandaddthecoffee

way up.

on top, or foam the milk separately and

●Pressthehbutton.Itwillstarttoash.

pour it into the coffee.

i The appliance will now heat up for

approx. 20 seconds.



! Risk of burns

●Immersethenozzle9 deep into the liquid

The nozzle gets very hot. Do not touch the

you want to heat.

metal parts!

●Whentheh button lights up and 8

●Pushthesleeveonthenozzle9 all the

appears on the display, turn dial 8 to g/

way down.

h.

●Fillthecupapproximately1/3fullofmilk.

●Pressthehbutton.Itwillstarttoash.



! Risk of scalding

i The appliance will heat up for approx. 20

When the dial 8 is set to g/h, the nozzle

seconds.

9 may sputter a little. Escaping steam is

●Immersethenozzle9 deep into the milk,

very hot and may cause liquid to sputter.

but do not let it touch the bottom of the

Do not touch the nozzle 9 or aim it at

cup.

anyone.

●Whentheh button lights up and 8

●Endtheprocessbyturningthedial8

appears on the display, turn the dial 8 to

back to O.

g/h.

Note: When the nozzle 9 has cooled down,

cleanimmediately.Driedresidueisdifcult

to remove.

15