Siemens DE2427415: Operating instructions Safety information Your new appliance Operating the continuous-flow heater Customer Service

11

en

Operating instructions

Please read the operating instructions carefully before 

you use the appliance!

Safety information

This appliance is intended for domestic use or for house-

■

hold-based non-commercial applications. Household-

based applications include, e.g. usage in employees 

catering facilities for shops, offices, agricultural and 

other commercial operations, as well as usage by guests 

of guest houses, small hotels and similar residential 

establishments.

Risk of electric shock!

Switch off the mains voltage supply immediately if 

a fault occurs.

We do not accept liability for damage resulting from 

■

failure to heed these instructions.

The continuous-flow heater may only be connected 

■

and put into operation by a qualified professional.

Repairs may only be undertaken by a suitably qualified 

■

specialist to avoid potential sources of danger.

The continuous-flow heater may only be installed in a 

■

frost-free room.

Persons (including children) with diminished bodily, sen-

■

sory or mental perception, or those who lack knowledge or 

experience should not operate the appliance, unless they 

are monitored or have received instruction concerning use 

of the appliance by persons responsible for their safety.

Keep children away from the appliance. Please moni-

■

tor children to ensure that they do not play with the 

appliance.

The mixer and the warm water pipe may be hot.

■

Please switch off all fuses immediately if a malfunction 

■

occurs. Immediately shut off the cold water supply to the 

appliance should it leak. The malfunction can only be re-

paired by a specialist or an authorised service agent.

Your new appliance

The electronic continuous-flow heater “electronic comfort” is 

intended exclusively for heating water which flows through 

the appliance.

The continuous-flow heater switches on and heats the water 

when the warm water tap is opened. It switches off as soon 

as the tap is closed.

Operating the continuous-flow 

heater

Selecting shower temperature

You can select the desired temperature by turning the con-

tinuously variable rotary knob, which can be adjusted from 

30 °C to 60 °C.

Conserving energy and water

Mixing in of cold water in the fitting requires unnecessary 

water and energy. You should therefore set the desired tem-

perature directly on the continuous-flow heater and then 

open the water tap.

In “e” position the appliance is operated economically.

Using the appliance after switching off 

the water supply

Switch off the appliance (unscrew the fuse in the house 

■

electrical installation).

Open the warm water tap and keep it open until the air 

■

has been completely forced out of the water pipe.

Switch the fuse back on again.

■

The appliance is now ready to operate.

Cleaning

Only wipe off the appliance using a moist cloth. Do not 

■

use acidic or abrasive cleaning materials.

Do not use a steam cleaner.

■

Customer Service

We ask you to always provide the E-No. and the FD-No. of 

your appliance when calling in a customer service engineer. 

You will find the numbers on the inner side of the fold up 

operating panel on the continuous-flow heater.