Gigabyte GA-8I865GVMF-775: Chapter 4 Appendix

Chapter 4 Appendix: Gigabyte GA-8I865GVMF-775

English

Chapter 4 Appendix

4-1 Unique Software Utilities

4-1-1 Xpress Recovery Introduction

What is Xpress Recovery ?

Xpress Recovery is a utility used to back up and restore an OS partition.

If the hard drive is not working properly, the user can restore the drive to

its original state.

1. Supports FAT16, FAT32, and NTFS formats

2. Must be connected to the IDE1 Master

3. Allows installation of only one OS

4. Must be used with an IDE hard disk supporting HPA

5. The first partition must be set as the boot partition. When the boot partition is backed up,

please do not alter its size.

6. Xpress Recovery is recommended when using Ghost to return boot manager to NTFS

format.

How to use the Xpress Recovery

1. Boot from CD-ROM (BMP Mode)

Enter the BIOS menu, select "Advanced BIOS Feature" and set to boot from CD-ROM. Insert the

provided driver CD into your CD drive, then save and exit the BIOS menu. Once the computer has

restarted, the phrase "Boot from CD:" will appear at the bottom left-hand corner of the screen. When

"Boot from CD:" appears, press any key to enter Xpress Recovery.

Once you have completed this step, subsequent access to Xpress Recovery can also function by

pressing the F9 key during computer power on.

.

.

Verifying DMI Pool Data

Boot from CD:

Boot from CD:

Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.

1. Execute Backup Utility

2. Execute Restore Utility

3. Remove Backup Image

4. Set Password

5. Exit and Restart

Build 2011

Appendix- 49 -

2. Press F9 during powering on the computer. (Text Mode)

Press F9 during powering on the computer .

Award Modular BIOS v6.00PG, An Energy Star Al ly

English

Copyright (C) 1984-2004, Award Software, Inc.

Intel 865PE AGPSet BIOS for 8IPE1000MT F1

Check System Health OK

.

.

.

Press DEL to enter SETUP / Q-Flash, F9 For Xpress Recovery

F9 For Xpress Recovery

08/16/2002-I845GE-6A69YG01C-00

Xpress Recovery V1.0 (C) Copy Right 2003. GIGABYTE Technology CO. , Ltd.

1. Execute Backup Utility

2. Execute Restore Utility

3. Remove Backup Image

4. Set Password

5. Exit and Restart

1. If you have already entered Xpress Recovery by booting from the CD-ROM, you can enter

Xpress Recovery in the future by pressing the F9 key.

2. System storage capacity as well as drive reading/writing speed will affect backup speed.

3. It is recommended that Xpress Recovery be immediately installed after OS and all required

driver and software installations are complete.

GA-8I865GVM(F)-775 Motherboard - 50 -

English

1. Execute Backup Utility:

! Press B to Backup your System or Esc to Exit

The backup utility will automatically scan your system and back up data as a backup image in your hard

drive.

Not all systems support access to Xpress Recovery by pressing the F9 key during computer power

on. If this is the case, please use the boot from CD-ROM method to enter Xpress Recovery.

2. Execute Restore Utility:

! This program will recover your system to factory default.

Press R to restore your system back to factory default or press Esc to exit

Restores backup image to original state.

3. Remove Backup Image:

! Remove backup image. Are you sure? (Y/N)

Remove the backup image.

4. Set Password:

! Please input a 4-16 character long password (a-z or 0-9) or press Esc to exit

You can set a password to enter Xpress Recovery to protect your hard disk data. Once this is done,

password input will be required to enter Xpress Recovery during the next as well as subsequent system

restarts. If you wish to remove the need for password entry, please select "Set Password" and under

"New Password/Confirm Password", make sure there is no entry and then press "Enter" to remove

password requirement.

5. Exit and Restart:

Exit and restart your computer.

Appendix- 51 -

4-1-2 Flash BIOS Method Introduction

TM

Method 1 : Q-Flash

Utility

TM

Q-Flash

is a BIOS flash utility embedded in Flash ROM. With this utility,

English

users only have to stay in the BIOS menu when they want to update

TM

BIOS. Q-Flash

allows users to flash BIOS without any utility in DOS or

TM

Windows. Using Q-Flash

indicating no more fooling around with any complicated instructions and

operating system since it is in the BIOS menu.

Please note that because updating BIOS has potential risk, please do it with caution!! We are

sorry that Gigabyte Technology Co., Ltd is not responsible for damages of system because of

incorrect manipulation of updating BIOS to avoid any claims from end-users.

Before You Begin:

TM

Before you start updating BIOS with the Q-Flash

utility, please follow the steps below first.

1. Download the latest BIOS for your motherboard from Gigabyte's website.

2. Extract the BIOS file downloaded and save the BIOS file (the one with model name.Fxx. For example,

8KNXPU.Fba) to a floppy disk.

3. Reboot your PC and press Del to enter BIOS menu.

The BIOS upgrading guides below are separated into two parts.

If your motherboard has dual-BIOS, please refer to Part One.

If your motherboard has single-BIOS, please refer to Part Two.

Part One:

TM

Updating BIOS with Q-Flash

Utility on Dual BIOS Motherboards.

Some of Gigabyte motherboards are equipped with dual BIOS. In the BIOS menu of the motherboards

supporting Q-Flash and Dual BIOS, the Q-Flash utility and Dual BIOS utility are combined in the same

screen. This section only deals with how to use Q-Flash utility.

In the following sections, we take GA-8KNXP Ultra as the example to guide you how to flash BIOS

from an older version to the latest version. For example, from Fa3 to Fba.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel i875P AGPset BIOS for 8KNXP Ultra Fa3

The BIOS file is Fa3

Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

before updating

<CPUID : 0F27 Patch ID : 0027>

Memory Testing : 131072K OK

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For

Xpress Recovery

08/07/2003-i875P-6A79BG03C-00

GA-8I865GVM(F)-775 Motherboard - 52 -

TM

English

Entering the Q-Flash

utility:

Step1: To use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

} Standard CMOS Features

Select Language

} Advanced BIOS Features

Load Fail-Safe Defaults

} Integrated Peripherals

Load Optimized Defaults

} Power Management Setup

Set Supervisor Password

} PnP/PCI Configurations

Set User Password

} PC Health Status

Save & Exit Setup

} MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Step 2: Press F8 button on your keyboard and then Y button to enter the Dual BIOS/Q-Flash utility.

TM

Exploring the Q-Flash

/ Dual BIOS utility screen

The Q-Flash / Dual BIOS utility screen consists of the following key components.

Dual BIOS Utility

Dual BIOS utility bar

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Task menu for

Wide Range Protection Disable

Dual BIOS

Boot From Main Bios

Auto Recovery Enable

utility

Halt On Error Disable

Copy Main ROM Data to Backup

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

TM

Q-Flash

utility title

Load Main BIOS from Floppy

Task menu for

bar

Load Backup BIOS from Floppy

TM

Save Main BIOS to Floppy

Q-Flash

utility

Save Backup BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

Action bar

Task menu for Dual BIOS utility:

Contains the names of eight tasks and two item showing information about the BIOS ROM type. Blocking a

task and pressing Enter key on your keyboard to enable execution of the task.

Task menu for Q-Flash utility:

Contains the names of four tasks. Blocking a task and pressing Enter key on your keyboard to enable execu-

tion of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash/Dual BIOS utility. Pressing the buttons

mentioned on your keyboards to perform these actions.

Appendix- 53 -

TM

Using the Q-Flash

utility:

This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin"

section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your

computer. If you have already put the floppy disk into your system and have entered the Q-Flash utility,

English

please follow the steps below to flash BIOS.

Steps:

1. Press arrow buttons on your keyboard to move the light bar to "Load Main BIOS from Floppy" item in

the Q-Flash menu and press Enter button.

Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save Main

BIOS to Floppy" item.

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file,

8KNXPU.Fba, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

1 file(s) found

8KNXPU.Fba 512K

BIOS file in the floppy

Auto Recovery Enable

Halt On Error Disable

disk.

Total size : 1.39M Free size : 911.50K

Copy Main ROM Data to Backup

F5 : Refresh DEL : Delete

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

Reading BIOS file from floppy ...

Auto Recovery Enable

Do not trun off power or

>>>>>>>>>>>>>>.....................

Halt On Error Disable

reset your system at this

Copy Main ROM Data to Backup

Don't Turn Off Power or Reset System

Load Default Settings

stage!!

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

GA-8I865GVM(F)-775 Motherboard - 54 -

3. Press Y button on your keyboard after you are sure to update BIOS.

English

Then it will begin to update BIOS. The progress of updating BIOS will be displayed.

Please do not take out the floppy disk when it begins flashing BIOS.

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

You can repeat Step 1 to

Boot From Main Bios

!! Copy BIOS completed - Pass !!

Auto Recovery Enable

4 to flash the backup

Halt On Error Disable

BIOS, too.

Copy Main ROM Data to Backup

Please press any key to continue

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after

you exit Q-Flash.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

Auto Recovery Enable

Are you sure to RESET ?

Halt On Error Disable

Copy Main ROM Data to Backup

[Enter] to continure or [Esc] to abort...

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel i875P AGPset BIOS for 8KNXP Ultra Fba

The BIOS file

Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

becomes Fab after

<CPUID : 0F27 Patch ID : 0027>

Memory Testing : 131072K OK

updating.

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For Xpress Recovery

09/23/2003-i875P-6A79BG03C-00

Appendix- 55 -

6. Press Del to enter BIOS menu after system reboots. When you are in BIOS menu, move to

Load Fail-Safe Defaults item and press Enter to load BIOS Fail-Safe Defaults. Normally the system

redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the

BIOS defaults after BIOS has been upgraded.

English

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

} Standard CMOS Features

Select Language

} Advanced BIOS Features

Load Fail-Safe Defaults

} Integrated Peripherals

Load Optimized Defaults

} Power Management Setup

Load Fail-Safe Defaults (Y/N)? Y

Set Supervisor Password

} PnP/PCI Configurations

Set User Password

} PC Health Status

Save & Exit Setup

} MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Press Y on your keyboard to load defaults.

7. Select Save & Exit Setup item to save the settings to CMOS and exit the BIOS menu.

System will reboot after you exit the BIOS menu. The procedure is completed.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

} Standard CMOS Features

Select Language

} Advanced BIOS Features

Load Fail-Safe Defaults

} Integrated Peripherals

Load Optimized Defaults

} Power Management Setup

Save to CMOS and EXIT (Y/N)? Y

Set Supervisor Password

} PnP/PCI Configurations

Set User Password

} PC Health Status

Save & Exit Setup

} MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Press Y on your keyboard to save and exit.

Part Two:

TM

Updating BIOS with Q-Flash

Utility on Single-BIOS Motherboards.

TM

This part guides users of single-BIOS motherboards how to update BIOS using the Q-Flash

utility.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

} Standard CMOS Features

Top Performance

} Advanced BIOS Features

Load Fail-Safe Defaults

} Integrated Peripherals

Load Optimized Defaults

} Power Management Setup

Set Supervisor Password

} PnP/PCI Configurations

Set User Password

} PC Health Status

Save & Exit Setup

} MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

GA-8I865GVM(F)-775 Motherboard - 56 -

TM

English

Exploring the Q-Flash

utility screen

The Q-FlashBIOS utility screen consists of the following key components.

TM

Q-Flash Utility V1.30

Q-Flash

utility bar

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

Task menu for

Update BIOS from Floppy

TM

Q-Flash

utility

Save BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

Action bar

Task menu for Q-Flash utility:

Contains the names of three tasks. Blocking a task and pressing Enter key on your keyboard to enable

execution of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash utility. Pressing the buttons mentioned on

your keyboards to perform these actions.

TM

Using the Q-Flash

utility:

This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin"

section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your

computer. If you have already put the floppy disk into your system and have entered the Q-Flash utility,

please follow the steps below to flash BIOS.

Steps:

1. Press arrow buttons on your keyboard to move the light bar to "Update BIOS from Floppy" item in the

Q-Flash menu and press Enter button.

Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save BIOS

to Floppy" item.

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file,

8GE800.F4, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

1 file(s) found

Keep DMI Data Enable

8GE800.F4 256K

BIOS file in the floppy

Update BIOS from Floppy

Save BIOS to Floppy

disk.

Total size : 1.39M Free size : 1.14M

Enter : Run hi:Move ESC:Reset F10:Power Off

F5 : Refresh DEL : Delete

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

Reading BIOS file from floppy ...

Do not trun off power or

Update BIOS from Floppy

>>>>>>>>>>>>>>.....................

reset your system at

Save BIOS to Floppy

Enter : Run hi:Move ESC:Reset F10:Power Off

Don't Turn Off Power or Reset System

this stage!!

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

Please do not take out the floppy disk when it begins flashing BIOS.

Appendix- 57 -

3. Press Y button on your keyboard after you are sure to update BIOS.

Then it will begin to update BIOS. The progress of updating BIOS will be shown at the same time.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

English

Keep DMI Data Enable

Updating BIOS Now

Do not trun off power or

>>>>>>>>>>>>>>>>>>>.........................

Update BIOS from Floppy

Save BIOS to Floppy

reset your system

Enter : Run hi:Move ESC:Reset F10:Power Off

Don't Turn Off Power or Reset System

at this stage!!

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

!! Copy BIOS completed - Pass !!

Update BIOS from Floppy

Save BIOS to Floppy

Please press any key to continue

Enter : Run hi:Move ESC:Reset F10:Power Off

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after

you exit Q-Flash.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

Are you sure to RESET ?

Update BIOS from Floppy

Save BIOS to Floppy

[Enter] to continure or [Esc] to abort...

Enter : Run hi:Move ESC:Reset F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel 845GE AGPSet BIOS for 8GE800 F4

The BIOS file

Check System Health OK

Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0)

becomes F4 after

<CPUID : 0F0A Patch ID : 0009>

Memory Testing : 122880K OK + 8192K Shared Memory

updating

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Q-Flash

03/18/2003-I845GE-6A69YG01C-00

6. Press Del to enter BIOS menu after system reboots and "Load BIOS Fail-Safe Defaults". See how

to Load BIOS Fail-Safe Defaults, please kindly refer to Step 6 to 7 in Part One.

Congratulation!! You have updated BIOS successfully!!

GA-8I865GVM(F)-775 Motherboard - 58 -

TM

English

Method 2 : @BIOS

Utility

If you do not have a DOS startup disk, we recommend that you use the

new @BIOS utility. @BIOS allows users to update their BIOS under

Windows. Just select the desired @BIOS server to download the latest

version of BIOS.

Fig 1. Installing the @BIOS utility Fig 2. Installation complete and run @BIOS

Click Sart/ Programs/ GIGABYTE/@BIOS

Select @BIOS item.

Fig 3. The @BIOS utility Fig 4. Select the desired @BIOS server

Click "P" Click "Update New BIOS"

1. Methods and steps:

I. Update BIOS through Internet

a. Click "Internet Update" icon

b. Click "Update New BIOS" icon

TM

c. Select @BIOS

sever

d. Select the exact model name on your motherboard

e. System will automatically download and update the BIOS.

II. Update BIOS NOT through Internet:

a. Do not click "Internet Update" icon

b. Click "Update New BIOS"

c. Please select "All Files" in dialog box while opening the old file.

d. Please search for BIOS unzip file, downloading from internet or any other methods (such as:

8I865GVM-775.E2).

e. Complete update process following the instruction.

Appendix- 59 -

III. Save BIOS

In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save the

current BIOS version.

English

IV. Check out supported motherboard and Flash ROM:

In the very beginning, there is "About this program" icon shown in dialog box. It can help you check out

which kind of motherboard and which brand of Flash ROM are supported.

2. Note:

I. In method I, if it shows two or more motherboard's model names to be selected, please make

sure your motherboard's model name again. Selecting wrong model name will cause the

system unbooted.

II. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your

motherboard's. Otherwise, your system won't boot.

TM

III. In method I, if the BIOS file you need cannot be found in @BIOS

server, please go onto

Gigabyte's web site for downloading and updating it according to method II.

IV. Please note that any interruption during updating will cause system unbooted

GA-8I865GVM(F)-775 Motherboard - 60 -

English

4-1-3 2- / 4- / 5.1- Channel Audio Function Introduction

You are able to use 2-/4-/5.1-channnels audio feature by audio software selection.

The installation of audio software for Windows 98/ 2000/ ME/ XP is very simple. Please follow the steps to

install the function. (Following pictures are in Windows XP)

Stereo Speakers Connection and Settings:

We recommend that you use the speaker with amplifier to acquire the best sound effect if the stereo output

is applied.

STEP 1:

Connect the stereo speakers or earphone to "Line

Out".

Line Out

STEP 2 :

After you install the audio driver, you will find the

"SoundMAX Control Panel" icon in the status area

on the lower right of the screen. Right-click the icon

to select "SoundMAX Control Panel" or "Preferences".

STEP 3:

On the "Preferences" menu, click the "Listening

Environment" tab. In the "Speaker Setup" box, click

"Stereo Headphones" or "Stereo Speakers" and then

click "Apply". You will find a headphone or stereo

speakers icon on the SoundMAX menu. This com-

pletes the headphone or stereo speakers setup.

Appendix- 61 -

4 Channel Audio Setup

STEP 1 :

Connect the Front Speakers to "Line Out", the Rear

English

Speakers to "Line In".

Line In (Rear Speaker Out)

Line Out (Front Speaker Out)

Mic In

STEP 2 :

After you install the audio driver, you will find the

"SoundMAX Control Panel" icon in the status area

on the lower right of the screen. Right-click the icon

to select "SoundMAX Control Panel" or "Preferences".

STEP 3:

On the "Preferences" menu, click the "Listening

Environment" tab. In the "Speaker Setup" box, click

"Multi-drive" and then click "Apply". You will find a

multi-driver icon on the SoundMAX menu. This com-

pletes the 4-channel audio configuration.

GA-8I865GVM(F)-775 Motherboard - 62 -

English

5.1 Channel Audio Setup

STEP 1 :

Connect the Front Speakers to "Line Out", the Sur-

round Speakers to "Line In", and the Center/

Subwoofer Speakers to "MIC In".

Line In (Surround Speaker Out)

Line Out (Front Speaker Out)

Mic In (Center/Subwoofer Speaker Out)

STEP 2 :

After you install the audio driver, you will find the

"SoundMAX Control Panel" icon in the status area

on the lower right of the screen. Right-click the icon

to select "SoundMAX Control Panel" or "Preferences".

STEP 3:

On the "Preferences" menu, click the "Listening

Environment" tab. In the "Speaker Setup" box, click

"Surround Sound Speakers (5.1 Surround)" and then

click "Apply". You will find a surround sound speakers

icon on the SoundMAX menu. This completes the 5.1

channel audio configuration.

Sound Effect Configuration:

At the "Acoustic Environments" menu, users can

adjust sound option settings as desired.

Appendix- 63 -

SPDIF Output Device (Optional Device)

A " S/PDIF outp ut" d evice is available on the

motherboard. Cable with rear bracket is provided and

English

could link to the "S/PDIF output" connector (As

picture.) For the further linkage to decoder, rear

bracket provides coaxial cable and Fiber connecting

port.

1.

Connect the SPDIF output device to the rear bracket

of PC, and fix it with screw.

2.

Connect SPDIF wire to the motherboard.

3.

Connect co-axial or optical output to the AC3 decoder.

GA-8I865GVM(F)-775 Motherboard - 64 -

English

4-2 Troubleshooting

Below is a collection of general asked questions. To check general asked questions based on a specific

motherboard model, please log on to http://tw.giga-byte.com/faq/faq.htm

Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why?

Answer: Some advanced options are hidden in new BIOS version. Please press Ctrl and F1 keys after

entering BIOS menu and you will be able to see these options.

Questions 2: Why is the light of my keyboard/optical mouse still on after computer shuts down?

Answer: In some boards, a small amount of electricity is kept on standby after computer shuts down and

that's why the light is still on.

Question 3: Why cannot I use all functions in EasyTune 4?

Answer: The availability of the listed functions in EasyTune 4 depends on the MB chipset. If the chipset

doesn't support certain functions in EasyTune 4, these functions will be locked automatically and you will not

be able to use them.

Question 4: Why do I fail to install RAID and ATA drivers under Win 2000 and XP on boards that support

RAID function after I connect the boot HDD to IDE3 or IDE4 ?

Answer: First of all, you need to save some files in the CD-ROM to a floppy disk before installing drivers. You

also need to go through some rather different steps in the installation process. Therefore, we suggest that

you refer to the installation steps in the RAID manual at our website.

(Please download it at http://tw.giga-byte.com/support/user_pdf/raid_manual.pdf)

Question 5: How do I clear CMOS?

Answer: If your board has a Clear CMOS jumper, please refer to the Clear CMOS steps in the manual. If your

board doesn't have such jumper, you can take off the on-board battery to leak voltage to clear CMOS.

Please refer to the steps below:

Steps:

1. Turn off power.

2. Disconnect the power cord from MB.

3. Take out the battery gently and put it aside for about 10 minutes (Or you can use a metal object to

connect the positive and negative pins in the battery holder to makethem short for one minute).

4. Re-insert the battery to the battery holder.

5. Connect power cord to MB again and turn on power.

6. Press Del to enter BIOS and load Fail-Safe Defaults.

7. Save changes and reboot the system.

Question 6: Why does system seem unstable after updating BIOS?

Answer: Please remember to load Fail-Safe Defaults (Or Load BIOS Defaults) after flashing BIOS. However,

if the system instability still remains, please clear CMOS to solve the problem.

Question 7: Why do I still get a weak sound after turning up the speaker to the maximum volume?

Answer: Please make sure the speaker you are using is equipped with an internal amplifier. If not, please

change another speaker with power/amplifier and try again later.

Question 8: How do I disable onboard VGA card in order to add an external VGA card?

Answer: Gigabyte motherboards will auto-detect the external VGA card after it is plugged in, so you don't

need to change any setting manually to disable the onboard VGA.

Appendix- 65 -

Question 9: Why cannot I use the IDE 2?

Answer: Please refer to the user manual and check whether you have connected any cable that is not

provided with the motherboard package to the USB Over Current pin in the Front USB Panel. If the cable is

your own cable, please remove it from this pin and do not connect any of your own cables to it.

English

Question 10: Sometimes I hear different continuous beeps from computer after system boots up. What do

these beeps usually stand for?

Answer: The beep codes below may help you identify the possible computer problems. However, they are

only for reference purposes. The situations might differ from case to case.

gAMI BIOS Beep Codes

g AWARD BIOS Beep Codes

*

Computer gives 1 short beep when system boots successfully.

1 short: System boots successfully

*Except for beep code 8, these codes are always fatal.

2 short: CMOS setting error

1 beep Refresh failure

1 long 1 short: DRAM or M/B error

2 beeps Parity error

1 long 2 short: Monitor or display card error

3 beeps Base 64K memory failure

1 long 3 short: Keyboard error

4 beeps Timer not operational

1 long 9 short: BIOS ROM error

5 beeps Processor error

Continuous long beeps: DRAM error

6 beeps 8042 - gate A20 failure

Continuous short beeps: Power error

7 beeps Processor exception interrupt error

8 beeps Display memory read/write failure

9 beeps ROM checksum error

10 beeps CMOS shutdown register read/write error

11 beeps Cache memory bad

Question 11:For the M/B which have RAID function, how to set in the BIOS in order to bootup from IDE3, 4

by either RAID or ATA mode?

Answer:Please set in the BIOS as follow:

1. Advanced BIOS features-->(SATA)/RAID/SCSI boot order: "SATA"

2. Advanced BIOS features--> First boot device: "SCSI"

3. Integrated Peripherals--> Onboard H/W ATA/RAID: "enable"

Then it depends on the RAID mode that you need to set "RAID" to RAID mode or "ATA" to normal ATA mode

in the item named RAID controller function.

Question 12:How to set in the BIOS to bootup from the IDE/ SCSI/ RAID card ?

Answer:Please set in the BIOS as follow:

1. Advanced BIOS features-->(SATA)/RAID/SCSI boot order: "SCSI"

2. Advanced BIOS features--> First boot device: "SCSI"

Then it depends on the mode(RAID or ATA) that you need to set in RAID/ SCSI BIOS.

GA-8I865GVM(F)-775 Motherboard - 66 -

English

Appendix- 67 -

English

GA-8I865GVM(F)-775 Motherboard - 68 -

English

Appendix- 69 -

English

GA-8I865GVM(F)-775 Motherboard - 70 -

English

Contact Us

Taiwan (Headquarters)

Japan

GIGA-BYTE TECHNOLOGY CO., LTD.

NIPPON GIGA-BYTE CORPORATION

Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei Hsien,

WEB address : http://www.gigabyte.co.jp

Taiwan.

Singapore

TEL: +886 (2) 8912-4888

GIGA-BYTE SINGAPORE PTE. LTD.

FAX: +886 (2) 8912-4003

Tech. Support :

Tech. Support :

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support(Sales/Marketing) :

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

http://ggts.gigabyte.com.tw/nontech.asp

U.K.

WEB address (English): http://www.gigabyte.com.tw

G.B.T. TECH. CO., LTD.

WEB address (Chinese): http://chinese.giga-byte.com

Address: GUnit 13 Avant Business Centre 3 Third Avenue,

U.S.A.

Denbigh West Bletchley Milton Keynes, MK1 1DR, UK, England

G.B.T. INC.

TEL: +44-1908-362700

Address: 17358 Railroad St, City of Industry, CA 91748.

FAX: +44-1908-362709

TEL: +1 (626) 854-9338

Tech. Support :

FAX: +1 (626) 854-9339

http://uk.giga-byte.com/TechSupport/ServiceCenter.htm

Tech. Support :

Non-Tech. Support(Sales/Marketing) :

http://www.giga-byte.com/TechSupport/ServiceCenter.htm

http://ggts.gigabyte.com.tw/nontech.asp

Non-Tech. Support(Sales/Marketing) :

WEB address : http://uk.giga-byte.com

http://ggts.gigabyte.com.tw/nontech.asp

The Netherlands

WEB address : http://www.giga-byte.com

GIGA-BYTE TECHNOLOGY B.V.

Germany

TEL: +31 40 290 2088

G.B.T. TECHNOLOGY TRADING GMBH

NL Tech.Support: 0900-GIGABYTE (0900-44422983)

Address: Friedrich-Ebert-Damm 112 22047 Hamburg

BE Tech.Support: 0900-84034

TEL: +49-40-2533040 (Sales)

FAX: +31 40 290 2089

+49-1803-428468 (Tech.)

Tech. Support :

TEL: +49-40-25492343 (Sales)

http://nz.giga-byte.com/TechSupport/ServiceCenter.htm

+49-1803-428329 (Tech.)

Non-Tech. Support(Sales/Marketing) :

Tech. Support :

http://ggts.gigabyte.com.tw/nontech.asp

http://de.giga-byte.com/TechSupport/ServiceCenter.htm

WEB address : http://www.giga-byte.nl

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

WEB address : http://www.gigabyte.de

Appendix- 71 -

China

Australia

NINGBO G.B.T. TECH. TRADING CO., LTD.

GIGABYTE TECHNOLOGY PTY. LTD.

Tech. Support :

Address: 3/6 Garden Road, Clayton, VIC 3168 Australia

http://cn.giga-byte.com/TechSupport/ServiceCenter.htm

TEL: +61 3 85616288

English

Non-Tech. Support(Sales/Marketing) :

FAX: +61 3 85616222

http://ggts.gigabyte.com.tw/nontech.asp

Tech. Support :

WEB address : http://www.gigabyte.com.cn

http://www.giga-byte.com.au/TechSupport/ServiceCenter.htm

Shanghai

Non-Tech. Support(Sales/Marketing) :

TEL: +86-021-63410999

http://ggts.gigabyte.com.tw/nontech.asp

FAX: +86-021-63410100

WEB address : http://www.giga-byte.com.au

Beijing

France

TEL: +86-010-82886651

GIGABYTE TECHNOLOGY FRANCES S.A.R.L.

FAX: +86-010-82888013

Tech. Support :

Wuhan

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

TEL: +86-027-87851061

Non-Tech. Support(Sales/Marketing) :

FAX: +86-027-87851330

http://ggts.gigabyte.com.tw/nontech.asp

GuangZhou

WEB address : http://www.gigabyte.fr

TEL: +86-020-87586074

Russia

FAX: +86-020-85517843

Moscow Representative Office Of Giga-Byte Technology Co.,

Chengdu

Ltd.

TEL: +86-028-85236930

Tech. Support :

FAX: +86-028-85256822

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Xian

Non-Tech. Support(Sales/Marketing) :

TEL: +86-029-85531943

http://ggts.gigabyte.com.tw/nontech.asp

FAX: +86-029-85539821

WEB address : http://www.gigabyte.ru

Shenyang

Poland

TEL: +86-024-23960918

Representative Office Of Giga-Byte Technology Co., Ltd.

FAX: +86-024-23960918-809

POLAND

Tech. Support :

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

WEB address : http://www.gigabyte.pl

GA-8I865GVM(F)-775 Motherboard - 72 -