Gigabyte 8VT800-RZC: Frequency/Voltage Control

Frequency/Voltage Control

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

Frequency/Voltage Control

CPU Clock Ratio [15X]

Item Help

Auto Detect PCI/DIMM Clk [Enabled]

Menu Level}

English

Spread Spectrum [Enabled]

CPU Host Clock Control [Disabled]

ø CPU Clock 100MHz

DRAM Clock [By SPD]

AGP OverVoltage Control [Auto]

DIMM OverVoltage Control [Auto]

higf: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Save Default F7: Optimized Defaults

ø This item will be available when "CPU Host Clock Control" is set to Enabled.

CPU Clock Ratio

This option will not be shown or not be available if you are using a CPU with the locked ratio.

This setup option will automatically assign by CPU detection.

For C-Stepping P4: 8X,10X~24X default: 15X

For Northwood CPU: 12X~24X default: 16X

The option will display "Locked" and read only if the CPU ratio is not changeable.

Auto Detect PCI/DIMM Clk

Disabled Disable auto detect PCI/DIMM Clk.

Enabled Enable auto detect PCI/DIMM Clk. (Default value)

Spread Spectrum

Disabled Disable spread spectrum.

Enabled Enable spread spectrum. (Default value)

CPU Host Clock Control

Note: Please note that if your system is overclocked and cannot restart, please wait 20secs.

for automatic system restart or clear the CMOS setup data and perform a safe restart.

Disabled Disable CPU Host Clock Control. (Default value)

Enabled Enable CPU Host Clock Control.

CPU Clock

Incorrect using it may cause your system broken. For power End-User use only!

100~166 For 100MHz CPU:Set CPU Clock to 100MHz~166MHz.

133~199 For 133MHz CPU:Set CPU Clock to 133MHz~199MHz.

200~250 For 200MHz CPU:Set CPU Clock to 200MHz~250MHz.

- 32 -8VT800-RZ/8VT800-RZ-C Motherboard

English

DRAM Clock (MHz)

Please set DRAM Clock according to your requirement.

Incorrect using it may cause your system broken. For power End-User use only!

100-DDR200 If you use DDR200 DRAM module, please set "100-DDR200".

133-DDR266 If you use DDR266 DRAM module, please set "133-DDR266".

166-DDR333 If you use DDR333 DRAM module, please set "166-DDR333".

200-DDR400 If you use DDR400 DRAM module, please set "200-DDR400".

By SPD Set Memory frequency by DRAM SPD data. (Default value)

AGP OverVoltage Control

Increase AGP voltage may get stable for Over_Clock. But it may damage to AGP Card when

enable this feature.

Auto Supply voltage as AGP Card reguired. (Default value)

+0.1V Set AGP OverVoltage Control to +0.1V.

+0.2V Set AGP OverVoltage Control to +0.2V.

+0.3V Set AGP OverVoltage Control to +0.3V.

DIMM OverVoltage Control

Increase DRAM voltage may get stable for Over_Clock. But it may damage to DRAM module

when enable this feature.

Auto Supply voltage as DRAM module reguired. (Default value)

+0.1V Set DIMM OverVoltage Control to +0.1V.

+0.2V Set DIMM OverVoltage Control to +0.2V.

+0.3V Set DIMM OverVoltage Control to +0.3V.

- 33 - BIOS Setup