Blomberg KND 9950 X A+: 3 Installation

3 Installation

B Please remember that the

manufacturer shall not be held liable if

the information given in the instruction

manual is not observed.

Points to be considered

when re-transporting your

refrigerator

1. Your refrigerator must be

emptied and cleaned prior to any

transportation.

2. Shelves, accessories, crisper and etc.

in your refrigerator must be fastened

securely by adhesive tape against any

jolt before repackaging.

3. Packaging must be tied with thick

tapes and strong ropes and the

rules of transportation printed on the

3. Clean the interior of the refrigerator as

package must be followed.

recommended in the “Maintenance

Please do not forget…

and cleaning” section.

Every recycled material is an

4. Plug the refrigerator into the wall

indispensable source for the nature

outlet. When the fridge door is open

and for our national resources.

the fridge compartment interior light

If you wish to contribute to recycling

will come on.

the packaging materials, you can

5. You will hear a noise as the

get further information from the

compressor starts up. The liquid and

environmental bodies or local

gases sealed within the refrigeration

authorities.

system may also give rise to noise,

even if the compressor is not running

Before operating your

and this is quite normal.

refrigerator

6. Front edges of the refrigerator may

Before starting to use your refrigerator

feel warm. This is normal. These

check the following:

areas are designed to be warm to

1. Is the interior of the refrigerator dry

avoid condensation.

and can the air circulate freely in the

Electric connection

rear of it?

Connect your product to a grounded

2. You can install the 2 plastic wedges

socket which is being protected by a

as illustrated in the figure. Plastic

fuse with the appropriate capacity.

wedges will provide the required

Important:

distance between your refrigerator

• The connection must be in

and the wall in order to allow the air

compliance with national regulations.

circulation. (The illustrated figure is

• The power cable plug must be easily

only an example and does not match

accessible after installation.

exactly with your product.)

8

EN