Siemens TK 54 series: Starting the service programme

en

Starting the service programme

 8 lights up on the display.

●Switchtheappliancetostandbymode

●Turnthedial8 to O. The cleaning process

using the a button.

begins. Duration approx. 10 minutes.

●Holddownthecoffeedispensingbutton

Liquidowsintotray21 inside the

4 for at least 3 seconds.

appliance, then from the coffee outlet.

 D lights up on the display.

●Emptyandreinsertthetrays20 and 21.

 D lights up on the display.

●Empty,cleanandreinsertthetrays20

 7 lights up on the display.

and 21.

●Openthecoveroftheduct14 for ground

The appliance heats up and is ready for use

coffee / cleaning tablets.

again when all four buttons 4, 5, a and h

●Placeone cleaning tablet in the duct 14

light up and remain lit.

and close the cover.

Important: If the service programme is

 9 lights up on the display and the 4

interrupted, e.g. owing to a loss in power,

buttonashes.

it is vital that the water tank be emptied,

●Fillthewatertankwithlukewarmwater,

rinsedandlledwithfreshwaterbefore

add descaling agent and dissolve

the appliance is used again. Then turn the

completely (total liquid: 0.5 litres).

appliance on.

or

●Theappliancerinses,liquidowsinto

●Pourprepareddescalingmixtureintothe

tray 21.

water tank (total liquid: 0.5 litres).

●Pressthe4 button. The descaling

 8ashesonthedisplay.

process begins. Duration approx. 10

●Holdacupunderthenozzle9 and turn

minutes.Thedescalingsolutionowsinto

the knob 8 to g/h.

the water tray 21.

Water runs into the cup.

 8ashesonthedisplay.

 8 lights up on the display.

●Placeasuitablecontainer(approx.0.5

●Turntheknob8 back to O.

litres) under the nozzle 9.

The appliance rinses and is ready for use

●Setthedial8 to g/h. The descaling

again.

process begins. Duration approx. 5

minutes.Thedescalingsolutionowsinto

the container.

 D lights up on the display.

●Emptyandreinsertthewatertray21.

 9 lights up on the display and the 4

buttonashes.

●Emptyandcleanthewatertank12,ll

with fresh water up to the “max“ mark and

reinsert.

●Placeasuitablecontainer(approx.0.5

litres) under the nozzle 9.

●Pressthe4 button. The cleaning process

begins.Waterowsintothecontainer.

17