Siemens MS 65598: Safety Information Slicing Operating the appliance Cleaning

en

Safety Information

Switching the appliance ON/OFF

/K Risk of injury

/f\ Risk of injury from the sharp biade

Connect and operate the appliance only in

When the appliance has been switched OFF,

accordance with the specifications on the rating

the blade continues rotating briefly.

plate.

Never place hands near the blade.

Do not use if the cord or appliance is damaged.

Warning! Motor may overheat.

Keep children away from the appliance.

After a maximum 10 minutes of continuous

Supervise children to prevent them from playing

use, switch OFF the appliance and allow to

with the appliance.

cool down.

Do not allow persons (also children) with

Quick-action operation: Fig. B

restricted physical sensory perception or mental

• Press switch-on safety device (1.), then

abilities or with lack of experience and know

• press ON button until the power tool starts

ledge to operate the appliance unless they are

running (2.). Switch-on safety device can

supervised or have been instructed in the use of

now be released (3.).

the appliance by somebody who is responsible

for their safety.

• To stop the appliance, release the

After using the appliance, if leaving the appliance

ON switch.

unattended or if the appliance malfunctions,

Continuous operation Fig. C

ALWAYS pull out the plug. Do not place the

• Press switch-on safety device (1.), then

power cord over sharp edges or hot surfaces.

• Press ON button (2.).

To prevent injury, a damaged power cord must

Release both buttons (3.).

be replaced by the manufacturer or his

• To stop the appliance, press the ON switch

customer service or a similarly qualified person.

again and release.

Only our customer service may repair the

Slicing

appliance.

Make out-of-service appliances unusable.

Fig. A

Blade is very sharp. After switching off, the drive

• Gently press the food which is to be sliced

continues for a short time. After work, set cutting

against the stop plate and slowly slide

width to 0.

against the moving blade.

Do not operate the appliance without the

carriage and “sausage end” holder.

After using the appliance

Do not immerse power tool in water or clean

• Set the slicing width to 0.

under running water.

• Slide the carriage towards the blade into

the end position and lock with the slide (6)

Operating the appliance

in Pos. 1.

Before using the appliance for the first time,

After slicing greasy food (e.g. meat, sausage,

clean thoroughly.

cheese):

Preparation

• The appliance and especially the blade

should be cleaned immediately;

Fig. A

see “Cleaning” chapter.

• Place the appliance on a smooth,

clean surface.

Cleaning

• Stow the cord in the cord store (9).

/f\ Risk of injury from the sharp biade

- Remove cable from the two clamping

Before cleaning the appliance, pull out the

slots (1.).

mains plug and remove the blade.

- Pull out/push in cable past the cover

Do NOT grip the blade by the cutting surface,

to the required length (O.).

but by the blade attachment.

- Re-attach cable end (3.).

/f\ Eiectric shock risk

• Insert the plug.

NEVER immerse the appliance in water

• Attach the carriage (5) and “sausage end”

or place under running water.

holder (8).

• Set required cutting width (1).

5