Nikon AF-S NIKKOR 200-400mm f/4G ED VR II 2187: ■ Lens care ■ Standard accessories ■ Optional accessories
■ Lens care ■ Standard accessories ■ Optional accessories: Nikon AF-S NIKKOR 200-400mm f/4G ED VR II 2187
Table of contents
- Notes on Safety Operations
- Observe the following precautions when handling the camera and lens
- ■ Nomenclature
- En
- ■ Major features ■ Usable cameras and available functions
- ■ Focusing
- ■ Focus operation selection switch and focus operation button (See p. 20 for compatible cameras.)
- ■ Vibration reduction mode (VR
- Setting the vibration reduction ON/OFF switch Setting the vibration reduction mode switch Notes on using vibration reduction
- ■ Setting the aperture ■ Focusing, zooming, and depth of field ■ Using a built-in rotating tripod collar ■ Using the lens hood
- ■ Lens protective glass ■ The built-in flash and vignetting ■ Slip-in filter holder
- ■ Recommended focusing screens
- ■ Lens care ■ Standard accessories ■ Optional accessories
- ■ Specifications
■ Lens care
•
Be careful not to hold the camera body when the lens is attached, as this may
Jp
cause damage to the camera (lens mount). Be sure to hold both the lens and
camera when carrying.
• When the lens is mounted on a camera, do not pick up or hold the camera
En
and lens by the lens hood.
•
Be careful not to allow the CPU contacts to become dirty or damaged.
De
• If the lens mount rubber gasket is damaged, be sure to visit the nearest Nikon-
authorized service representative for repair.
•
Clean lens surfaces with a blower brush. To remove dirt and smudges, use a soft,
Fr
clean cotton cloth or lens tissue moistened with ethanol (alcohol) or lens cleaner.
Wipe in a circular motion from the center to outer edge, taking care not to leave
Es
traces or touch other parts of the lens.
• Never use organic solvent such as thinner or benzene to clean the lens.
Se
• When storing the lens in its case, attach both the front and rear lens caps.
• When the lens will not be used for an extended period of time, store it in a
cool, dry place to prevent mold and rust. Be sure to store the lens away from
Ru
direct sunlight or chemicals such as camphor or naphthalene.
• Do not get water on the lens or drop it in water as this will cause it to rust and
Nl
malfunction.
• Reinforced plastic is used for certain parts of the lens. To avoid damage, never
It
leave the lens in an excessively hot place.
■ Standard accessories
Ck
• Slip-on front lens cap
• Rear Lens Cap
• Lens Hood HK-30
Ch
• Semi-soft Case CL-L2 (with dedicated interior cushioning material)
• Dedicated slip-in filter holder
Kr
• 52mm Screw-on NC Filter
• Dedicated lens protective glass (attached to the lens)
• Dedicated lens protective glass case
• Strap LN-1
Important
• The slip-in filter holder, with a 52mm screw-on filter attached, should be
inserted in the lens at all times.
■ Optional accessories
• 52mm screw-on filters (except circular polarizing filterⅡ)
• Slip-in Circular Polarizing Filter C-PL1L
• AF-S Teleconverters TC-14EⅡ/TC-17EⅡ*/ TC-20EⅢ*
(*Autofocus is not possible.)
28
