Rowenta INTENSIUM RO6679: 3 • Storing and transporting

GB

surfaces…

(fig.6)

.

Carry your vacuum cleaner easily thanks to

3 • Storing and transporting

its carry handle (10). Do not carry your

the appliance

vacuum cleaner by the dust compartment

After use, stop your vacuum cleaner by

handle

(fig.9).

pressing the On / Off pedal and unplug it

When you store your vacuum cleaner, place

(fig.7). Rewind the power cord by pressing

the tube in his housing at the rear of your

the cord winder pedal (fig.8).

appliance (fig.10).

CLEANING AND MAINTENANCE

The air we breathe contains particles that may be

2 • Clean the dust

allergens: mite larvae and droppings, mould,

compartment joints

pollen, smoke and animal residues (hair, skin,

Remove the dust compartment (fig.11).

saliva, urine). The smallest particles penetrate

Clean the dust compartment joints with a

deep into the respiratory system where they can

cloth (fig.14).

cause inflammation and cause lung impairment.

Replace the dust compartment (fig.15).

HEPA filters (High Efficiency Particulate Air) are

used to filter out the smallest particles.

3 • Clean the black foam filter (19)

With the HEPA filter, the air released back into the

room is healthier than the air that is vacuumed.

IMPORTANT Every 6 months or when

the suction is no longer satisfactory,

IMPORTANT Always stop and unplug

wash the black foam filter.

your vacuum cleaner before maintenance

or cleaning. Regularly check and clean all of

Press the lid opening button (fig.16). Tilt the

your vacuum cleaner and the various filters.

lid back cover (fig.17).

Remove the black foam filter (fig.18) then

wash and wring it (fig.19). Leave it to dry

ATTENTION Never operate the

for at least 12 hours before putting it back.

vacuum cleaner without the filtration

system (foam, microfilter and filter).

ATTENTION

Leave the black foam

filter to dry and make sure it is thoroughly

1 • Empty the dust

dry before putting it back in the appliance.

compartment (5)

Empty the dust box after each use as follows:

Replace the black foam filter and close the lid.

Take the dust compartment by the handle

and pull it (fig.11).

4 • Clean the microfilter (20)

Press the dust compartment opening button

(fig.12) and then empty it (fig.13).

IMPORTANT Every 3 months, wash

Clean the edges of the dust compartment

the microfilter.

with a cloth (fig.14).

Put the dust compartment back in place

Press the button to open the lid (fig.16). Tilt

(fig.15).

the lid back (fig.17).

Remove the black foam filter (fig.18) and

ATTENTION Never exceed the

then remove the microfilter (fig.20).

maximum level given on the dust

Wash the microfilter (fig.21). Leave it to dry

compartment.

for at least 12 hours before putting it back.

9