MB QUART PAB 2100c: English

13

En gl is h

MBQR-1

Basic application

Interconnect cable checklist:

- Connect the line inputs to a Radio/CD RCA outputs or line output 

of the full range primary amplifi er with good quality RCA cables. A 

“Y” adapter may be needed as shown in the diagram.

- Use at least 16 gauge speaker wiring. These amplifi ers have dual 

speaker terminals, simplifying the hookup of multiple speakers

Crossover frequency control checklist:

- LOW PASS: 35Hz to 250Hz

- SUBSONIC: 10 Hz to 50 Hz

- BASS EQ: 0 to 9 dB

- PHASE: 0 to 180 degrees

Level control checklist:

Refer to the section “Setting up systems after installation for best 

performance”

Minimum fi nal loudspeaker impedance: 

1 ohm

*Note: You can use the Radio/CD designated mono line output or a full range stereo line output. 

For full range stereo line output, you will need an optional “Y-Adaptor” as shown

AMPLIFIER APPLICATIONS PAB 1200.1 D Mono Amplifi er