Gigabyte GA-8ILFT: Chapter 5 Appendix

Chapter 5 Appendix: Gigabyte GA-8ILFT

Revision History

Chapter 5 Appendix

Picture below are shown in Windows XP (IUCD driver version 2.0)

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

English

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

A. Installing Intel 845GL Chipset Driver

Please install this driver as the first

priority. this item installs the chipset

driver utility that enableds Plug-n-Plag

INF support for Intel chipset

component.

B. Installing Sound Driver

Click this item to install sound driver.

C. Installing LAN Driver

Click this item to install LAN driver.

Appendix A: Intel 845GL Chipset Driver Installation

Follow the setup that showing on the scween to install the Utility.

Inorder to install the driver successfully, please refer to the following installation procedures.

j

k

l

m

* For GA-8ILFT Only.

- 52 -GA-8ILFT Series Motherboard

English

A-1. Intel Chipset Software Installation Utility

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

1.Click "Intel Chipset Software

Installation Utility" item.

(1)

2.Click "Next".

(2)

3.Click "Yes".

4.Click "Next".

(3)

(4)

- 53 -

Appendix

English

5.Click "Finish" to restart computer.

(5)

(6)

- 54 -GA-8ILFT Series Motherboard

English

A-2. Intel Application Accelerator

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

1.Click "Intel Application Accelerator" item.

(1)

(2)

3.Click "Yes".

2.Click "Next".

(3)

(4)

4.Click "Next".

5.Click "Next".

(5)

(6)

- 55 -

Appendix

English

6.Click "Finish" to restart computer.

(7)

(8)

- 56 -GA-8ILFT Series Motherboard

English

A-3. Intel 845G Chipset VGA Graphics Driver

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

1.Click "Intel 845G Chipset VGA

Graphics Driver" item.

(1)

2.Click "Next".

(2)

3.Click "Yes".

(3)

(4)

- 57 -

Appendix

English

4.Click "Finish" to restart computer.

(5)

A-4. USB Patch Driver

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

1.Click "USB Patch Driver" item.

(1)

2.Click "Finish" to restart computer.

(2)

- 58 -GA-8ILFT Series Motherboard

English

Appendix B: RealTek AC97 Audio Driver

Revision History

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

Revision History

2.Click "Next".

1.Click "RealTek AC97 Audio Driver"

item.

(1)

(2)

3.Click "Finish" to restart computer.

(3)

(4)

- 59 -

Appendix

Appendix C: RealTek 8139/8130/8100 Network Driver *

Ø For your reference, you can use the following steps to complete the RealTek

English

8139/8130/8100 Network Driver Installation.

1.Click "RealTek Network Driver"

item.

(1)

(2)

2.Click "Finish" to restart computer.

(3)

(4)

* For GA-8ILFT Only.

- 60 -GA-8ILFT Series Motherboard

English

Appendix D: EasyTune 4 Utilities Installation

Revision History

Insert the driver CD-title that came with your motherboard into your CD-ROM driver, the driver

CD-title will auto start and show the installation guide. If not, please double click the CD-ROM device

icon in "My computer", and execute the setup.exe.

Press "Tools" icon.

2.Click "Easy Tune 4".

1.Click "Gigabyte Utilities".

(1)

(2)

3.Click "Next".

4.Click "Next".

(3)

(4)

5.Click "Finish" to restart computer.

(5)

(6)

- 61 -

Appendix

Appendix E: BIOS Flash Procedure

BIOS update procedure:

Method 1:

TM

If your OS is Win9X, we recommend that you used Gigabyte @BIOS

Program to flash BIOS.

English

2.Click "@BIOS Writer Utility

Press "Tools" icon.

v.1.08q".

1.Click "Gigabyte Utilities".

(1)

(2)

Click "P".

Click here.

(3)

Methods and steps:

I. Update BIOS through Internet

a. Click "Internet Update" icon

b. Click "Update New BIOS" icon

TM

c. Select @BIOS

sever ("Gigabyte @BIOSTM sever 1 in Taiwan" and "Gigabyte

TM

@BIOS

sever 2 in Taiwan" are available for now, the others will be completedsoon)

d. Select the exact model name on your motherboard

e. System will automatically download and update the BIOS.

- 62 -GA-8ILFT Series Motherboard

English

II. Update BIOS NOT through Internet:

a. Do not click "Internet Update" icon

b. Click "Update New BIOS"

c. Please select "All Files" in dialog box while opening the old file.

d. Please search for BIOS unzip file, downloading from internet or any other methods (such as:

8ILFT.F1).

e. Complete update process following the instruction.

III. Save BIOS

In the very beginning, there is "Save Current BIOS" icon shown in dialog box. It means to save

the current BIOS version.

IV. Check out supported motherboard and Flash ROM:

In the very beginning, there is "About this program" icon shown in dialog box. It can help you

check out which kind of motherboard and which brand of Flash ROM are supported.

Note:

a. In method I, if it shows two or more motherboard's model names to be selected, please make

sure your motherboard's model name again. Selecting wrong model name will cause the

system unbooted.

b. In method II, be sure that motherboard's model name in BIOS unzip file are the same as your

motherboard's. Otherwise, your system won't boot.

TM

c. In method I, if the BIOS file you need cannot be found in @BIOS

server, please go onto

Gigabyte's web site for downloading and updating it according to method II.

d. Please note that any interruption during updating will cause system unbooted

- 63 -

Appendix

Method 2:

We use GA-7VTX motherboard and Flash841 BIOS flash utility as example.

Please flash the BIOS according to the following procedures if you are now under the DOS mode.

Flash BIOS Procedure:

English

STEP 1:

(1) Please make sure your system has installed the extraction utility such as winzip or pkunzip.

Firstly you have to install the extraction utility such as winzip or pkunzip for unzip the files. Both of

these utilities are available on many shareware download pages like http://www.shareware.cnet.

com

STEP 2: Make a DOS boot diskette. (See example: Windows 98 O.S.)

Beware: Windows ME/2000 are not allowed to make a DOS boot diskette.

(1) With an available floppy disk in the floppy drive. Please leave the diskette "UN-write protected"

type. Double click the "My Computer" icon from Desktop, then click "3.5 diskette (A)" and right

click to select "Format (M)"

- 64 -GA-8ILFT Series Motherboard

English

(2) Select the "Quick (erase)" for Format Type, and pick both "Display summary when finished" and

"Copy system files", after that press "Start". That will format the floppy and transfer the needed

system files to it.

Beware: This procedure will erase all the prior data on that floppy, so please proceed accordingly.

(3) After the floppy has been formatted completely, please press "Close".

- 65 -

Appendix

STEP 3: Download BIOS and BIOS utility program.

(1) Please go to Gigabyte website http://www.gigabyte.com.tw/index.html, and click "Support".

English

(2) From Support zone, click the "Motherboards BIOS & Drivers".

- 66 -GA-8ILFT Series Motherboard

English

(3) We use GA-7VTX motherboard as example. Please select GA-7VTX by Model or Chipset

optional menu to obtain BIOS flash files.

(4) Select an appropriate BIOS version (For example: F4), and click to download the file. It will pop

up a file download screen, then select the "Open this file from its current location" and press "OK".

- 67 -

Appendix

(5) At this time the screen shows the following picture, please click "Extract" button to unzip the files.

English

(6) Please extract the download files into the clean bootable floppy disk A mentioned in STEP 2, and

press "Extract".

- 68 -GA-8ILFT Series Motherboard

English

STEP 4: Make sure the system will boot from the floppy disk.

(1) Insert the floppy disk (contains bootable program and unzip file) into the floppy drive A. Then,

restart the system. The system will boot from the floppy disk. Please press <DEL> key to enter

BIOS setup main menu when system is boot up.

American Release:09/16/99

Megatrends AMIBIOS (C) 1999 American Megatrend

7VTX F1

Check System Health OK

AMD-Athlon(tm)Processor-900MHz

Checking NVRAM...

262144KB

Wait...

Press F1 to enter Dual BIOS Utility. Press ESC to quit

Press any key to contiune

( C ) American Megatrends Inc.,

63-0001-001199-00101111-071595-VIA_K7-GA7VTX1-F

(2) Once you enter the BIOS setup utility, the main menu will appear on the screen. Use the arrows

to highlight the item "BIOS FEATURES SETUP".

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

(C) 1999 American Megatrends, Inc. All Rights Reserved

STANDARD CMOS SETUP INTEGRATED PERIPHERALS

BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP

CHIPSET FEATURES SETUP SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP USER PASSWORD

PNP / PCI CONFIGURATION IDE HDD AUTO DETECTION

LOAD BIOS DEFAULTS SAVE & EXIT SETUP

LOAD SETUP DEFAULTS EXIT WITHOUT SAVING

ESC: Quit hifg : Select Item (Shift)F2 : Change Color F5: Old Values

F6: Load BIOS Defaults F7: Load Setup Defaults F10:Save & Exit

Time, Date , Hard Disk Type

- 69 -

Appendix

(3) Press "Enter" to enter "BIOS FEATURES SETUP" menu. Use the arrows to highlight the item

"1st Boot Device", and then use the "Page Up" or "Page Down" keys to select "Floppy".

AMIBIOS SETUP - BIOS FEATURES SETUP

English

( C ) 2001 American Megatrends, Inc. All Rights Reserved

1st Boot Device : Floppy

2nd Boot Device : IDE-0

3rd Boot Device : CDROM

S.M.A.R.T. for Hard Disks : Disabled

BootUp Num-Lock : On ESC: Quit hifg: Select Item

Floppy Drive Seek : Disabled F1 : Help PU/PD/+/- : Modify

Password Check : Setup F5 : Old Values (Shift)F2: Color

F6 : Load BIOS Defaults

F7 : Load Setup Defaults

(4) Press "ESC" to go back to previous screen. Use the arrows to highlight the item "SAVE & EXIT

SETUP" then press "Enter". System will ask "SAVE to CMOS and EXIT (Y/N)?" Press "Y"

and "Enter" keys to confirm. Now the system will reboot automatically, the new BIOS setting

will be taken effect next boot-up.

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

(C) 2001 American Megatrends, Inc. All Rights Reserved

STANDARD CMOS SETUP INTEGRATED PERIPHERALS

BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP

CHIPSET FEATURES SETUP SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP USER PASSWORD

PNP / PCI CONFIGURATION IDE HDD AUTO DETECTION

Save to CMOS and EXIT (Y/N)? Y

LOAD BIOS DEFAULTS SAVE & EXIT SETUP

LOAD SETUP DEFAULTS EXIT WITHOUT SAVING

ESC: Quit hifg : Select Item (Shift)F2 : Change Color F5: Old Values

F6: Load BIOS Defaults F7: Load Setup Defaults F10:Save & Exit

Save Data to CMOS & Exit SETUP

- 70 -GA-8ILFT Series Motherboard

English

STEP 5: BIOS flashing.

(1) After the system boot from floppy disk, type "A:\> dir/w" and press "Enter" to check the entire

files in floppy A. Then type the "BIOS flash utility" and "BIOS file" after A:\>. In this case you

have to type "A:\> Flash841 7VTX.F4" and then press "Enter".

Starting Windows 98

Microsoft(R) Windows98

© Copyright Microsoft Corp 1981-1999

A:\> dir/w

Volume in drive A has no label

Volume Serial Number is 16EB-353D

Directory of A:\

COMMAND.COM 7VTX.F4 FLASH841.EXE

3 file(s) 838,954 bytes

0 dir(s) 324,608 bytes free

A:\> Flash841 7VTX.F4

(2) Now screen appears the following Flash Utility main menu. Press "Enter", the highlighted item

will locate on the model name of the right-upper screen. Right after that, press "Enter" to start

BIOS Flash Utility.

- 71 -

Appendix

(3) It will pop up a screen and asks "Are you sure to flash the BIOS?" Press [Enter] to continue the

procedure, or press [ESC] to quit.

English

Beware: Please do not turn off the system while you are upgrading BIOS. It will render your

BIOS corrupted and system totally inoperative.

Are you sure to flash the BIOS?

[Enter] to continue Or [Esc] to cancel?

(4) The BIOS flash completed. Please press [ESC] to exit Flash Utility.

EXIT?

[Enter] to continue Or [Esc] to cancel?

- 72 -GA-8ILFT Series Motherboard

English

STEP 6: Load BIOS defaults.

Normally the system redetects all devices after BIOS has been upgraded. Therefore, we highly

recommend reloading the BIOS defaults after BIOS has been upgraded. This important step

resets everything after the flash.

(1) Take out the floppy diskette from floppy drive, and then restart the system. The boot up screen will

indicate your motherboard model and current BIOS version.

American Release:09/16/99

Megatrends AMIBIOS (C) 1999 American Megatrend

7VTX F4

Check System Health OK

AMD-Athlon(tm)Processor-900MHz

Checking NVRAM...

262144KB

Wait...

Press F1 to enter Dual BIOS Utility. Press ESC to quit

Press any key to contiune

( C ) American Megatrends Inc.,

63-0001-001199-00101111-071595-VIA_K7-GA7VTX1-F

(2) Don't forget to press <DEL> key to enter BIOS setup again when system is boot up. Use the

arrows to highlight the item "LOAD SETUP DEFAULTS" then press "Enter". System will ask

"Load Setup Defaults (Y/N)?" Press "Y" and "Enter" keys to confirm.

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

(C) 2001 American Megatrends, Inc. All Rights Reserved

STANDARD CMOS SETUP INTEGRATED PERIPHERALS

BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP

CHIPSET FEATURES SETUP SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP USER PASSWORD

PNP / PCI CONFIGURATION IDE HDD AUTO DETECTION

Load Setup Defaults? (Y/N)?N

LOAD BIOS DEFAULTS SAVE & EXIT SETUP

LOAD SETUP DEFAULTS EXIT WITHOUT SAVING

ESC: Quit hifg : Select Item (Shift)F2 : Change Color F5: Old Values

F6: Load BIOS Defaults F7: Load Setup Defaults F10:Save & Exit

Load Setup Defaults

- 73 -

Appendix

(3) Use the arrows to highlight the item "SAVE & EXIT SETUP" and press "Enter". System will

ask "SAVE to CMOS and EXIT (Y/N)?" Press "Y" and "Enter" keys to confirm. Now the

English

system will reboot automatically, the new BIOS setting will be taken effect next boot-up.

AMIBIOS SIMPLE SETUP UTILITY - VERSION 1.24b

(C) 2001 American Megatrends, Inc. All Rights Reserved

STANDARD CMOS SETUP INTEGRATED PERIPHERALS

BIOS FEATURES SETUP HARDWARE MONITOR & MISC SETUP

CHIPSET FEATURES SETUP SUPERVISOR PASSWORD

POWER MANAGEMENT SETUP USER PASSWORD

PNP / PCI CONFIGURATION IDE HDD AUTO DETECTION

Save to CMOS and EXIT (Y/N)? Y

LOAD BIOS DEFAULTS SAVE & EXIT SETUP

LOAD SETUP DEFAULTS EXIT WITHOUT SAVING

ESC: Quit hifg : Select Item (Shift)F2 : Change Color F5: Old Values

F6: Load BIOS Defaults F7: Load Setup Defaults F10:Save & Exit

Save Data to CMOS & Exit SETUP

(4) Congratulate you have accomplished the BIOS flash procedure.

- 74 -GA-8ILFT Series Motherboard

English

Appendix E: Acronyms

Acronyms Meaning

ACPI Advanced Configuration and Power Interface

APM Advanced Power Management

AGP Accelerated Graphics Port

AMR Audio Modem Riser

ACR Advanced Communications Riser

BIOS Basic Input / Output System

CPU Central Processing Unit

CMOS Complementary Metal Oxide Semiconductor

CRIMM Continuity RIMM

CNR Communication and Networking Riser

DMA Direct Memory Access

DMI Desktop Management Interface

DIMM Dual Inline Memory Module

DRM Dual Retention Mechanism

DRAM Dynamic Random Access Memory

DDR Double Data Rate

ECP Extended Capabilities Port

ESCD Extended System Configuration Data

ECC Error Checking and Correcting

EMC Electromagnetic Compatibility

EPP Enhanced Parallel Port

ESD Electrostatic Discharge

FDD Floppy Disk Device

FSB Front Side Bus

HDD Hard Disk Device

IDE Integrated Dual Channel Enhanced

IRQ Interrupt Request

I/O Input / Output

IOAPIC Input Output Advanced Programmable Input Controller

ISA Industry Standard Architecture

LAN Local Area Network

to be continued......

- 75 -

Appendix

Acronyms Meaning

LBA Logical Block Addressing

LED Light Emitting Diode

MHz Megahertz

English

MIDI Musical Interface Digital Interface

MTH Memory Translator Hub

MPT Memory Protocol Translator

NIC Network Interface Card

OS Operating System

OEM Original Equipment Manufacturer

PAC PCI A.G.P. Controller

POST Power-On Self Test

PCI Peripheral Component Interconnect

RIMM Rambus in-line Memory Module

SCI Special Circumstance Instructions

SECC Single Edge Contact Cartridge

SRAM Static Random Access Memory

SMP Symmetric Multi-Processing

SMI System Management Interrupt

USB Universal Serial Bus

VID Voltage ID

- 76 -GA-8ILFT Series Motherboard

&

English

Technical Support/RMA Sheet

Customer/Country: Company: Phone No.:

Contact Person: E-mail Add. :

Model name/Lot Number: PCB revision:

BIOS version: O.S./A.S.:

Hardware Mfs. Model name Size: Driver/Utility:

Configuration

CPU

Memory

Brand

Video Card

Audio Card

HDD

CD-ROM /

DVD-ROM

Modem

Network

AMR / CNR

Keyboard

Mouse

Power supply

Other Device

Problem Description:

&

- 77 -

Appendix