Gigabyte GA-8I865PE775-G-RH: Chapter 4 Appendix

English

Chapter 4 Appendix

4-1 Unique Software Utilities

(Not all model support these Unique Software Utilities, please check your MB features.)

4-1-1 EasyTune 5 Introduction

EasyTune 5 presents the most convenient Windows based system performance enhancement and

manageability utility. Featuring several powerful yet easy to use tools such as 1) Overclocking for enhancing

system performance, 2) C.I.A. and M.I.B. for special enhancement for CPU and Memory, 3) Smart-Fan

control for managing fan speed control of both CPU cooling fan and North-Bridge Chipset cooling fan, 4) PC

(Note)

health for monitoring system status.

User Interface Overview

Button / Display Description

1. Overclocking Enters the Overclocking setting page

2. C.I.A./C.I.A.2 and M.I.B./M.I.B.2 Enters the C.I.A./2 and M.I.B./2 setting page

3. Smart-Fan Enters the Smart-Fan setting page

4. PC Health Enters the PC Health setting page

5. GO Confirmation and Execution button

6. "Easy Mode" & "Advance Mode" Toggles between Easy and Advance Mode

7. Display screen Display panel of CPU frequency

8. Function display LEDs Shows the current functions status

9. GIGABYTE Logo Log on to GIGABYTE website

TM

10. Help button Display EasyTune

5 Help file

TM

11. Exit or Minimize button Quit or Minimize EasyTune

5 software

(Note) EasyTune 5 functions may vary depending on different motherboards.

Appendix- 51 -

4-1-2 Xpress Recovery2 Introduction

Xpress Recovery2 is designed to provide quick backup and restora-

tion of hard disk data. Supporting Microsoft operating systems including

English

Windows XP/2000/NT/98/Me and DOS, and file systems including

FAT16, FAT32, and NTFS, Xpress Recovery2 is able to back up data

on hard disks on PATA and SATA IDE controllers. After Xpress Recovery2 is executed from CD-ROM

for the first time, it will stay permanent in your hard disk. If you wish to run Xpress Recovery2 later, you

can simply press F9 during system bootup to enter Xpress Recovery2 without the CD-ROM.

System requirements:

1. Intel x86 platforms

2. At least 64M bytes of system memory

3. VESA-supported VGA cards

How to use the Xpress Recovery2

Initial access by booting from CD-ROM and subsequent access by pressing the F9 key:

Steps: After entering BIOS Setup, go to Advanced BIOS Feature and set to boot from CD-ROM. Save

the settings and exit the BIOS Setup. Insert the provided driver CD into your CD-ROM drive. Upon

system restart, the message which says "Boot from CD/DVD:" will appear in the bottom left corner

of the screen. Press any key to enter Xpress Recovery2.

After the steps above are completed, subsequent access to Xpress Recovery2 can be made

by simply pressing the <F9> key during system power-on.

.

.

Boot from CD/DVD:

Boot from CD/DVD:

Press any key to startup XpressRecovery2.....

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2006, Award Software, Inc.

Intel 865G AGPSet BIOS for 8I865PE775-G-RH E1

.

.

.

.

<DEL>:BIOS Setup/Q-Flash, <F9>: Xpress Recovery2, <F12> Boot Menu

<F9> Xpress Recovery2

06/27/2006-i865G-6A79ZG0WC-00

1. If you have already entered Xpress Recovery2 by booting from the CD-ROM, you can

enter Xpress Recovery2 by pressing the <F9> key in the future.

2. System storage capacity and the reading/writing speed of the hard disk will affect

the data backup speed.

3. It is recommended that Xpress Recovery2 be immediately installed once you com-

plete installations of OS and all required drivers as well as software.

GA-8I865PE775-G-RH Motherboard - 52 -

English

The Main Screen of Xpress Recovery2

1. RESTORE:

Restore the backed-up data to your hard disk.

(This button will not appear if there is no backup

file.)

2. BACKUP:

Back up data from hard disk.

3. REMOVE:

Remove previously-created backup files

to release disk space.

(This button will not appear if there is no backup

file.)

4. REBOOT:

Exit the main screen and restart the system.

Limitations:

1. Not compatible to Xpress Recovery.

2. For the use of Xpress Recovery2, a primary partition must be reserved.

3. Xpress Recovery2 will store the backup file at the end of the hard disk, so free space available

on the hard disk for the backup file must be allocated in advance. (A minimum 4GB is recom-

mended but the actual space is dependent on the size of the data to be backed up)

4. Capable of backing up hard disks installed with Windows operating systems including DOS and

Windows XP/2000/NT/9x/Me.

5. USB hard disks are currently not supported.

6. Does not support RAID/AHCI (class code 0104/0106) hard disks.

7. Capable of backing up and restoring only the first physical hard disk.

Hard disks detection sequence is as follows:

a. PATA IDE primary channel

b. PATA IDE secondary channel

c. SATA IDE channel 1

d. SATA IDE channel 2

e. SATA IDE channel 3

f. SATA IDE channel 4

Precautions:

1. When using hard disks with more than 128G under Windows 2000, be sure to execute the

EnableBigLba.exe program from the driver CD before data backup.

2. It is normal that data backup takes longer time than data restoration.

3. Xpress Recovery2 is compliant with the GPL regulations.

4. On a few motherboards based on Nvidia chipsets, BIOS update is required for Xpress Recovery2

to correctly identify RAID and SATA IDE mode. Please contact your motherboard manufacturer.

Appendix- 53 -

4-1-3 Flash BIOS Method Introduction

TM

Method 1 : Q-Flash

Utility

TM

Q-Flash

is a BIOS flash utility embedded in Flash ROM. With this utility,

English

users only have to stay in the BIOS menu when they want to update

TM

BIOS. Q-Flash

allows users to flash BIOS without any utility in

TM

DOS or Windows. Using Q-Flash

indicating no more fooling around with any complicated instructions

and operating system since it is in the BIOS menu.

Please note that because updating BIOS has potential risk, please do it with caution!! We are

sorry that Gigabyte Technology Co., Ltd is not responsible for damages of system because of

incorrect manipulation of updating BIOS to avoid any claims from end-users.

Before You Begin:

TM

Before you start updating BIOS with the Q-Flash

utility, please follow the steps below first.

1. Download the latest BIOS for your motherboard from Gigabyte's website.

2. Extract the BIOS file downloaded and save the BIOS file (the one with model name.Fxx. For

example, 8KNXPU.Fba) to a floppy disk.

3. Reboot your PC and press Del to enter BIOS menu.

The BIOS upgrading guides below are separated into two parts.

If your motherboard has dual-BIOS, please refer to Part One.

If your motherboard has single-BIOS, please refer to Part Two.

Part One:

TM

Updating BIOS with Q-Flash

Utility on Dual BIOS Motherboards.

Some of Gigabyte motherboards are equipped with dual BIOS. In the BIOS menu of the motherboards

supporting Q-Flash and Dual BIOS, the Q-Flash utility and Dual BIOS utility are combined in the same

screen. This section only deals with how to use Q-Flash utility.

In the following sections, we take GA-8KNXP Ultra as the example to guide you how to flash BIOS

from an older version to the latest version. For example, from Fa3 to Fba.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel i875P AGPset BIOS for 8KNXP Ultra Fa3

The BIOS file is Fa3

Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

before updating

<CPUID : 0F27 Patch ID : 0027>

Memory Testing : 131072K OK

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For

Xpress Recovery

08/07/2003-i875P-6A79BG03C-00

GA-8I865PE775-G-RH Motherboard - 54 -

TM

English

Entering the Q-Flash

utility:

Step1: To use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 Standard CMOS Features

Select Language

 Advanced BIOS Features

Load Fail-Safe Defaults

 Integrated Peripherals

Load Optimized Defaults

 Power Management Setup

Set Supervisor Password

 PnP/PCI Configurations

Set User Password

 PC Health Status

Save & Exit Setup

 MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Step 2: Press F8 button on your keyboard and then Y button to enter the Dual BIOS/Q-Flash utility.

TM

Exploring the Q-Flash

/ Dual BIOS utility screen

The Q-Flash / Dual BIOS utility screen consists of the following key components.

Dual BIOS Utility

Dual BIOS utility bar

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Task menu for

Wide Range Protection Disable

Dual BIOS

Boot From Main Bios

Auto Recovery Enable

utility

Halt On Error Disable

Copy Main ROM Data to Backup

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

TM

Q-Flash

utility title

Load Main BIOS from Floppy

Task menu for

bar

Load Backup BIOS from Floppy

TM

Save Main BIOS to Floppy

Q-Flash

utility

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

Action bar

Task menu for Dual BIOS utility:

Contains the names of eight tasks and two item showing information about the BIOS ROM type. Blocking a

task and pressing Enter key on your keyboard to enable execution of the task.

Task menu for Q-Flash utility:

Contains the names of four tasks. Blocking a task and pressing Enter key on your keyboard to enable execu-

tion of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash/Dual BIOS utility. Pressing the buttons

mentioned on your keyboards to perform these actions.

Appendix- 55 -

TM

Using the Q-Flash

utility:

This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin"

section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your

computer. If you have already put the floppy disk into your system and have entered the Q-Flash utility,

English

please follow the steps below to flash BIOS.

Steps:

1. Press arrow buttons on your keyboard to move the light bar to "Load Main BIOS from Floppy" item in

the Q-Flash menu and press Enter button.

Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save Main

BIOS to Floppy" item.

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file,

8KNXPU.Fba, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

1 file(s) found

8KNXPU.Fba 512K

BIOS file in the floppy

Auto Recovery Enable

Halt On Error Disable

disk.

Total size : 1.39M Free size : 911.50K

Copy Main ROM Data to Backup

F5 : Refresh DEL : Delete

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

Reading BIOS file from floppy ...

Auto Recovery Enable

Do not turn off power or

>>>>>>>>>>>>>>.....................

Halt On Error Disable

reset your system at this

Copy Main ROM Data to Backup

Don't Turn Off Power or Reset System

Load Default Settings

stage!!

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

GA-8I865PE775-G-RH Motherboard - 56 -

3. Press Y button on your keyboard after you are sure to update BIOS.

English

Then it will begin to update BIOS. The progress of updating BIOS will be displayed.

Please do not take out the floppy disk when it begins flashing BIOS.

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

You can repeat Step 1 to 4

Boot From Main Bios

!! Copy BIOS completed - Pass !!

Auto Recovery Enable

to flash the backup BIOS,

Halt On Error Disable

too.

Copy Main ROM Data to Backup

Please press any key to continue

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after

you exit Q-Flash.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

Auto Recovery Enable

Are you sure to RESET ?

Halt On Error Disable

Copy Main ROM Data to Backup

[Enter] to continure or [Esc] to abort...

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel i875P AGPset BIOS for 8KNXP Ultra Fba

The BIOS file

Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

becomes Fab after

<CPUID : 0F27 Patch ID : 0027>

Memory Testing : 131072K OK

updating.

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For

Xpress Recovery

09/23/2003-i875P-6A79BG03C-00

Appendix- 57 -

4 Channel Analog Audio Output Mode

STEP 1:

Connect the front channels to "Line Out,"

English

the rear channels to "Line In."

Line Out

Line In

STEP 2:

After installing the audio driver, you'll find a Sound

Effect icon on the lower right hand taskbar. Click

the icon to select the function.

STEP 3:

On the AC97 Audio Configuration menu, click the

Speaker Configuration tab and select the

4 channel mode for 4 speaker output check

box.

Clear the Only SURROUND-KIT check box and

press OK.

When the Environment setting is None, the sound

would be performed as stereo mode (2-channel

output). Please select other settings (ex: Living

Room) for 4-channel output.

GA-8I865PE775-G-RH Motherboard - 64 -

English

Basic 6 Channel Analog Audio Output Mode

Use the back audio panel to connect the audio output

without any additional module.

STEP 1:

Connect the front channels to "Line Out",the rear

channels to "Line In", and the Center/Subwoofer chan-

Line In

nels to "MIC In".

MIC In

Line Out

STEP 2:

After installing the audio driver, you'll find a Sound

Effect icon on the lower right hand taskbar. Click

the icon to select the function.

STEP 3:

On the AC97 Audio Configuration menu, click the

Speaker Configuration tab and select the 6

channel mode for 5.1 speaker output check

box.

Clear the Only SURROUND-KIT check box and

press OK.

Appendix- 65 -

Advanced 6 Channel Analog Audio Output Mode (using Audio Combo Kit,Optional Device):

(Audio Combo Kit provides SPDIF output port : optical & coaxis and SURROUND-KIT : Rear R/L &

CEN /Subwoofer)

English

SURROUND-KIT access analog output to rear

channels and Center/Subwoofer channels. It is the

best solution if you need 6 channel output, Line In

and MIC at the same time. "SURROUND-KIT" is

included in the GIGABYTE unique "Audio Combo

Kit" as picture.

STEP 1:

Secure the metal bracket of the"Surround Kit" to the

chassis back panel with a screw.

STEP 2:

Connect the "SURROUND-KIT" cable to the SUR_CEN connector on the M/B.

STEP 3:

Connect the front channels to back audio panel's

"Line Out", the rear channels to SURROUND-KIT's

REAR R/L, and the Center/Subwoofer channels to

SURROUND-KIT's SUB CENTER.

GA-8I865PE775-G-RH Motherboard - 66 -

English

STEP 4:

After installing the audio driver, you'll find a Sound

Effect icon on the lower right hand taskbar.

Click the icon to select the function.

STEP 5:

On the AC97 Audio Configuration menu, click the

Speaker Configuration tab and select the 6

channel mode for 5.1 speaker output check

box.

Select the Only SURROUND-KIT check box and

press OK.

Basic & Advanced 6 Channel Analog Audio Output Mode Notes:

When the Environment setting is None, the sound

would be performed as stereo mode (2-channel

output). Please select the other settings for 6

channels output.

Appendix- 67 -

SPDIF Output Device (Optional Device)

A "SPDIF output" connector is available on the

motherboard. Cable with rear bracket could link to

English

the "SPDIF output" connector (As picture.) For the

further linkage to decoder, rear bracket provides

coaxial cable and Fiber connecting port.

STEP 1:

Secure the metal bracket of the SPDIF Output

device to the chassis back panel with a screw.

STEP 2:

Connect the SPDIF OUT device cable to the SPDIFO

connector on the motherboard.

STEP 3:

Connect SPDIF to the SPDIF decoder.

GA-8I865PE775-G-RH Motherboard - 68 -

English

4-2 Troubleshooting

Below is a collection of general asked questions. To check general asked questions based on a specific

motherboard model, please log on to http://www.gigabyte.com.tw

Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why?

Answer: Some advanced options are hidden in new BIOS version. Please press Ctrl and F1 keys after

entering BIOS menu and you will be able to see these options.

Questions 2: Why is the light of my keyboard/optical mouse still on after computer shuts down?

Answer: In some boards, a small amount of electricity is kept on standby after computer shuts down and

that's why the light is still on.

Question 3: How do I clear CMOS?

Answer: If your board has a Clear CMOS jumper, please refer to the Clear CMOS steps in the manual. If your

board doesn't have such jumper, you can take off the on-board battery to leak voltage to clear CMOS.

Please refer to the steps below:

Steps:

1. Turn off power.

2. Disconnect the power cord from MB.

3. Take out the battery gently and put it aside for about 1 minute (Or you can use a metal object

to connect the positive and negative pins in the battery holder to makethem short for 5

seconds).

4. Re-insert the battery to the battery holder.

5. Connect power cord to MB again and turn on power.

6. Press Del to enter BIOS and load Fail-Safe Defaults(or load Optimized Defaults).

7. Save changes and reboot the system.

Question 4: Why do I still get a weak sound after turning up the speaker to the maximum volume?

Answer: Please make sure the speaker you are using is equipped with an internal amplifier. If not, please

change another speaker with power/amplifier and try again later.

Question 5: Sometimes I hear different continuous beeps from computer after system boots up. What do

these beeps usually stand for?

Answer: The beep codes below may help you identify the possible computer problems. However, they are

only for reference purposes. The situations might differ from case to case.

 AWARD BIOS Beep Codes

1 short: System boots successfully

2 short: CMOS setting error

1 long 1 short: DRAM or M/B error

1 long 2 short: Monitor or display card error

1 long 3 short: Keyboard error

1 long 9 short: BIOS ROM error

Continuous long beeps: DRAM error

Continuous short beeps: Power error

Appendix- 69 -

English

GA-8I865PE775-G-RH Motherboard - 70 -

English

Contact Us

yy

yy

y Taiwan (Headquarters)

yy

y China

yy

GIGA-BYTE TECHNOLOGY CO., LTD.

NINGBO G.B.T. TECH. TRADING CO., LTD.

Address: No.6, Bau Chiang Road, Hsin-Tien,

WEB address : http://www.gigabyte.cn

Taipei 231, Taiwan

Shanghai

TEL: +886-2-8912-4888

TEL: +86-21-63410999

FAX: +886-2-8912-4003

FAX: +86-21-63410100

Tech. and Non-Tech. Support (Sales/Marketing) :

Beijing

http://ggts.gigabyte.com.tw

TEL: +86-10-62102838

WEB address (English): http://www.gigabyte.com.tw

FAX: +86-10-62102848

WEB address (Chinese): http://www.gigabyte.tw

Wuhan

y U.S.A.

yy

yy

TEL: +86-27-87851061

G.B.T. INC.

FAX: +86-27-87851330

TEL: +1-626-854-9338

GuangZhou

FAX: +1-626-854-9339

TEL: +86-20-87540700

Tech. Support:

FAX: +86-20-87544306 ext. 333

http://rma.gigabyte-usa.com

Chengdu

Web address: http://www.gigabyte.us

TEL: +86-28-85236930

y Mexico

yy

yy

FAX: +86-28-85256822 ext. 814

G.B.T Inc (USA)

Xian

Tel: +1-626-854-9338 x 215 (Soporte de habla hispano)

TEL: +86-29-85531943

FAX: +1-626-854-9339

FAX: +86-29-85539821

Correo: soporte@gigabyte-usa.com

Shenyang

Tech. Support:

TEL: +86-24-83992901

http://rma.gigabyte-usa.com

FAX: +86-24-83992909

Web address: http://www.gigabyte-latam.com

yy

y India

yy

yy

y Japan

yy

GIGABYTE TECHNOLOGY (INDIA) LIMITED

NIPPON GIGA-BYTE CORPORATION

WEB address : http://www.gigabyte.in

WEB address : http://www.gigabyte.co.jp

yy

yy

y Australia

y Singapore

yy

yy

GIGABYTE TECHNOLOGY PTY. LTD.

GIGA-BYTE SINGAPORE PTE. LTD.

WEB address : http://www.gigabyte.com.au

WEB address : http://www.gigabyte.com.sg

Appendix- 71 -

yy

yy

y Germany

y Russia

yy

yy

G.B.T. TECHNOLOGY TRADING GMBH

Moscow Representative Office Of GIGA-BYTE Technology

WEB address : http://www.gigabyte.de

Co., Ltd.

yy

yy

y U.K.

WEB address : http://www.gigabyte.ru

English

G.B.T. TECH. CO., LTD.

y Latvia

yy

yy

WEB address : http://www.giga-byte.co.uk

GIGA-BYTE Latvia

y The Netherlands

yy

yy

WEB address : http://www.gigabyte.com.lv

GIGA-BYTE TECHNOLOGY B.V.

yy

y Poland

yy

WEB address : http://www.giga-byte.nl

Office of GIGA-BYTE TECHNOLOGY Co., Ltd. in POLAND

yy

y France

yy

WEB address : http://www.gigabyte.pl

GIGABYTE TECHNOLOGY FRANCE

y Ukraine

yy

yy

WEB address : http://www.gigabyte.fr

WEB address : http://www.gigabyte.kiev.ua

y Italy

yy

yy

yy

y Romania

yy

WEB address : http://www.giga-byte.it

Representative Office Of GIGA-BYTE Technology Co., Ltd.

yy

yy

y Spain

in Romania

GIGA-BYTE SPAIN

WEB address : http://www.gigabyte.com.ro

WEB address : http://www.giga-byte.es

y Serbia & Montenegro

yy

yy

y Czech Republic

yy

yy

Representative Office Of GIGA-BYTE Technology Co., Ltd.

Representative Office Of GIGA-BYTE Technology Co., Ltd.

in SERBIA & MONTENEGRO

in CZECH REPUBLIC

WEB address : http://www.gigabyte.co.yu

WEB address : http://www.gigabyte.cz

yy

y Turkey

yy

Representative Office Of GIGA-BYTE Technology Co., Ltd.

in TURKEY

WEB address : http://www.gigabyte.com.tr

yy

yy

y GIGABYTE Global Service System

To submit a technical or non-technical (Sales/

Marketing) question, please link to :

http://ggts.gigabyte.com.tw

Then select your language to enter the system.

GA-8I865PE775-G-RH Motherboard - 72 -