Gigabyte GA-8I865GVMK: Chapter 4 Appendix

English

Chapter 4 Appendix

4-1 Unique Software Utilities

4-1-1 Xpress Recovery2 Introduction

Xpress Recovery2 is designed to provide quick backup and restora-

tion of hard disk data. Supporting Microsoft operating systems including

Windows XP/2000/NT/98/Me and DOS, and file systems including

FAT16, FAT32, and NTFS, Xpress Recovery2 is able to back up data

on hard disks on PATA and SATA IDE controllers. After Xpress Recovery2 is executed from CD-ROM

for the first time, it will stay permanent in your hard disk. If you wish to run Xpress Recovery2 later, you

can simply press F9 during system bootup to enter Xpress Recovery2 without the CD-ROM.

System requirements:

1. Intel x86 platforms

2. At least 64M bytes of system memory

3. VESA-supported VGA cards

How to use the Xpress Recovery2

Initial access by booting from CD-ROM and subsequent access by pressing the F9 key:

Steps: After entering BIOS Setup, go to Advanced BIOS Feature and set to boot from CD-ROM. Save

the settings and exit the BIOS Setup. Insert the provided driver CD into your CD-ROM drive. Upon

system restart, the message which says "Boot from CD/DVD:" will appear in the bottom left corner

of the screen. Press any key to enter Xpress Recovery2.

After the steps above are completed, subsequent access to Xpress Recovery2 can be made

by simply pressing the <F9> key during system power-on.

.

.

Boot from CD/DVD:

Boot from CD/DVD:

Press any key to startup XpressRecovery2.....

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2005, Award Software, Inc.

Intel 865 BIOS for 8I865GVMK-775 F4

.

.

.

.

<DEL>:BIOS Setup/Q-Flash, <F9>: Xpress Recovery2, <F12>For Boot Menu

<F9> Xpress Recovery2

11/07/2005-I865-6A79HG0GC-00

1. If you have already entered Xpress Recovery2 by booting from the CD-ROM, you can

enter Xpress Recovery2 by pressing the <F9> key in the future.

2. System storage capacity and the reading/writing speed of the hard disk will affect

the data backup speed.

3. It is recommended that Xpress Recovery2 be immediately installed once you com-

plete installations of OS and all required drivers as well as software.

Appendix- 49 -

The Main Screen of Xpress Recovery2

1. RESTORE:

Restore the backed-up data to your hard disk.

(This button will not appear if there is no backup

file.)

English

2. BACKUP:

Back up data from hard disk.

3. REMOVE:

Remove previously-created backup files

to release disk space.

(This button will not appear if there is no backup

file.)

4. REBOOT:

Exit the main screen and restart the system.

Limitations:

1. Not compatible to Xpress Recovery.

2. For the use of Xpress Recovery2, a primary partition must be reserved.

3. Xpress Recovery2 will store the backup file at the end of the hard disk, so free space available

on the hard disk for the backup file must be allocated in advance. (A minimum 4GB is recom-

mended but the actual space is dependent on the size of the data to be backed up)

4. Capable of backing up hard disks installed with Windows operating systems including DOS and

Windows XP/2000/NT/9x/Me.

5. USB hard disks are currently not supported.

6. Does not support RAID/AHCI (class code 0104/0106) hard disks.

7. Capable of backing up and restoring only the first physical hard disk.

Hard disks detection sequence is as follows:

a. PATA IDE primary channel

b. PATA IDE secondary channel

c. SATA IDE channel 1

d. SATA IDE channel 2

e. SATA IDE channel 3

f. SATA IDE channel 4

Precautions:

1. When using hard disks with more than 128G under Windows 2000, be sure to execute the

EnableBigLba.exe program from the driver CD before data backup.

2. It is normal that data backup takes longer time than data restoration.

3. Xpress Recovery2 is compliant with the GPL regulations.

4. On a few motherboards based on Nvidia chipsets, BIOS update is required for Xpress Recovery2

to correctly identify RAID and SATA IDE mode. Please contact your motherboard manufacturer.

5. Xpress Recovery2 supports only PATA hard disks and not SATA hard disks on the following

motherboards (As this is a BIOS-related issue, it can be solved by BIOS update)

GA-K8U

GA-K8NXP-9

GA-8N-SLI Royal

GA-K8U-9

GA-K8N Ultra-9

GA-8N-SLI Pro

GA-K8NXP-SLI

GA-K8NF-9 (PCB Ver. 1.0)

GA-8N-SLI

GA-K8N Ultra-SLI

GA-K8NE (PCB Ver. 1.0)

GA-K8N Pro-SLI

GA-K8NMF-9

GA-8I865GVMK-775 Motherboard - 50 -

English

4-1-2 Flash BIOS Method Introduction

TM

Method 1 : Q-Flash

Utility

TM

Q-Flash

is a BIOS flash utility embedded in Flash ROM. With this utility,

users only have to stay in the BIOS menu when they want to update

TM

BIOS. Q-Flash

allows users to flash BIOS without any utility in DOS or

TM

Windows. Using Q-Flash

indicating no more fooling around with any complicated instructions and

operating system since it is in the BIOS menu.

Please note that because updating BIOS has potential risk, please do it with caution!! We are

sorry that Gigabyte Technology Co., Ltd is not responsible for damages of system because of

incorrect manipulation of updating BIOS to avoid any claims from end-users.

Before You Begin:

TM

Before you start updating BIOS with the Q-Flash

utility, please follow the steps below first.

1. Download the latest BIOS for your motherboard from Gigabyte's website.

2. Extract the BIOS file downloaded and save the BIOS file (the one with model name.Fxx. For example,

8KNXPU.Fba) to a floppy disk.

3. Reboot your PC and press Del to enter BIOS menu.

The BIOS upgrading guides below are separated into two parts.

If your motherboard has dual-BIOS, please refer to Part One.

If your motherboard has single-BIOS, please refer to Part Two.

Part One:

TM

Updating BIOS with Q-Flash

Utility on Dual BIOS Motherboards.

Some of Gigabyte motherboards are equipped with dual BIOS. In the BIOS menu of the motherboards

supporting Q-Flash and Dual BIOS, the Q-Flash utility and Dual BIOS utility are combined in the same

screen. This section only deals with how to use Q-Flash utility.

In the following sections, we take GA-8KNXP Ultra as the example to guide you how to flash BIOS

from an older version to the latest version. For example, from Fa3 to Fba.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel i875P AGPset BIOS for 8KNXP Ultra Fa3

The BIOS file is Fa3

Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

before updating

<CPUID : 0F27 Patch ID : 0027>

Memory Testing : 131072K OK

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For

Xpress Recovery

08/07/2003-i875P-6A79BG03C-00

Appendix- 51 -

TM

Entering the Q-Flash

utility:

Step1: To use Q-Flash utility, you must press Del in the boot screen to enter BIOS menu.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

English

 Standard CMOS Features

Select Language

 Advanced BIOS Features

Load Fail-Safe Defaults

 Integrated Peripherals

Load Optimized Defaults

 Power Management Setup

Set Supervisor Password

 PnP/PCI Configurations

Set User Password

 PC Health Status

Save & Exit Setup

 MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Step 2: Press F8 button on your keyboard and then Y button to enter the Dual BIOS/Q-Flash utility.

TM

Exploring the Q-Flash

/ Dual BIOS utility screen

The Q-Flash / Dual BIOS utility screen consists of the following key components.

Dual BIOS Utility

Dual BIOS utility bar

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Task menu for

Wide Range Protection Disable

Dual BIOS

Boot From Main Bios

Auto Recovery Enable

utility

Halt On Error Disable

Copy Main ROM Data to Backup

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

TM

Q-Flash

utility title

Load Main BIOS from Floppy

Task menu for

bar

Load Backup BIOS from Floppy

TM

Save Main BIOS to Floppy

Q-Flash

utility

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

Action bar

Task menu for Dual BIOS utility:

Contains the names of eight tasks and two item showing information about the BIOS ROM type. Blocking a

task and pressing Enter key on your keyboard to enable execution of the task.

Task menu for Q-Flash utility:

Contains the names of four tasks. Blocking a task and pressing Enter key on your keyboard to enable execu-

tion of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash/Dual BIOS utility. Pressing the buttons

mentioned on your keyboards to perform these actions.

GA-8I865GVMK-775 Motherboard - 52 -

TM

English

Using the Q-Flash

utility:

This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin"

section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your

computer. If you have already put the floppy disk into your system and have entered the Q-Flash utility,

please follow the steps below to flash BIOS.

Steps:

1. Press arrow buttons on your keyboard to move the light bar to "Load Main BIOS from Floppy" item in

the Q-Flash menu and press Enter button.

Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save Main

BIOS to Floppy" item.

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file,

8KNXPU.Fba, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

1 file(s) found

8KNXPU.Fba 512K

BIOS file in the floppy

Auto Recovery Enable

Halt On Error Disable

disk.

Total size : 1.39M Free size : 911.50K

Copy Main ROM Data to Backup

F5 : Refresh DEL : Delete

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

After pressing Enter, you'll then see the progress of reading the BIOS file from the floppy disk.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

Reading BIOS file from floppy ...

Auto Recovery Enable

Do not trun off power or

>>>>>>>>>>>>>>.....................

Halt On Error Disable

reset your system at this

Copy Main ROM Data to Backup

Don't Turn Off Power or Reset System

Load Default Settings

stage!!

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

Appendix- 53 -

3. Press Y button on your keyboard after you are sure to update BIOS.

Then it will begin to update BIOS. The progress of updating BIOS will be displayed.

Please do not take out the floppy disk when it begins flashing BIOS.

English

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

You can repeat Step 1 to

Boot From Main Bios

!! Copy BIOS completed - Pass !!

Auto Recovery Enable

4 to flash the backup

Halt On Error Disable

BIOS, too.

Copy Main ROM Data to Backup

Please press any key to continue

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after

you exit Q-Flash.

Dual BIOS Utility

Boot From......................................... Main Bios

Main ROM Type/Size.............................SST 49LF003A 512K

Backup ROM Type/Size.........................SST 49LF003A 512K

Wide Range Protection Disable

Boot From Main Bios

Auto Recovery Enable

Are you sure to RESET ?

Halt On Error Disable

Copy Main ROM Data to Backup

[Enter] to continure or [Esc] to abort...

Load Default Settings

Save Settings to CMOS

Q-Flash Utility

Load Main BIOS from Floppy

Load Backup BIOS from Floppy

Save Main BIOS to Floppy

Save Backup BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel i875P AGPset BIOS for 8KNXP Ultra Fba

The BIOS file

Check System Health OK , VCore = 1.5250

Main Processor : Intel Pentium(R) 4 1.6GHz (133x12)

becomes Fab after

<CPUID : 0F27 Patch ID : 0027>

Memory Testing : 131072K OK

updating.

Memory Frequency 266 MHz in Single Channel

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Dual BIOS / Q-Flash / F9 For Xpress Recovery

09/23/2003-i875P-6A79BG03C-00

GA-8I865GVMK-775 Motherboard - 54 -

6. Press Del to enter BIOS menu after system reboots. When you are in BIOS menu, move to

English

Load Fail-Safe Defaults item and press Enter to load BIOS Fail-Safe Defaults. Normally the system

redetects all devices after BIOS has been upgraded. Therefore, we highly recommend reloading the

BIOS defaults after BIOS has been upgraded.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 Standard CMOS Features

Select Language

 Advanced BIOS Features

Load Fail-Safe Defaults

 Integrated Peripherals

Load Optimized Defaults

 Power Management Setup

Load Fail-Safe Defaults (Y/N)? Y

Set Supervisor Password

 PnP/PCI Configurations

Set User Password

 PC Health Status

Save & Exit Setup

 MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Press Y on your keyboard to load defaults.

7. Select Save & Exit Setup item to save the settings to CMOS and exit the BIOS menu.

System will reboot after you exit the BIOS menu. The procedure is completed.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 Standard CMOS Features

Select Language

 Advanced BIOS Features

Load Fail-Safe Defaults

 Integrated Peripherals

Load Optimized Defaults

 Power Management Setup

Save to CMOS and EXIT (Y/N)? Y

Set Supervisor Password

 PnP/PCI Configurations

Set User Password

 PC Health Status

Save & Exit Setup

 MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Dual BIOS/Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Press Y on your keyboard to save and exit.

Part Two:

TM

Updating BIOS with Q-Flash

Utility on Single-BIOS Motherboards.

TM

This part guides users of single-BIOS motherboards how to update BIOS using the Q-Flash

utility.

CMOS Setup Utility-Copyright (C) 1984-2004 Award Software

 Standard CMOS Features

Top Performance

 Advanced BIOS Features

Load Fail-Safe Defaults

 Integrated Peripherals

Load Optimized Defaults

 Power Management Setup

Set Supervisor Password

 PnP/PCI Configurations

Set User Password

 PC Health Status

Save & Exit Setup

 MB Intelligent Tweaker(M.I.T.)

Exit Without Saving

ESC: Quit F3: Change Language

F8: Q-Flash F10: Save & Exit Setup

Time, Date, Hard Disk Type...

Appendix- 55 -

TM

Exploring the Q-Flash

utility screen

The Q-FlashBIOS utility screen consists of the following key components.

TM

Q-Flash Utility V1.30

Q-Flash

utility bar

Flash Type/Size.................................SST 49LF003A 256K

English

Keep DMI Data Enable

Task menu for

Update BIOS from Floppy

TM

Q-Flash

utility

Save BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

Action bar

Task menu for Q-Flash utility:

Contains the names of three tasks. Blocking a task and pressing Enter key on your keyboard to enable

execution of the task.

Action bar:

Contains the names of four actions needed to operate the Q-Flash utility. Pressing the buttons mentioned on

your keyboards to perform these actions.

TM

Using the Q-Flash

utility:

This section tells you how to update BIOS using the Q-Flash utility. As described in the "Before you begin"

section above, you must prepare a floppy disk having the BIOS file for your motherboard and insert it to your

computer. If you have already put the floppy disk into your system and have entered the Q-Flash utility,

please follow the steps below to flash BIOS.

Steps:

1. Press arrow buttons on your keyboard to move the light bar to "Update BIOS from Floppy" item in the

Q-Flash menu and press Enter button.

Later, you will see a box pop up showing the BIOS files you previously downloaded to the floppy disk.

If you want to save the current BIOS for backup purpose, you can begin Step 1 with "Save BIOS

to Floppy" item.

2. Move to the BIOS file you want to flash and press Enter.

In this example, we only download one BIOS file to the floppy disk so only one BIOS file,

8GE800.F4, is listed.

Please confirm again you have the correct BIOS file for your motherboard.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

1 file(s) found

8GE800.F4 256K

Keep DMI Data Enable

BIOS file in the floppy

Update BIOS from Floppy

Save BIOS to Floppy

disk.

Total size : 1.39M Free size : 1.14M

Enter : Run :Move ESC:Reset F10:Power Off

F5 : Refresh DEL : Delete

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Reading BIOS file from floppy ...

Keep DMI Data Enable

Do not trun off power or

>>>>>>>>>>>>>>.....................

Update BIOS from Floppy

reset your system at

Save BIOS to Floppy

Enter : Run :Move ESC:Reset F10:Power Off

Don't Turn Off Power or Reset System

this stage!!

After BIOS file is read, you'll see a confirmation dialog box asking you "Are you sure to update BIOS?"

Please do not take out the floppy disk when it begins flashing BIOS.

GA-8I865GVMK-775 Motherboard - 56 -

3. Press Y button on your keyboard after you are sure to update BIOS.

English

Then it will begin to update BIOS. The progress of updating BIOS will be shown at the same time.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

Updating BIOS Now

Do not trun off power or

>>>>>>>>>>>>>>>>>>>.........................

Update BIOS from Floppy

Save BIOS to Floppy

reset your system

Enter : Run :Move ESC:Reset F10:Power Off

Don't Turn Off Power or Reset System

at this stage!!

4. Press any keys to return to the Q-Flash menu when the BIOS updating procedure is completed.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

!! Copy BIOS completed - Pass !!

Update BIOS from Floppy

Save BIOS to Floppy

Please press any key to continue

Enter : Run :Move ESC:Reset F10:Power Off

5. Press Esc and then Y button to exit the Q-Flash utility. The computer will restart automatically after

you exit Q-Flash.

Q-Flash Utility V1.30

Flash Type/Size.................................SST 49LF003A 256K

Keep DMI Data Enable

Are you sure to RESET ?

Update BIOS from Floppy

Save BIOS to Floppy

[Enter] to continure or [Esc] to abort...

Enter : Run :Move ESC:Reset F10:Power Off

After system reboots, you may find the BIOS version on your boot screen becomes the one you flashed.

Award Modular BIOS v6.00PG, An Energy Star Ally

Copyright (C) 1984-2003, Award Software, Inc.

Intel 845GE AGPSet BIOS for 8GE800 F4

The BIOS file

Check System Health OK

Main Processor : Intel Pentium(R) 4 1.7GHz (100x17.0)

becomes F4 after

<CPUID : 0F0A Patch ID : 0009>

Memory Testing : 122880K OK + 8192K Shared Memory

updating

Primary Master : FUJITSU MPE3170AT ED-03-08

Primary Slave : None

Secondary Master : CREATIVEDVD-RM DVD1242E BC101

Secondary Slave : None

Press DEL to enter SETUP / Q-Flash

03/18/2003-I845GE-6A69YG01C-00

6. Press Del to enter BIOS menu after system reboots and "Load BIOS Fail-Safe Defaults". See how

to Load BIOS Fail-Safe Defaults, please kindly refer to Step 6 to 7 in Part One.

Congratulation!! You have updated BIOS successfully!!

Appendix- 57 -

4-2 Troubleshooting

Below is a collection of general asked questions. To check general asked questions based on a specific

motherboard model, please log on to www.gigabyte.com.tw

English

Question 1: I cannot see some options that were included in previous BIOS after updating BIOS. Why?

Answer: Some advanced options are hidden in new BIOS version. Please press Ctrl and F1 keys after

entering BIOS menu and you will be able to see these options.

Questions 2: Why is the light of my keyboard/optical mouse still on after computer shuts down?

Answer: In some boards, a small amount of electricity is kept on standby after computer shuts down

and that's why the light is still on.

Question 3: How do I clear CMOS?

Answer: If your board has a Clear CMOS jumper, please refer to the Clear CMOS steps in the manual.

If your board doesn't have such jumper, you can take off the on-board battery to leak voltage to clear

CMOS. Please refer to the steps below:

Steps:

1. Turn off power.

2. Disconnect the power cord from MB.

3. Take out the battery gently and put it aside for about 10 minutes (Or you can use a metal object

to connect the positive and negative pins in the battery holder to makethem short for one

minute).

4. Re-insert the battery to the battery holder.

5. Connect power cord to MB again and turn on power.

6. Press Del to enter BIOS and load Fail-Safe Defaults(or load Optimized Defaults).

7. Save changes and reboot the system.

Question 4: Why do I still get a weak sound after turning up the speaker to the maximum volume?

Answer: Please make sure the speaker you are using is equipped with an internal amplifier. If not,

please change another speaker with power/amplifier and try again later.

Question 5: Sometimes I hear different continuous beeps from computer after system boots up. What do

these beeps usually stand for?

Answer: The beep codes below may help you identify the possible computer problems. However,

they are only for reference purposes. The situations might differ from case to case.

AMI BIOS Beep Codes

 AWARD BIOS Beep Codes

*

Computer gives 1 short beep when system boots successfully.

1 short: System boots successfully

*Except for beep code 8, these codes are always fatal.

2 short: CMOS setting error

1 beep Refresh failure

1 long 1 short: DRAM or M/B error

2 beeps Parity error

1 long 2 short: Monitor or display card

3 beeps Base 64K memory failure

error

4 beeps Timer not operational

1 long 3 short: Keyboard error

5 beeps Processor error

1 long 9 short: BIOS ROM error

6 beeps 8042 - gate A20 failure

7 beeps Processor exception interrupt error

Continuous long beeps: DRAM error

8 beeps Display memory read/write failure

Continuous short beeps: Power error

9 beeps ROM checksum error

10 beeps CMOS shutdown register read/write error

11 beeps Cache memory bad

GA-8I865GVMK-775 Motherboard - 64 -

English

Appendix- 65 -

English

GA-8I865GVMK-775 Motherboard - 66 -

English

Appendix- 67 -

English

GA-8I865GVMK-775 Motherboard - 68 -

English

Appendix- 69 -

English

GA-8I865GVMK-775 Motherboard - 70 -

English

Contact Us

 

 

 Taiwan (Headquarters)

 Japan

 

 

GIGA-BYTE TECHNOLOGY CO., LTD.

NIPPON GIGA-BYTE CORPORATION

Address: No.6, Bau Chiang Road, Hsin-Tien, Taipei 231,

WEB address : http://www.gigabyte.co.jp

Taiwan

 Singapore

 

 

TEL: +886-2-8912-4888

GIGA-BYTE SINGAPORE PTE. LTD.

FAX: +886-2-8912-4003

Tech. Support :

Tech. Support :

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support(Sales/Marketing) :

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

http://ggts.gigabyte.com.tw/nontech.asp

WEB address: http://www.gigabyte.com.sg

WEB address (English): http://www.gigabyte.com.tw

 

 U.K.

 

WEB address (Chinese): http://chinese.giga-byte.com

G.B.T. TECH. CO., LTD.

 

 U.S.A.

 

Tech. Support :

G.B.T. INC.

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

TEL: +1-626-854-9338

Non-Tech. Support(Sales/Marketing) :

FAX: +1-626-854-9339

http://ggts.gigabyte.com.tw/nontech.asp

Tech. Support :

WEB address : http://uk.giga-byte.com

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

 

 

 The Netherlands

Non-Tech. Support(Sales/Marketing) :

GIGA-BYTE TECHNOLOGY B.V.

http://ggts.gigabyte.com.tw/nontech.asp

Tech. Support :

WEB address : http://www.giga-byte.com

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

 Germany

 

 

Non-Tech. Support(Sales/Marketing) :

G.B.T. TECHNOLOGY TRADING GMBH

http://ggts.gigabyte.com.tw/nontech.asp

Tech. Support :

WEB address : http://www.giga-byte.nl

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

WEB address : http://www.gigabyte.de

Appendix- 71 -

 

 

 China

 

 Russia

 

NINGBO G.B.T. TECH. TRADING CO., LTD.

Moscow Representative Office Of GIGA-BYTE Technology Co.,

Tech. Support :

Ltd.

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

Tech. Support :

English

Non-Tech. Support(Sales/Marketing) :

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

http://ggts.gigabyte.com.tw/nontech.asp

Non-Tech. Support(Sales/Marketing) :

WEB address : http://www.gigabyte.com.cn

http://ggts.gigabyte.com.tw/nontech.asp

Shanghai

WEB address : http://www.gigabyte.ru

TEL: +86-021-63410999

 

 

 Poland

FAX: +86-021-63410100

Office of GIGA-BYTE TECHNOLOGY Co., Ltd. in POLAND

Beijing

Tech. Support :

TEL: +86-10-62102838

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

FAX: +86-10-62102848

Non-Tech. Support(Sales/Marketing) :

Wuhan

http://ggts.gigabyte.com.tw/nontech.asp

TEL: +86-27-87851061

WEB address : http://www.gigabyte.pl

FAX: +86-27-87851330

 

 Serbia & Montenegro

 

GuangZhou

Representative Office Of GIGA-BYTE Technology Co., Ltd. in

TEL: +86-20-87586074

SERBIA & MONTENEGRO

FAX: +86-20-85517843

Tech. Support :

Chengdu

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

TEL: +86-28-85236930

Non-Tech. Support(Sales/Marketing) :

FAX: +86-28-85256822

http://ggts.gigabyte.com.tw/nontech.asp

Xian

WEB address: http://www.gigabyte.co.yu

TEL: +86-29-85531943

 Czech Republic

 

 

FAX: +86-29-85539821

Representative Office Of GIGA-BYTE Technology Co., Ltd. in

Shenyang

CZECH REPUBLIC

TEL: +86-24-23960918

Tech. Support :

FAX: +86-24-23960918-809

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

 

 Australia

 

Non-Tech. Support(Sales/Marketing) :

GIGABYTE TECHNOLOGY PTY. LTD.

http://ggts.gigabyte.com.tw/nontech.asp

Tech. Support :

WEB address: http://www.gigabyte.cz

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

 

 

 Romania

Non-Tech. Support(Sales/Marketing) :

Representative Office Of GIGA-BYTE Technology Co., Ltd. in

http://ggts.gigabyte.com.tw/nontech.asp

Romania

WEB address : http://www.giga-byte.com.au

Tech. Support :

 France

 

 

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

GIGABYTE TECHNOLOGY FRANCE S.A.R.L.

Non-Tech. Support(Sales/Marketing) :

Tech. Support :

http://ggts.gigabyte.com.tw/nontech.asp

http://tw.giga-byte.com/TechSupport/ServiceCenter.htm

WEB address: http://www.gigabyte.com.ro

Non-Tech. Support(Sales/Marketing) :

http://ggts.gigabyte.com.tw/nontech.asp

WEB address : http://www.gigabyte.fr

GA-8I865GVMK-775 Motherboard - 72 -