Beko WKE 13580 D: Function Selection
Function Selection: Beko WKE 13580 D
EN
Function Selection
Depending on the selected program, the
on. Since it is not possible to select some
selectable auxiliary functions are selected
of the auxiliary functions together, one of
by pressing the each function’s button.
them becomes off when the other one is
The light of the selected function comes
selected.
Auxiliary Functions
Prewash
wrinkled in the waterless environment.
To wash the very dirty laundries, you can
After this process, you can resume the
use this function in the cotton and
program by pressing the Rinse Hold but-
synthetic programs.
ton again.
Rinse Plus
Spin Speed Selection
You can increase the number of the
Using this button, you can select final spin
current rinsing cycles by using this
speed upto 800 rpm. If you do not want to
function. Thus, the risk of the sensitive
apply spinning to your clothes, select “No
skins get effected by the detergent
Spin” option.
remaining on the laundry is reduced.
Rinse Hold
If you do not take out the laundries at
the end of the synthetic and woolen
programs, you can leave them in the last
rinsing water by pressing the Rinse Hold
button in order to prevent them getting
Child Lock
“This machine is equipped with a child lock
to initiate a new program or interfere the
in order to prevent the program flow to be
program. Therefore, when the same
affected when the buttons are pressed
buttons are pressed for 3 seconds, light of
during washing cycles. In order to enable
the second auxiliary function will go off.
the child lock, press and keep pressed the
1st and 2nd auxiliary function buttons from
the left at the same time for 3 seconds.
The light of the 1st auxiliary function button
will flash continuously.
After the program completes, it is
necessary to disable the child lock in order
Program Flow
After the machine starts to operate, the
on. After the program is complete, the
related light in the program follow-up
machine will not allow you to open the door
indicator comes on according to the
for a while for your safety. If you want to
selected program.
When a step is complete, the light of the
open the door meanwhile, the door will not
previous step goes off and the light of the
open and the “Door” light will flash. After
related step comes on. When On/Off button
the door lock is deactivated the “Door” and
is pressed, the “Door” light comes on.
“End” lights will come on. Now you can
After the washing program is selected,
open the front door. You can switch your
“Washing” light on the program follow-up
machine in to the “Pause” mode by press-
indicator comes on when the “Start/Pause/
ing the “Start/Pause/Cancel” button while
Cancel” button is pressed.
your machine is operating.
When the program ends “End” light comes
In this case, “Start/Pause/Cancel” light will
29
Оглавление
- Содержание
- Ваша стиральная машина
- Спецификация Вашей стиральной машины
- Предостережения
- Установка 1. Удаление упаковочных креплений
- Соединения для воды
- Подключение к электросети
- Выбор программы и эксплуатация Вашей машины Панель управления
- Табличка выбора программы
- Выбор функции
- Изменение программы
- Разгрузка машины
- Чистка фильтра насоса
- Contents
- Your Washing Machine
- Models
- Warnings
- Things to do Before Calling the Authorized Service
- Installation 1. Removing the packaging reinforcements
- Water connections
- Electrical Connection
- Program Selection and Operating Your Machine Control Panel
- Program selection table
- Function Selection
- Changing the Program
- Unloading the Laundries
- Hose