Beko WKE 13580 D: Changing the Program

EN

flash. You can make some changes in the

In order to return to the “Washing” mode

program settings in the Pause mode

from the “Pause” mode, you need to press

(See. Changing the Program) and you may

the “Start/Pause/Cancel” button again.

also benefit from the laundry addition

In this case, “Start/Pause/Cancel” light

function if the “Pause” mode is selected at a

will flash and your machine will resume its

suitable step of the program (See. Laundry

program.

addition function).

Changing the Program

Even if a new program is selected by

make any desired changes after pressing

changing the position of program selection

the “Start/Pause/Cancel” button.

knob while your machine is operating, the

first selected program continues to run.

If you want to change the spin speed

In order to change the washing program,

while your machine is operating, press the

the ongoing program should be cancelled.

“Start/Pause/Cancel” button, select the

(See. Cancelling a program)

spin speed and press the “Start/Pause/

In order to change the auxiliary functions

Cancel” button again.

while your machine is operating, you can

Laundry Addition Function

If you want to add laundry to your machine

and you can open the door and add

after the washing program starts, switch

laundry. If the “Door” light is not

the machine to pause mode by pressing

continuously on at the end of this period,

“Start/Pause/Cancel” button. If the water

the water level in the machine is not

level in the machine is suitable, the “Door”

suitable and you can not add laundry.

light on the program follow-up indicator

You can resume the program by pressing

comes on approximately 2 minutes later

“Start/Pause/Cancel” button again.

Cancelling a program

In order to cancel the selected program,

can start a program by selecting a new

“Start/Pause/Cancel” button is pressed for

program.

3 seconds and machine starts to drain at

The selected program continues to run

the end of this time. Meanwhile, “Washing”

even if the position of program selection

and “End” lights are on. After the drainage

knob is changed while your machine is

process completes “Start/Pause/Cancel”

operating. In order to change the washing

and “Washing” lights are off. “Door” light

program, a new program can be selected

starts to flash. When the “Door” light is

and started after “Cancelling a program”

on continuously, the door can be opened

by pressing the “Start/Pause/Cancel”

and a new program can be selected. You

button for 3 seconds as described above.

End of the Program

When the program ends “End” light on the

changed when the machine is at the end

program follow-up indicator comes on.

of a program, “End” light goes off and only

“End” and “Door” lights come on within

the “Door” light remains on. Meanwhile,

two minutes after the door is opened,

if the door is still locked, the “Door” light

the machine becomes ready for the next

flashes until the door is opened. To turn

washing. If any of the buttons is pressed

the machine off, press the “On/Off” button.

or the position of the selection knob is

30