JVC KD-G441: ~

16

ENGLISH

You can connect an external component to the 

AUX (auxiliary) input jack on the control panel.

~

•  You can also select “AUX IN” as the playback 

source by pressing the SRC (source) button.

Ÿ

  Turn on the connected component and 

start playing the source.

!

  Adjust the volume.

⁄

  Adjust the sound as you want. (See 

page 13.)

To check the other information while 

listening to an external component

Other external component operations

Indications

Item

(       : Initial)

Selectable settings, [reference page]

SUB.W FREQ 

*

6

Subwoofer cutoff 

frequency

• 

LOW

• 

MID

• 

HIGH

:   Frequencies lower than 90 Hz are sent to the subwoofer.

:   Frequencies lower than 135 Hz are sent to the subwoofer.

:   Frequencies lower than 180 Hz are sent to the subwoofer.

TAG DISPLAY

Tag display

• 

TAG ON

• 

TAG OFF

:  Shows the Tag information while playing MP3/WMA tracks, [12].

:   Cancels.

AMP GAIN

Amplifier gain control

• 

LOW POWER

• 

HIGH POWER

:  VOLUME 00 – VOLUME 30 (Select this if the maximum power of the 

speaker is less than 50 W to avoid them from damaging the speaker.)

:  VOLUME 00 – VOLUME 50

IF BAND

Intermediate 

frequency band

• 

AUTO

• 

WIDE

:  Increases the tuner selectivity to reduce interference noise between 

close stations. (The stereo effect may be lost.)

:  Subject to the interference noise from adjacent stations, but the 

sound quality will not be degraded and the stereo effect will remain.

*

6

  For KD-G441: Displayed only when “L/O MODE” is set to “SUB.W.”

AUX IN 

Ô

 Clock

3.5 mm stereo mini 

plug (not supplied)

Portable audio player, etc

EN08-17_KD-G441_003A_4.indd   16

EN08-17_KD-G441_003A_4.indd   16

10/24/07   10:04:18 AM

10/24/07   10:04:18 AM