Acme PLB110S: Unpacking instructions Important safety information

GB

GB

Unpacking instructions

This TV mount must be securely attached to the

vertical wall. If the mount is not properly installed it

• Carefully open the carton, remove contents and lay out on cardboard

may fall, resulting in possible injury and/or damage.

WARNING

or other protective surface to avoid damage.

• Check package contents against the Supplied Parts List in the next

•3/8”(10mm)

•5/32"(4mm) Drill Bit

• Wrench or Socket Set

page to assure that all components were received undamaged. Do

Tools Required

Masonry Bit

•Screwdriver

• Carpenter’s Level

•Stud Finder

not use damaged or defective parts.

• Carefully read all instructions before attempting installation.

Note: The mounting components and hardware supplied in this package

are not designed for installations to walls with steel studs or to cinder block

walls. If the hardware you need for your installation is not included, please

Important safety information

consult your local hardware store for proper mounting hardware for the

Install and operate this device with care. Please read this instruction

application.

before beginning the installation, and carefully follow all instructions

contained herein. Use proper safety equipment during installation.

Please call a qualied installation contractor for help if you:

• If you don’t understand these directions or have any doubts about the

safety of the installation.

• If you are uncertain about the nature of your wall, consult a qualied

installation contractor.

Do not use this product for any purpose or in any conguration not

explicitly specied in this instruction. We hereby disclaim any and all

liability for injury or damage arising from incorrect assembly, incorrect

mounting, or incorrect use of this product.

4

5