Acme PLB110S: Attaching monitor to wall plate Levelling mount and adding the safety bolts

GB

GB

Attaching monitor to wall plate

Levelling mount

You can re-level the mount after the mount has been installed on wall.

and adding the safety bolts

Levelling is achieved by rotating the front plate the TV sits on. First,

Warning: Some TVs may require two people to lift! We are not responsible

remove the TV from mount. Then slightly loosen the 5 screws using the

for personal injury or product damage.

Allen Key. Place level on top front of plate as shown and level accordingly.

Tighten the 5 screws, do not over tighten.

First hook the Monitor Brackets(b,c) over the top of the wall Plate(a), then

let the bottom of the Monitor Brackets rotate to the bottom of the Wall

Plate as shown in the Diagram 3A. Use the Allen Key(d) to tighten the

safety bolts. Then the Monitor Bracket will sit behind the bottom tab on

Diagram 4

the Wall Plate as shown in the Diagram 3B.

Diagram 3BDiagram 3A

Safety bolt

wall wall

WARNING!

Use two people to lift and position the TV onto the Wall Plate.

Thanks for choosing our products, enjoy the using.

10

11