ZyXEL Communications ZyXEL ZyWALL USG-1000: 3 Connecting the Hardware

ENGLISH

3

3 Connecting the Hardware

Make sure that the power switch on the rear panel is turned off before you make the hardware connections.

1

It is recommended that you configure the ZyWALL before using it to protect your network. Use an Ethernet 

cable to connect a computer to port 

1

.

2

Use another Ethernet cable(s) to connect port 

2 

and/or port 

3

 to an Ethernet jack with Internet access.  

3

Use the included power cord to connect the power socket on the rear panel to a power outlet. 

4

Push the power switch to the on position and

look at the front panel. The 

PWR 

light turns on. The 

SYS 

light 

blinks during system testing and initialization and then stays on when the system is ready.

4 Web Login

1

Launch your web browser and go to 

http://192.168.1.1

(the ZyWALL automatically redirects you to https://

192.168.1.1). 

Internet

2 51

ENGLISH

4

2

Click 

Yes

 to proceed if you get a security alert or 

certificate screen.

3

Enter 

admin

 as the user name and 

1234

 as 

the password. Click 

Login

.

4

It is strongly recommended that you change the 

password. Type and retype a new password, and click 

Apply

.