Xoro HSD 8410: BASIC CONNECTIONS

BASIC CONNECTIONS

Connecting to a TV

Ensure that the power switch of this unit and other equipment to be connected is turned

off before commencing connection.

Read through the instructions before connecting other equipment.

Ensure that you observe the colour-coding when connecting audio and video cords.

Please use only one kind of connection with TV set for the unit and choose correct video

output setting, otherwise there may be image distortion.

To get better viewing quality, you are advised using S-video cord to connect the TV set

with S-video input meanwhile changing the TV set to S-video input format.

English

Connecting to a stereo TV

Audio Output (left)

Audio Output (right)

The TV set with Y, Cb, Cr input can get more clear picture and realistic image when it

connects to Y, Cb, Cr output jacks of this player. The Video out setting must be set as

YUV if you use Y, Cb, Cr output.

Notes:

1. Choose below speaker setting in the Audio menu if you use the TV speaker.

• Front: Large

• Center/Rear/Subwoofer: OFF

At this setting situation which is Stereo effect, the signal from Audio output L, R is

the same as the FL, FR output, also the same as the audio signal from Scart jack.

2. Only one kind of connection to the TV set can be made. If your TV set does not

support Y Pb Pr function, do not switch the VIDEO OUT to Y Pb Pr of the unit,

otherwise there will be no picture output.

13

Component Video Output

TV