Imetec SENSUIJ SM2-200: EN

EN

AUTOMATIC SHUTDOWN

The massager turns itself off automatically after 15 minutes. This function does not replace the normal

turning off of the product, which must be off when not in use.

When the product is switched off, the massaging mechanism always returns to "LOWER" position. When

switched on again, the massage starts from this position.

Disconnect the plug after use.

MAINTENANCE AND STORAGE

Always disconnect the appliance from the mains supply before cleaning or maintenance and when the

appliance is not in use.

The massager can be cleaned with a soft slightly damp cloth. It is also possible to use a light detergent.

Keep the massaging appliance out of children’s reach in a cool dry place.

PROBLEMS AND SOLUTIONS

These appliances are built with the highest standards. No parts can be repaired by the user. If the appliance

does not work, follow the solutions.

Problem Possible cause Solution

The appliance makes noise

This is evitable, but the

It does not affect the duration of the

during use.

appliance is not faulty.

appliance.

Has it been used for too

Turn the appliance off and have it rest

Noise during the massage grows.

long without interruption?

for over an hour.

Irregular right or left movements

It is structural. It is not an alteration.

of massager mechanism.

Has it switched off because

Press the start button again.

of the timer?

Is the plug still in the

Insert the plug in the socket.

socket?

It does not move or else it stops

during the massage.

Is the switch on? Turn the appliance on.

Remove the weight and wait a few

Has the appliance turned

minutes. The appliance will turn back

off for excessive weight?

on.

If other situations not included above should occur, pull out the plug, wait a few minutes, put the plug back

in and turn the appliance back on.

Should the appliance keep on having problems, contact the authorised assistance centre.

44