Fieldmann FZV 2001-E: 10. WHAT TO DO “IF…”

18EN What to do “if…”

10. WHAT TO DO “IF…”

When… Possible cause Remedy

Engine does not

No current in the socket Check power supply

start

Defective cable Check the cable, plug, replace or let it

repaired by a skilled person if needed

Defective safety combined

Let it repaired in an authorized service station

switch /connector

Protection against overheating

1. Too deep swath, adjust a shorter swath

activated

depth

2. Roll blocked, remove the obstacle

3. Grass too high, trim the lawn before

beginning the work

Before going on working, wait about 15 min

till the engine cools down

Unusual noise Roll got stuck Switch-off the equipment and wait till the

roll gets stopped completely Remove the

obstacle

Toothed belt slips Let it repaired in an authorized service station

Loose bolts, nuts or other

Tighten all parts, if the noise persists, contact

connecting elements

an authorized service station

Strong vibrations,

Cutting blades damaged or

Replace the roll for a new one or let it checked

noise

worn-out

in an authorized service station

Too deep swath Adjust the proper swath depth

Grass too high Trim the lawn before aeration

Insufficient

Low swath depth Adjust the proper swath depth

verticutting

Worn-out blades Replace the roll for a new one or let it checked

in an authorized service station

Exhausting channel blocked Empty the collection box and remove

obstacles

FZV 2001-E