Beko WMB 81231 PTLMC: A

at the end of the hose. When the

container is full, block the inlet of

the hose by replacing the plug. After

the container is emptied, repeat the

above procedure to drain the water in

the machine completely.

c. When draining of water is finished,

close the end by the plug again and

fix the hose in its place.

d. Turn the pump filter to take it out.

Discharging the water when the product

does not have an emergency draining

hose:

a. Place a large container in front of the

filter to catch water from the filter.

b. Loosen pump filter (anticlockwise)

until water starts to flow. Fill the

flowing water into the container

you have placed in front of the filter.

Always keep a piece of cloth handy to

absorb any spilled water.

c. When the water inside the machine is

finished, take out the filter completely

by turning it.

4. Clean any residues inside the filter as

well as fibers, if any, around the pump

impeller region.

5. Install the filter.

If your product has a water jet feature,

A

be sure to fit the filter into its housing

in the pump. Never force the filter

while installing it into its housing. Seat

the filter into its place completely.

Otherwise, water may leak from the

filter cap.

6. If the filter cap is composed of

two pieces, close the filter cap by

pressing on the tab. If it is one piece,

seat the tabs in the lower part into

their places first, and then press the

upper part to close.

28

EN