Acme PB01: 2. How to charge devices with PB01: Connect device to PB01 using
2. How to charge devices with PB01: Connect device to PB01 using: Acme PB01
Table of contents
- Introduction Features Specification Instruction
- 2. How to charge devices with PB01: Connect device to PB01 using
- 3. How to check power level of PB01: Keep pressing the switch button 4. How to turn on/o the LED lamp: Quickly double click the switch button.
- NOTICE: Waste Electrical and Electronic Equipment (WEEE) Symbol
GB
alternately light up in a row when charging. Each light indicates 25%
power. Charging time is approximately 2 to 3.5 hours dependent on
current output.
2. How to charge devices with PB01: Connect device to PB01 using
the USB cable, then keep pressing the switch button for 1 second
to activate the PB01. Four lights respectively turn o in a row which
means PB01 is discharging while device is getting charged. Keep
pressing the switch button for 1 second to turn it o. Charging time
depends on battery capacity.
4 5
Top 10 manuals
100.00
NZXT HALE90 1000W99.99
Samsung SM-R38099.97
AEG BSB 18C99.97
Dell 2700W99.97
Smeg KSEC70X99.96
Beurer HDE 4099.96
Pyramida KH 50 v.299.96
MSI CSM-H81M-P3299.96
AEG HR 562799.95
Melissa 640-048