Acme KE-200: operation

GB

operation

It is recommended to use the kettle for several times following instructions given below and to

removeremainingwaterbeforerstusage.Thiswillremoveanymaterialsordustremainedinthe

appliancefromthemanufacturingprocess.

1.OpenthelidbyturningtheLidupwhilepressingtheLidbuttonandpourwaterintothekettle.

Thenreplacethelid,otherwisethekettlewouldnotbeabletoturnothepowerautomatically

afterwaterhasboiled.

Caution: the lled water level must be between the “Max” and “Min” level as indicated on the housing. Too little water

will damage the heat element and if the kettle is overlled, boiling water may splash out.

2.Replacethekettleonthepowerbaseandconnecttopowersupply.Positionthekettlesothat

thespoutofthekettleisfacingawayfromyou.

3.Presstheswitchbuttonto“I”positionandthelightwillashon.Andwaterwillstarttoheatup.

Donotopenthelidwhilethewaterisboiling.

Caution: Ensure that the switch is clear of obstructions and the lid is rmly closed. The kettle will not turn o if the

switch is constrained or if the lid is left open.

4.Powerwillbecutoautomaticallyandtheswitchwillbebackto“0”positiononcewaterhas

beenboiled.Andthelightwillbeo.

5.Liftthekettlefromthepowerbaseandthenpourthewater.

Note: Be careful when pouring water from the kettle, as boiling water may cause scalding.

6.Theboilingprocesscanbeterminatedatanytimebyliftingthekettleothepowerbaseor

pressingtheswitchto“0”position.

7