Acme F100-01: Replacing the Remote Control Battery Technical Parameters Security and Disposal Hints for Batteries

GB

Replacing the Remote Control Battery

1. Remove the battery compartment cover by pulling the cover in

the direction of the arrow.

2. Remove the battery.

3. Insert the replacement battery.

• Keep attention on the direction of the correct polarization (+/-).

4. Put the cover back to the battery compartment.

Technical Parameters

Storage temperature: -5°C up to +45°C

Working conditions temperature: 0°C up to +40°C

Operation relative humidity: 20% – 90% (40°C)

Storage relative humidity: 20% – 93% (40°C)

EMI standard: FCC (class B)

Supply voltage: 12V-24V DC power

Electric current: 12V (normal working) <100mA

Bit rate: 32Kbps – 256Kbps

FM transmitting frequency: 87.5 – 108.0 MHz

Transmitting frequency options: Press CH key to switch channels

(can be stored in advance).

Frequency response: 30 – 15 KHz ± 3db

SNR (Signal to Noise Ratio): 30db

Harmonic distortion: ≤1%

Transmitting distance: 3 – 5 m

Security and Disposal Hints for Batteries

When a child swallowed a battery by mistake go to a doctor’s •

place or bring the child into a hospital promptly!

Never short batteries.•

Look for the right polarity (+) and (-) of batteries! Always change •

all batteries, never use old and new batteries or batteries of

erent types together.