Husqvarna 236: GENERAL SAFETY PRECAUTIONS
GENERAL SAFETY PRECAUTIONS: Husqvarna 236
GENERAL SAFETY PRECAUTIONS
General rules
Cutting equipment
This section describes how to choose and maintain your
cutting equipment in order to:
• Reduce the risk of blade thrust.
Only use cutting attachments with the guards we
• Obtain maximum cutting performance.
recommend! See the chapter on Technical data.
• Extend the life of cutting equipment.
IMPORTANT!
Only use cutting attachments with the guards we
recommend! See the chapter on Technical data.
Refer to the instructions for the cutting attachment to
Keep the teeth of the blade correctly sharpened! Follow
check the correct way to load the cord and the correct
our instructions and use the recommended file gauge. An
cord diameter.
incorrectly sharpened or damaged blade increases the
risk of accidents.
Keep the teeth of the blade correctly sharpened! Follow
our recommendations. Also refer to the instructions on
the blade packaging.
WARNING! Always stop the engine
before doing any work on the cutting
!
attachment. This continues to rotate even
after the throttle has been released.
Check the cutting attachment for damage or cracks. A
Ensure that the cutting attachment has
damaged cutting attachment should always be replaced.
stopped completely and disconnect the
HT lead from the spark plug before you
start to work on it.
WARNING! Using an incorrect cutting
attachment or an incorrectly sharpened
!
blade increases the risk of blade thrust.
Sharpening grass cutters and grass
Cutting equipment
blades
Grass blades and grass cutters are intended for cutting
coarse grass.
• See the cutting attachment packaging for correct
sharpening instructions. Sharpen blades and cutters
using a single-cut flat file.
• Sharpen all edges equally to maintain the balance of
the blade.
A trimmer head is intended for trimming grass.
English – 63
!
H1153278-30,236R.fm Page 63 Friday, December 4, 2009 1:21 PM
WARNING! Always discard a blade that is
bent, twisted, cracked, broken or
damaged in any other way. Never attempt
to straighten a twisted blade so that it
can be reused. Only use original blades
of the specified type.
H1153278-30,236R.fm Page 64 Friday, December 4, 2009 1:21 PM
GENERAL SAFETY PRECAUTIONS
Trimmer head
IMPORTANT!
Always ensure the trimmer cord is wound tightly and
evenly around the drum, otherwise the machine will
generate harmful vibration.
• Only use the recommended trimmer heads and
trimmer cords. These have been tested by the
manufacturer to suit a particular engine size. This is
especially important when a fully automatic trimmer
head is used. Only use the recommended cutting
attachment. See the chapter on Technical data.
• Smaller machines generally require small trimmer
heads and vice versa. This is because when clearing
using a cord the engine must throw out the cord
radially from the trimmer head and overcome the
resistance of the grass being cleared.
• The length of the cord is also important. A longer cord
requires greater engine power than a shorter cord of
the same diameter.
• Make sure that the cutter on the trimmer guard is
intact. This is used to cut the cord to the correct length.
• To increase the life of the cord it can be soaked in
water for a couple of days. This will make the line
tougher so that it lasts longer.
64 – English
Оглавление
- A CLARA CIÓN DE LOS SÍMBOLOS
- ÍNDICE
- INTR ODUCCIÓN
- ¿Q UÉ ES Q UÉ?
- INSTR UCCIONES GENERALES DE SEGURID AD
- INSTR UCCIONES GENERALES DE SEGURID AD
- INSTR UCCIONES GENERALES DE SEGURID AD
- INSTR UCCIONES GENERALES DE SEGURID AD
- INSTRUCCIONES GENERALES DE SEGURIDAD
- INSTRUCCIONES GENERALES DE SEGURIDAD
- MONTAJE
- MONTAJE
- MONTAJE
- MANIPULACION DEL COMBUSTIBLE
- MANIPULACION DEL COMBUSTIBLE
- ARRANQUE Y PARADA
- ARRANQUE Y PARADA
- TÉCNICA DE TRABAJO
- TÉCNICA DE TRABAJO
- MANTENIMIENTO
- DATOS TECNICOS
- EXPLICAÇÃO DOS SÍMBOLOS
- ÍNDICE
- INTRODUÇÃO
- COMO SE CHAMA?
- INTRUÇÕES GERAIS DE SEGURANÇA
- INTRUÇÕES GERAIS DE SEGURANÇA
- INTRUÇÕES GERAIS DE SEGURANÇA
- INTRUÇÕES GERAIS DE SEGURANÇA
- INTRUÇÕES GERAIS DE SEGURANÇA
- INTRUÇÕES GERAIS DE SEGURANÇA
- MONTAGEM
- MONTAGEM
- MONTAGEM
- MANEJO DE COMBUSTÍVEL
- MANEJO DE COMBUSTÍVEL
- ARRANQUE E PARAGEM
- ARRANQUE E PARAGEM
- TÉCNICA DE TRABALHO
- TÉCNICA DE TRABALHO
- MANUTENÇÃO
- ESPECIFICAÇÕES TÉCNICAS
- KEY TO SYMBOLS
- CONTENTS
- INTRODUCTION
- WHAT IS WHAT?
- GENERAL SAFETY PRECAUTIONS
- GENERAL SAFETY PRECAUTIONS
- GENERAL SAFETY PRECAUTIONS
- GENERAL SAFETY PRECAUTIONS
- GENERAL SAFETY PRECAUTIONS
- ASSEMBLY
- ASSEMBLY
- ASSEMBLY
- FUEL HANDLING
- FUEL HANDLING
- STARTING AND STOPPING
- STARTING AND STOPPING
- WORKING TECHNIQUES
- WORKING TECHNIQUES
- MAINTENANCE
- TECHNICAL DATA
- Ÿ‘…ˆ… ‘ˆŒ‚‹‚
- ‘„…†ˆ…
- ‚‚…„…ˆ…
- —’ …‘’œ —’?
- ™ˆ… …„ˆ‘ˆŸ …‡‘‘’ˆ
- ™ˆ… …„ˆ‘ˆŸ …‡‘‘’ˆ
- ™ˆ… …„ˆ‘ˆŸ …‡‘‘’ˆ
- ™ˆ… …„ˆ‘ˆŸ …‡‘‘’ˆ
- ™ˆ… …„ˆ‘ˆŸ …‡‘‘’ˆ
- ™ˆ… …„ˆ‘ˆŸ …‡‘‘’ˆ
- ‘Š
- ‘Š
- ‘Š
- ‚ˆ‹ ™…ˆŸ ‘ ’‹ˆ‚Œ
- ‚ˆ‹ ™…ˆŸ ‘ ’‹ˆ‚Œ
- ‡“‘Š ˆ ‘’‚Š
- ‡“‘Š ˆ ‘’‚Š
- Œ…’ä ’›
- Œ…’ä ’›
- ’…•ˆ—…‘Š… ‘‹“†ˆ‚ˆ…
- ’…•ˆ—…‘Šˆ… •Š’…ˆ‘’ˆŠˆ
- S35
- T35, T35x
- T45, T45x
- T55x
- Trimmy SII
