Husqvarna 236: ASSEMBLY

H1153278-30,236R.fm Page 68 Friday, December 4, 2009 1:21 PM

ASSEMBLY

situation that requires you to free yourself from the

Fitting the transport guard

machine and harness.

• Insert the blade in the transport guard (A).

• Snap the two fasteners (B) into the slots (C) to secure

the transport guard.

Spreading the load on your shoulders

A well-adjusted harness and machine makes work much

easier. Adjust the harness for the best working position.

Tension the side straps so that the weight is evenly

distributed across both shoulders.

2-teeth blade

• Insert the blade in the transport guard.

Correct height

Adjust the shoulder strap so that the cutting attachment is

parallel to the ground.

Adjusting the harness and brush

cutter

WARNING! When using a brush cutter it

must always be hooked securely to the

!

harness. Otherwise you will be unable to

control the brush cutter safely and this

can result in injury to yourself or others.

Never use a harness with a defective

Correct balance

quick release.

Let the cutting attachment rest lightly on the ground.

Adjust the position of the suspension ring to balance the

Quick release

brush cutter correctly.

At the front is an easily accessible, quick release. Use this

if the engine catches fire or in any other emergency

68 – English