Garmin 1000: Troubleshooting
Troubleshooting: Garmin 1000

Troubleshooting
• Interference may occur if multiple platforms are present. Please use only one platform in any given area.
• Do not step onto the platform before the platform beeps once and the Green Indicator Light blinks.
• Do not step off until after hearing a double beep or the Green Light remains solid (stops blinking), the measurement is taken, and
the readings are displayed on the applicable device (e.g. Garmin Watch, Tanita Remote Display, and/or PC).
• If you do not step onto the platform within 30 seconds after Green Indicator Light begins blinking, the power will shut-off
automatically.
• Constant Red Indicator Light
Make sure socks or stockings are removed, and the soles of your feet are clean and properly aligned on the measuring platform.
(see p.2)
Make sure to step onto the platform only after it has beeped twice or the Green Indicator Light is blinking.
The unit cannot accurately measure your weight if it detects movement. Please stand on the platform keeping movement to a
minimum.
If Body Fat Percentage is more than 75%, readings cannot be obtained from the unit.
Reading cannot be obtained if the weight capacity is exceeded. Weight capacity is 200kg / 440lb / 31st. 6lb.
• Blinking Red Indicator Light
Batteries are low. When the Red Indicator Light is blinking, replace the batteries immediately, since weak batteries will affect the
accuracy of your measurements. Change all the batteries at the same time with new batteries.
Specifications
Notice:
BC-1000
These marks can be found out on contaminant-containing
Weight Capacity
Batteries: Pb Pb = Battery contains lead,
200kg / 440lb / 31st. 6lb
Cd Cd = Battery contains cadmium,
Weight Increments
Hg Hg = Battery contains mercury.
0.1kg / 0.2lb / 0.2lb
Power Supply
Not allowed to mix batteries with consumer
DC 6V (LR6 - AA Battery x 4 included)
wastes!
Power Consumption
As consumer you are legally bound to return used or discharged batteries.
100 mA maximum
You can deposit your old batteries at the public collecting points in your
Temperature Range of usage
town, or wherever the corresponding batteries are sold and specifically
41°F - 95°F / 5°C - 35°C
marked collecting boxes have been set up. In case of scrapping the
apparatus, the batteries should be removed from it and deposited at the
collecting points as well.
We hereby declare that this equipment is in compliance with
the essential requirements and other relevant provisions of
Directive 1999/5/EC.
5
BC-1000win.indd 5 2010/04/26 19:39:41
Оглавление
- Introduction
- Preparations before use
- Using TANITA Wireless Remote Tabletop Display
- Troubleshooting
- Einleitung
- Vorbereitungen vor Gebrauch
- Verwendung der TANITA Remote-Tischanzeige mit Funkübertragung
- Fehlersuche
- Introduction
- Avant utilisation
- Utilisation de l'écran Déporté sans Fil (En Option)
- Dépannage
- Introductie
- Voorbereiding
- Gebruiken van een TANITA draadloos afstandbestuurd bureaudisplay
- Oplossen van problemen
- Introduzione
- Preparazione all’uso
- Uso dello schermo remoto wireless da tavolo TANITA
- Avvertenze e risoluzione dei problemi
- Introducción
- Preparaciones antes del uso
- Uso de la pantalla de escritorio remota inalámbrica de TANITA
- Resolución de fallos
- Введение
- Подготовка к использованию
- Использование беспроводного настольного дисплея TANITA
- Поиск неисправностей