Beko CHA 28021: GB Instruction for use

GB Instruction for use

Congratulations on your choice of a Quality

Appliance, designed to give you many years of service.

Safety first!

Do not connect your appliance to the electricity supply

until all packing and transit protectors have been

removed.

• Leave to stand for at least 4 hours before switching

on, to allow compressor oil to settle, if transported

horizontally.

• If you are discarding an old appliance with a lock or

latch fitted to the door, ensure that it is left in a safe

condition to prevent the entrapment of children.

• This appliance must only be used for its intended

purpose.

• Do not dispose of the appliance on a fire. Your

appliance contains non CFC substances in the

insulation which are flammable. We suggest you

contact your local authority for information on disposal

and available facilities.

• We do not recommend use of this appliance in an

unheated, cold room. (e.g. garage, conservatory,

annex, shed, out-house etc.)

To obtain the best possible performance and trouble

free operation from your appliance it is very important to

read these instructions carefully. Failure to observe

these instructions may invalidate your right to free

service during the guarantee period.

Please keep these instructions in a safe place for easy

reference.

capabilities or lack of experience and knowledge unless they have been given supervision or

instruction concerning use of the appliance by a person responsible for their safety.

Children should be supervised to ensure that they do not play with the appliance.

GB Instruction for use

Electrical requirements

Before inserting the plug into the wall socket

make sure that the voltage and the frequency

shown in the rating plate inside the appliance

corresponds to your electricity supply.

We recommend that this appliance is

connected to the mains supply via a suitably

switched and fused socket in a readily

accessible position.

Warning! This appliance must be earthed.

Repairs to electrical equipmen

performed by a qualified technician. Incorrect

repairs carried out by an unqualified person

are carry risks that may have critical

consequences for the user of the appliance.

ATTENTION!

This appliance operates with R600a which is

an environmental friendly but flammable gas.

During the transportation and fixing of the

product, care must be taken not to damage

the cooling system. If the cooling system is

damaged and there is a gas leakage from the

system, keep the product away from open

flame sources and ventilate the room for a

while.

WARNING - Do not use mechanical devices

or other means to accelerate the defrosting

process, others than those recommended by

the manufacturer.

WARNING - Do not damage the refrigerant

circuit.

WARNING - Do not use electrical appliances

inside the food storage compartments of the

appliance, unless they are of the type

recommended by the manufacturer.

Transportation instructions

an upright position. The packing as supplied

must be intact during transportation.

2. If during the transport the appliance, has

been positioned horizontally, it must not be

operated for at least 4 hours, to allow the

system to settle.

3. Failure to comply with the above

instructions could result in damage to the

appliance, for which the manufacturer will not

be held liable.

4. The appliance must be protected against

rain, moisture and other atmospheric

influences.

Important!

• Care must be taken while cleaning/carrying

the appliance not to touch the bottom of the

condenser metal wires at the back of the

and hands.

• Do not attempt to sit or stand on top of your

appliance as it is not designed for such use.

You could injure yourself or damage the

appliance.

under the appliance during and after moving,

as this could damage the cable.

• Do not allow children to play with the

appliance or tamper with the controls.

Installation instructions

1. Do not keep your appliance in a room

-15 degrees C (5 degrees F) at night and/or

especially in winter.

2. Do not place the appliance near cookers or

radiators or in direct sunlight, as this will

cause extra strain on the appliance's

functions. If installed next to a source of heat

or freezer, maintain the following minimum

side clearances:

From Cookers 30 mm

From Radiators 300 mm

From Freezers 25 mm

3. Make sure that sufficient room is provided

around the appliance to ensure free air

circulation (Item 2).

• Put the back airing lid to the back of your

refrigerator to set the distance between the

refrigerator and the wall (Item 3).

4. The appliance should be positioned on a

smooth surface. The two front feet can be

adjusted as required.To ensure that your

appliance is standing upright adjust the two

front feet by turning clockwise or anti-

clockwise, until firm contact is secured with

the floor. Correct adjustment of feet prevents

excessive vibration and noise (Item 4).

5. Refer to "Cleaning and Care" section to

prepare your appliance for use.

2