Panasonic HX025E: Supplied Accessories Attaching/Detaching the Lens

Supplied Accessories

Attaching/Detaching the Lens

[Inspection to be performed when you unpack

≥ Refer also to the camera’s operating instructions

the unit]

for attaching and detaching the lens.

When removing the unit from its packing box, check

∫ Attaching the Lens

that the main unit and the supplied accessories are

≥ Check that the camera is turned off.

there and also check their external appearance and

functions to verify that they have not sustained any

1 Turn the lens rear

damage during distribution and transportation.

cap to detach it.

If you discover any trouble, contact your vendor

A: Lens Rear Cap

before using the product.

Product numbers correct as of July 2011. These

may be subject to change.

123

4

2 Align the lens fitting

marks B (red marks) on

the camera body and the

lens and then rotate the

lens in the direction of

VFC4456 VYC1063 VYF3284

VFC4605

the arrow until it clicks.

• Do not press the lens release

1 Lens Storage Bag

button C when you attach a lens.

2 Lens Hood

• Do not try to attach the lens when holding it at an

3 Lens Cap

angle to the camera body as the lens mount may

4 Lens Rear Cap

get scratched.

(The lens rear cap and lens cap are attached to

• Check that the lens is attached correctly.

the interchangeable lens at the time of purchase.)

6

VQT3N28









VQT3N28_E.book 6 ページ ２０１１年５月２６日　木曜日　午前９時３４分

∫ Detaching the Lens

∫ Attaching the Lens Hood

≥ Check that the camera is turned off.

(Supplied Accessory)

While pressing on the

Insert the lens hood into the lens with the

lens release button D,

short sides at the top and bottom, and

rotate the lens toward the

turn in the direction of the arrow until it

arrow until it stops and

stops.

then remove.

• Attach the lens rear cap so

that the lens contact point

does not get scratched.

• Attach the body cap to the camera so no dirt or

dust will get inside the main unit.

E: Fit to the mark

∫ Attaching and Detaching the Lens Cap

• When taking pictures with the flash with the lens

Pinch the lens cap as shown in the figure

hood attached, the lower portion of the screen

to attach or detach.

may turn dark (vignetting effect) and the control

• Be careful not to lose

of the flash may be disabled because the photo

the lens cap.

flash may be obscured by the lens hood. We

recommend detaching the lens hood.

• When using the AF assist lamp in the dark,

detach the lens hood.

7

VQT3N28

VQT3N28_ENG.fm 7 ページ ２０１１年６月２８日　火曜日　午後２時５６分