Panasonic CS-A7JKD: PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

PRODUCT OVERVIEW & OPERATIONS PRODUCT OVERVIEW & OPERATIONS

Auto OFF/ON button

e-ion AIR PURIFYING SYSTEM

• Used when remote control is misplaced

or malfunction.

Do not touch during operation

Action Mode

Press once. Auto

e-ion fi lters e-ion charging wire Active e-ion Generator

Press and hold until 1 beep is

Cooling

heard, then release.

Press the button to turn off.

Front panel

INDICATOR

(Red/Orange/Blue)

(Green)

(Orange)

Receiver

(Orange)

(Orange)

(Blue)

Horizontal airfl ow

direction louver

• Manually

POWE

TO TURN ON OR OFF THE UNIT

adjustable.

Vertical airfl ow

direction louver

• Do not adjust

Maximum

by hand.

distances: 8m

Remote control

display

4

• Please be aware of the OFF indication on the remote control

display to prevent the unit from starting/stopping improperly.

TO SET TEMPERATURE

• For heat, cool and dry modes, the range of temperature for

selection is 16°C ~ 30°C.

• Operating the unit within the recommended temperature could

induce energy saving.

HEAT mode : 20˚C ~ 24˚C.

COOL mode : 26˚C ~ 28˚C.

DRY mode : 1˚C ~ 2˚C lower than room temperature.

TO SELECT OPERATION MODE

AUTO mode - For your convenience

• Unit selects the operation mode according to the room

temperature.

• Once auto mode is selected, the unit will operate at the standard

setting temperature.

• To change the standard setting temperature, press

for “HI”

or for “LO”.

Room

Operation

Standard setting

HI

LO

temperature

mode

temperature

(+2°C)

(-2°C)

23°C & above Cool 25°C 27°C 23°C

Below 23°C Dry 22°C 24°C 20°C

Below 20°C Heat 21°C 23°C 19°C

HEAT mode - To enjoy warm air

• In heat mode, it takes a while for the unit to warm up. The power

indicator blinks during this operation.

COOL mode - To enjoy cool air

DRY mode - To dehumidify the environment

• Unit operates at low fan speed to give a gentle cooling operation.

ENGLISH

5

TO SET THE TIMER

• To turn ON or OFF the unit at a preset time.

TIMER

Select ON or

Set the time. Confi rm.

OFF timer.

• To cancel ON or OFF timer, press or then

press .

• When ON Timer is set, the unit may start earlier (up

to 30 minutes) before the actual set time in order to

achieve the desired temperature on time.

• Timer operation is based on the clock set in the remote

control and repeats daily once set. For clock setting,

please refer to Remote Control Preparation at back

cover.

• If timer is cancelled manually or due to power failure,

you can restore the previous setting (once power is

resumed) by pressing .

TO SELECT FAN SPEED

(3 OPTIONS)

• For AUTO, the indoor fan speed is automatically

adjusted according to the operation mode.

TO ADJUST VERTICAL AIRFLOW

DIRECTION (5 OPTIONS)

• Keeps the room ventilated.

• If AUTO is set, the louvers swing up/down

automatically.

• In heat mode, the air blows horizontally for a while,

then starts to blow downwards and the airfl ow louver

start to swing left/right after the temperature rises.

TO ENJOY CLEAN & FRESH

AIR

• Generates negative ions to produce fresh air effect

and attract dust which will then be captured at the

positively charged e-ion fi lters.

PATROL SENSOR

TO MONITOR AIR

QUALITY

Indicator Air Quality

• Patrol sensor detects air

Blue Clean

quality.

Orange Moderate

OPTIONAL SETTINGS

• When air quality is at dirty

Red Dirty

level, e-ion operation will

Patrol starts automatically with the unit

start automatically.

switched on with .

POWERFUL NORMALQUIET

Press and hold for 5 seconds, then release

to disable or restore this setting.

TO ENJOY QUIET ENVIRONMENT

QUIET

Press and hold for 5 seconds to dim or

• This operation reduces airfl ow noise.

restore the unit’s indicator brightness.

TO ACHIEVE TEMPERATURE

Press and hold for approximately 10

QUICKLY

POWERFUL

seconds to show temperature setting in

• This operation will stop automatically

°C or °F.

after 15 minutes.

Press and hold for approximately 5 seconds

to show 12-hour (am/pm) or 24-hour time

indication.

Press to restore the remote control’s default

• , and can be activated in

setting.

all modes and can be cancelled by pressing the

respective button again.

Not used in normal operations.

•

and can not be selected at the same

Use curtains to screen off sunlight and outdoor heat to

time.

reduce power consumption during cool mode.

•

and can be activated even when the unit

is turned off. In this condition, fan speed and air swing

can not be adjusted.