Acme KB200: operation caution

GB

operation

Itisrecommendedtousethekettleforseveraltimesfollowinginstructionsgivenbelowandtoremoveremaining

waterbeforerstusage.Thiswillremoveanymaterialsordustremainedintheappliancefromthemanufacturing

process.

1.OpenthelidbyturningtheLidupwhilepressingtheLidbuttonandpourwaterintothekettle.Thenreplacethe

lid,otherwisethekettlewouldnotbeabletoturnothepowerautomaticallyafterwaterhasboiled.

Caution: the lled water level must be between the “Max” and “Min” level as indicated on the housing. Too little water

will damage the heat element and if the kettle is overlled, boiling water may splash out.

2.Replacethekettleonthepowerbaseandconnecttopowersupply.Positionthekettlesothatthespoutofthe

kettleisfacingawayfromyou.

3.Presstheswitchbuttonto“I”positionandthelightwillashon.Andwaterwillstarttoheatup.Donotopenthe

lidwhilethewaterisboiling.

Caution: Ensure that the switch is clear of obstructions and the lid is rmly closed. The kettle will not turn o if the switch

is constrained or if the lid is left open.

4.Powerwillbecutoautomaticallyandtheswitchwillbebackto“0”positiononcewaterhasbeenboiled.And

thelightwillbeo.

5.Liftthekettlefromthepowerbaseandthenpourthewater.

Note: Be careful when pouring water from the kettle, as boiling water

may cause scalding.

6.Theboilingprocesscanbeterminatedatanytimebyliftingthe

kettleothepowerbaseorpressingtheswitchto“0”position.

caution

• Neverusetheappliancewhenitisempty.Ifsuchsituationwilloccur,thethermalcut-oinsidethekettlewould

turnothepowerautomatically.Unplugtheapplianceandletitcooldowncompletely.

• Theltermustbeinplaceduringtheworkoftheapplianceotherwisewaterspillagemayoccur.

Note: Ensure the power is turned o while the kettle is not in use.

5