Acme IB-100: suggestions before using the iron for the first time preparing for use How to ll the water tank
suggestions before using the iron for the first time preparing for use How to ll the water tank: Acme IB-100
Table of contents
- introduction important safeguards READ ALL INSTRUCTIONS BEFORE USING
- 15. Never let young children play with the appliance.
- special instructions Important precautions
- getting to know your iron
- suggestions before using the iron for the first time preparing for use How to ll the water tank
- Selecting the temperature
- using the appliance Steam ironing
- features Shot of steam Anti-drip function Automatic Anti-Calc function
- cleaning storage troubleshooting The iron emits a foul smell or gives o smoke
- The iron does not heat The iron does not produce steam The “Shot of steam” feature does not work The “Water spray” feature does not work Anti-drip function
GB
suggestions before using
the iron for the first time
1. Certain parts of the iron have been lightly greased; therefore the iron could give o a little
smoke when plugged in for the rst time. This will cease after a short while.
2. Before using the iron for the rst time, remove the plastic protector from the soleplate (if
present). Clean the soleplate with a soft cloth.
3. Keep the soleplate very smooth. Do not run it over metal objects (such as against the
uncovered ironing board, buttons, zips etc).
4. Pure wool garments (100% wool) can be ironed with the appliance in the steam position. You
should select preferently a high steam position and use a dry ironing cloth.
preparing for use
How to ll the water tank
1. Unplug the iron.
2. Set the steam button to the dry ironing position. (Fig. 1)
3. Fill the tank through the lling hole. (Fig. 2)
- If water from the tap is too hard, it is advisable to use only distilled or demineralized water.
- Do not use chemically de-scaled or perfumed water.
Always empty the iron from the excess water remaining in the tank before storing it.
8
