Acme IB-100: features Shot of steam Anti-drip function Automatic Anti-Calc function
features Shot of steam Anti-drip function Automatic Anti-Calc function: Acme IB-100
Table of contents
- introduction important safeguards READ ALL INSTRUCTIONS BEFORE USING
- 15. Never let young children play with the appliance.
- special instructions Important precautions
- getting to know your iron
- suggestions before using the iron for the first time preparing for use How to ll the water tank
- Selecting the temperature
- using the appliance Steam ironing
- features Shot of steam Anti-drip function Automatic Anti-Calc function
- cleaning storage troubleshooting The iron emits a foul smell or gives o smoke
- The iron does not heat The iron does not produce steam The “Shot of steam” feature does not work The “Water spray” feature does not work Anti-drip function
GB
features
Water spray
1. The spray function can be used in any position, either in dry or steam ironing, as long there is
water in the water tank.
2. Press the spray button to use this function.
Note: When using this function for the rst time, the spray button may have to be pressed repeatedly
Shot of steam
The “Shot of steam” function produces extra steam for removing persistent wrinkles.
1. Set the temperature control dial to the “Max” position (Fig. 3) and wait until the pilot light goes
out.
2. Wait for a few seconds before pressing again, for the steam to penetrate deeply into the bre.
Note: For the best steam quality, do not use more than three successive bursts each time. Some
pumping action is needed to start this function.
Excessive use of this feature will cause the iron to cool, therefore ensure that the pilot light is out
before operating the “Shot of steam” control.
Anti-drip function
This function automatically stops producing steam when the temperature is too low to prevent
water from dripping out of the soleplate.
Automatic Anti-Calc function
The built-in Anti-Calc system reduces the build-up of scale and guarantees a long life for the iron.
11
