Acme IA-200: SUGGESTIONS BEFORE USING THE IRON FOR THE FIRST TIME steam ironing
SUGGESTIONS BEFORE USING THE IRON FOR THE FIRST TIME steam ironing: Acme IA-200
Table of contents
- introduction important safeguards READ ALL INSTRUCTIONS BEFORE USING
- 11. The iron must only be used and rested on a stable surface.
- special instructions SAVE THESE INSTRUCTIONS
- description of device
- ANTI-CALC SYSTEM ANTI-DRIP SYSTEM AUTOMATIC SHUT OFF (for model IA-200)
- general instructions PREPARATIONS
- SUGGESTIONS BEFORE USING THE IRON FOR THE FIRST TIME steam ironing
- Selecting the temperature Selecting the steam
- Selecting Shot of steam and steam when ironing vertically. dry ironing
- cleaning self-cleaning how to put it away
- advice for good ironing
- troubleshooting
GB
SUGGESTIONS BEFORE USING THE IRON FOR THE FIRST TIME
1. Certain parts of the iron have been lightly greased; therefore the iron could give o a little
smoke when plugged in for the rst time. This will cease after a short time.
2. Before using the iron for the rst time, remove the plastic protector from the soleplate (if
present). Clean the soleplate with a soft cloth.
3. Keep the soleplate very smooth. Do not run it over metal objects (such as against the uncovered
ironing board, buttons, zips etc).
4. Pure wool garments (100% wool) can be ironed with the appliance in the steam position. You
should select preferentially a high steam position and use a dry ironing cloth.
steam ironing
Filling the reservoir
- Check that the plug is disconnected from the socket.
- Move the steam selector (3) to
[Fig. 1].
- Open the lid (2).
- Raise the tip of the iron to help the water enter the opening without overowing.
- Slowly pour the water into the tank and taking care not to go over the maximum level (about
300ml) indicated by “MAX” on the tank [Fig. 2].
- Close the lid (2).
10
