Alexika ROLLER 10 basic: Error codes

15

Error codes

IKA

®

Roller 6/10 basic

In case of a fault, a beep is heard and the “Power” LED fl ashes.

Proceed as follows in such cases:

 

Switch the device off.

 

Perform corrective measures as described below.

 

Perform a restart.

Error

Cause

Effect

Solution

Motor blockage or overload

Motor off

- Switch the device off.

- Reduce the load on the motor and check all moving parts for 

  freedom of movement.

- Then perform a restart.

If the actions described fail to resolve the fault or another error code is displayed then take one of the following steps:

- Contact the 

IKA

®

 service department,

- Send the device for repair, including a short description of the fault.

IKA

®

Roller 6/10 digital

The fault is shown by an error code in the display as following if the error occurs, e.g. Er 4.

Proceed as follows in such cases:

 

Switch the device off.

 

Perform corrective measures as described below.

 

Perform a restart.

Error

Cause

Effect

Solution

Er 3

Temperature inside device is too

high

Motor off

- Switch the device off.

- Allow the device to cool down.

Er 4

Motor blockage or overload

Motor off

- Switch the device off.

- Reduce the load on the motor and check all moving parts for 

  freedom of movement.

- Then perform a restart.

If the actions described fail to resolve the fault or another error code is displayed then take one of the following steps:

- Contact the 

IKA

®

 service department,

- Send the device for repair, including a short description of the fault.

Food 

water containing detergent

Fuels 

water containing detergent

Other materials 

please consult 

IKA

®

Spare parts order

When ordering spare parts, please give:

- Machine type

- Manufacturing number, see type plate

- Item and designation of the spare part, see 

www.ika.com

, 

spare parts diagram and spare parts list

Repair

In case of repair the device has to be cleaned and free from any 

materials which may constitute a health hazard.

For this you should use the downloaded print of the "Certifi cate 

of compliance" form from the 

IKA

®

 website 

www.ika.com

.

If you require servicing, return the appliance in its original pa-

ckaging. Storage packaging is not suffi  cient. Please also use sui-

table transport packaging.

The device operates maintenance-free.

For cleaning disconnect the main plug.

- Wear protective gloves when cleaning the devices.

- Do not place electrical appliances into the cleaning agents for 

cleaning purposes.

- Do not allow moisture to get into the appliance when cleaning.

- Please consult with 

IKA

®

 before using any cleaning or deconta-

mination methods, other than those recommended here.

Only clean 

IKA

®

 appliances using these 

IKA

®

 approved cleaning 

agents:

Dirt 

Cleaning agent

Dyes isopropanol

Building materials 

water containing detergent, 

 isopropanol

Cosmetics 

water containing detergent,

 isopropanol

Maintenance and cleaning