Beko WMD 25100 R: Program Selection and Starting Machine

Program Selection and Starting Machine: Beko WMD 25100 R

Program Selection and Starting Machine

4

Plug you machine to outlet. Turn on the machine by press-

perature. Select convenient spin speed related to selected

ing “On / Off” key. Open the door by pulling the handle and

program. If you are using auxiliary function press desired

load the machine without exceeding loading capacity and

auxiliary function key.

close the door. Specify the appropriate program by looking

Afterwards place appropriate detergent and softener to

at program selection table according to type of laundry,

your machine’s detergent drawer. Start your machine by

degree of soiledness and washing temperature. Position

pressing Start/Pause/Cancel button. Start/Pause/Cancel

program selection key to desired washing program-tem-

key’s led will be on. After your machine starts, you can fol-

13

Program selection table

Programme

Max. Load (kg)

Programme Duration (~min)

Water Consumption (l)

Energy Consumption (kWh)

Quick Wash

Rinse Plus

Anti-Creasing

Rinse Hold

Spin speed reduction

No Spin

Cottons 90 5 150 50 1.70

Cottons 60** 5 140 47 0.95

• : Selectable

Cottons 40 5 125 47 0.65

* : Automatically selected, not cancel-

lable.

Intensive 60 5 160 55 1.00

**: Energy Label programme (EN 60456)

Babycare 65 5 170 60 1.00 *

Water and power consumption and

Synthetics 60 2.5 115 50 0.95

program duration may differ from the

Synthetics 40 2.5 105 50 0.55

table subject to changes in water pres-

sure, water hardness and temperature,

Mix 40 3.5 95 45 0.50

ambient temperature, type and amount

Delicate 40 2 70 55 0.35

of laundry, selection of auxiliary functions,

and changes in electric voltage.

Woollens 40 1.5 55 50 0.30

Hand wash 30 1 40 35 0.15

C The auxiliary functions in the table

may differ according to the model of your

Mini 30 2.5 30 45 0.25

machine.

14

Pressing “On/Off”

By pressing “On/Off” button you can make your machine

ready for selecting program. When “On/Off” key is pressed

“door” led will light on meaning “door can open”. Press

“On/Off” key again for turning your machine off.

Pressing “On/Off” does not mean program started opera-

tion. You must press “Start/Pause/Cancel” for starting the

program.

Function Selection

Additional functions selectable according to selected

program can be selected by pressing related key. Led of

selected function will be on.

If not selected together some additional functions go off

when it is not selected with other one. For example; when

using cotton program, exspress and rinse plus auxillary

functions can not be selected together. After selecting

Child-proof lock

express program, if rinse plus key is pressed fast program

During washing laundry in order to maintain that program

will be on and express function led will go off.

progress is not affected by pressing keys by children there

is child-proof lock. To enable child-proof lock, after wash-

Program Progress

ing begins, press Express and Rinse Plus function buttons

After machine starts operation relevant program led on

together simultaneously for three seconds. Pre-wash ad-

program progress display will be on. When a step is com-

ditional function led will always blink.

pleted that step’s led is off and next step’s led is on. When

“On/Off button is pressed “door” led will be on. After wash-

After program ends in order to start a new program or alter

ing program is selected when “Start/Pause/Cancel” key is

the program you have to disable child-proof lock. To do

pressed “Washing” led on program progress display will be

this press same buttons for three seconds and Child-proof

on. At the nal step “Spin cycle” led is on. When program

lock led will be off.

15

is completed “Ready” led will be on again.

“door” led on program progress display is on and laundry

During machine operation you can press “Start/Pause/

can be added to the machine. If “door” led is not on after

Cancel” key for getting machine to “Pause” position. In this

one minute than water level in the machine is not appropri-

case “Start/Pause/Cancel” led will blink.

ate and laundry can not be added. You can press “Start/

Pause/Cancel” key for continuing program.

Changing Program

You can use this feature for washing laundry in the same

Time delay for program start

textile group for washing at lower or higher temperatures.

Using time delay key you can delay the starting of the se-

For example, instead of Cotton60, Cotton40 can be used.

lected program for 3 hours, 6 hours or 9 hours.

For selecting Cotton40 instead of Cotton60 by pressing

When time delay key is pressed once 3hours delay is

“Start/Pause/Cancel” key machine is switched to pause

adjusted and led will light on. If same key is pressed once

position. Program knob is turned for selecting Cotton40

more delay is 6hours, and if it is pressed once more 9

program.

hours delay is selected. If time delay key is pressed again

Even when the program selection button is changed during

delay is cancelled. After the selection of time delay when

the program initially selected program will be executed. For

“Start/Pause/Cancel” is pressed program can be started

changing washing program continuing program must be

with delay. During delay period door can be opened or

cancelled. (See Cancelling a program)

laundry can be added

For selecting auxillary functions or spin speed necessary

After time delay is initiated by pressing “Start/Pause/Can-

changes can be performed after pressing Start/Pause/

cel” you can switch machine to “Pause” mode and change

Cancel button. Although selected auxillary functions must

delay time.

be compatible with washing program. For example when

your machine is intensive program you can select additional

rinse plus function but you can not select express.

Adding laundry

If you want to add laundry to your machine after program

begins press Start/Pause key for switching machine to

pause mode. If water level in the machine is appropriate

16

Canceling a Program

End of Program

For canceling a program “Start/Pause/Cancel” key is

When program ends “ door” led will light on and door can

pressed for three seconds. After this period “Start/Pause/

be opened and machine is ready for next washing. Press

Cancel” and all other leds will be off .You can select a new

“On/Off” for turning machine off.

program and start washing.

If cancel task is performed during washing “Spin” led on

display will light on, machine will pump and when “Spin” led

is off “door” led will be on, door can be opened and new

program can be selected.

Even program selection button is changed during the

program initially selected program will be executed. For

changing washing program “Canceling a program” must be

performed afterwards new program can be selected and

Emptying Laundry

started

After program ends machine automatically stops. Turn off

After machine starts operation even if spin speed or wash-

tap water. Pull the handle and open loading door. Turn off

ing temperature is changed, initial speed and temperature

your machine by pressing “On/Off”. After taking laundry

is valid. In order to change spin speed or temperature after

out keep the loading door open and let the drum ventilate.

pressing “Start/Pause/Cancel” new cycle or temperature

Check the bellow and clean.

can be selected.

17