Beko WMD 25080 R: Program Selection and Starting Machine
Program Selection and Starting Machine: Beko WMD 25080 R
Program Selection and Starting Machine
4
Plug you machine to outlet. Turn on the machine by press-
perature. Select convenient spin speed related to selected
ing “On / Off” key. Open the door by pulling the handle and
program. If you are using auxiliary function press desired
load the machine without exceeding loading capacity and
auxiliary function key.
close the door. Specify the appropriate program by looking
Afterwards place appropriate detergent and softener to
at program selection table according to type of laundry,
your machine’s detergent drawer. Start your machine by
degree of soiledness and washing temperature. Position
pressing Start/Pause/Cancel button. Start/Pause/Cancel
program selection key to desired washing program-tem-
key’s led will be on. After your machine starts, you can fol-
13
Program selection table
Programme
Max. Load (kg)
Programme Duration (~min)
Water Consumption (l)
Energy Consumption (kWh)
Quick Wash
Rinse Plus
Anti-Creasing
Rinse Hold
Spin speed reduction
No Spin
Cottons 90 5 150 50 1.70 • • • • • •
Cottons 60** 5 140 47 0.95 • • • • • •
• : Selectable
Cottons 40 5 125 47 0.65 • • • • • •
* : Automatically selected, not cancel-
lable.
Intensive 60 5 160 55 1.00 • • • •
**: Energy Label programme (EN 60456)
Babycare 65 5 170 60 1.00 * • • •
Water and power consumption and
Synthetics 60 2.5 115 50 0.95 • • • • • •
program duration may differ from the
Synthetics 40 2.5 105 50 0.55 • • • • • •
table subject to changes in water pres-
sure, water hardness and temperature,
Mix 40 3.5 95 45 0.50 • • • • • •
ambient temperature, type and amount
Delicate 40 2 70 55 0.35 • • • • •
of laundry, selection of auxiliary functions,
and changes in electric voltage.
Woollens 40 1.5 55 50 0.30 • • • •
Hand wash 30 1 40 35 0.15 • •
C The auxiliary functions in the table
may differ according to the model of your
Mini 30 2.5 30 45 0.25 • •
machine.
14
Pressing “On/Off”
By pressing “On/Off” button you can make your machine
ready for selecting program. When “On/Off” key is pressed
“door” led will light on meaning “door can open”. Press
“On/Off” key again for turning your machine off.
Pressing “On/Off” does not mean program started opera-
tion. You must press “Start/Pause/Cancel” for starting the
program.
Function Selection
Additional functions selectable according to selected
program can be selected by pressing related key. Led of
selected function will be on.
If not selected together some additional functions go off
when it is not selected with other one. For example; when
using cotton program, exspress and rinse plus auxillary
functions can not be selected together. After selecting
Child-proof lock
express program, if rinse plus key is pressed fast program
During washing laundry in order to maintain that program
will be on and express function led will go off.
progress is not affected by pressing keys by children there
is child-proof lock. To enable child-proof lock, after wash-
Program Progress
ing begins, press Express and Rinse Plus function buttons
After machine starts operation relevant program led on
together simultaneously for three seconds. Pre-wash ad-
program progress display will be on. When a step is com-
ditional function led will always blink.
pleted that step’s led is off and next step’s led is on. When
“On/Off button is pressed “door” led will be on. After wash-
After program ends in order to start a new program or alter
ing program is selected when “Start/Pause/Cancel” key is
the program you have to disable child-proof lock. To do
pressed “Washing” led on program progress display will be
this press same buttons for three seconds and Child-proof
on. At the nal step “Spin cycle” led is on. When program
lock led will be off.
15
is completed “Ready” led will be on again.
“door” led on program progress display is on and laundry
During machine operation you can press “Start/Pause/
can be added to the machine. If “door” led is not on after
Cancel” key for getting machine to “Pause” position. In this
one minute than water level in the machine is not appropri-
case “Start/Pause/Cancel” led will blink.
ate and laundry can not be added. You can press “Start/
Pause/Cancel” key for continuing program.
Changing Program
You can use this feature for washing laundry in the same
Time delay for program start
textile group for washing at lower or higher temperatures.
Using time delay key you can delay the starting of the se-
For example, instead of Cotton60, Cotton40 can be used.
lected program for 3 hours, 6 hours or 9 hours.
For selecting Cotton40 instead of Cotton60 by pressing
When time delay key is pressed once 3hours delay is
“Start/Pause/Cancel” key machine is switched to pause
adjusted and led will light on. If same key is pressed once
position. Program knob is turned for selecting Cotton40
more delay is 6hours, and if it is pressed once more 9
program.
hours delay is selected. If time delay key is pressed again
Even when the program selection button is changed during
delay is cancelled. After the selection of time delay when
the program initially selected program will be executed. For
“Start/Pause/Cancel” is pressed program can be started
changing washing program continuing program must be
with delay. During delay period door can be opened or
cancelled. (See Cancelling a program)
laundry can be added
For selecting auxillary functions or spin speed necessary
After time delay is initiated by pressing “Start/Pause/Can-
changes can be performed after pressing Start/Pause/
cel” you can switch machine to “Pause” mode and change
Cancel button. Although selected auxillary functions must
delay time.
be compatible with washing program. For example when
your machine is intensive program you can select additional
rinse plus function but you can not select express.
Adding laundry
If you want to add laundry to your machine after program
begins press Start/Pause key for switching machine to
pause mode. If water level in the machine is appropriate
16
Canceling a Program
End of Program
For canceling a program “Start/Pause/Cancel” key is
When program ends “ door” led will light on and door can
pressed for three seconds. After this period “Start/Pause/
be opened and machine is ready for next washing. Press
Cancel” and all other leds will be off .You can select a new
“On/Off” for turning machine off.
program and start washing.
If cancel task is performed during washing “Spin” led on
display will light on, machine will pump and when “Spin” led
is off “door” led will be on, door can be opened and new
program can be selected.
Even program selection button is changed during the
program initially selected program will be executed. For
changing washing program “Canceling a program” must be
performed afterwards new program can be selected and
Emptying Laundry
started
After program ends machine automatically stops. Turn off
After machine starts operation even if spin speed or wash-
tap water. Pull the handle and open loading door. Turn off
ing temperature is changed, initial speed and temperature
your machine by pressing “On/Off”. After taking laundry
is valid. In order to change spin speed or temperature after
out keep the loading door open and let the drum ventilate.
pressing “Start/Pause/Cancel” new cycle or temperature
Check the bellow and clean.
can be selected.
17
Оглавление
- Technical Features of Your Washing Machine
- Your Washing Machine
- Warning
- Preparation
- Control Panel
- Auxiliary Functions
- Program Selection and Starting Machine
- Care and maintanence
- Installation
- Helpful tips on stain removal
- Before calling service
- Содержание
- Технические особенности Вашей стиральной машины
- Ваша Стиральная машина
- Предостережения по безопасности работы с машиной
- Подготовка к стирке
- Пульт управления
- Вспомогательные Функции
- Выбор программы и запуск машины
- Таблица выбора программ
- Уход за машиной и техническое обслуживание
- Установка